![header thumbnail](/images/img-default-logo.png)
EN ISO 7438:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/img-default-logo.png)
Metallic materials - Bend test (ISO 7438:2016)
29-10-2020
27-01-2016
European foreword
Foreword
1 Scope
2 Symbols and designations
3 Principle
4 Test equipment
5 Test piece
6 Procedure
7 Interpretation of results
8 Test report
Annex A (informative) - Determination of the bend angle
from the measurement of the displacement of the
former
ISO 7438:2016 specifies a method for determining the ability of metallic materials to undergo plastic deformation in bending.ISO 7438:2016 applies to test pieces taken from metallic products, as specified in the relevant product standard. It is not applicable to certain materials or products, for example tubes in full section or welded joints, for which other standards exist.
Committee |
CEN/TC 459/SC 1
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ONORM EN ISO 7438 : 2016 | Identical |
ISO 7438:2016 | Identical |
NBN EN ISO 7438 : 2016 | Identical |
NEN EN ISO 7438 : 2016 | Identical |
NS EN ISO 7438 : 2000 | Identical |
I.S. EN ISO 7438:2016 | Identical |
PN EN ISO 7438 : 2016 | Identical |
SN EN ISO 7438 : 2016 | Identical |
UNI EN ISO 7438 : 2005 | Identical |
SS-EN ISO 7438 : 2016 | Identical |
UNI EN ISO 7438:2016 | Identical |
UNE-EN ISO 7438:2016 | Identical |
BS EN ISO 7438:2016 | Identical |
NF EN ISO 7438 : 2005 | Identical |
DIN EN ISO 7438:2016-07 | Identical |
PN-EN ISO 7438:2021-04 | Identical |
UNI EN 15512 : 2009 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
DIN 4099-2:2003-08 | WELDING OF REINFORCING STEEL - PART 2: QUALITY ASSURANCE |
I.S. EN 10349:2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
UNI EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
DIN EN 10349:2010-02 | Steel castings - Austenitic manganese steel castings |
06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
UNI EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
I.S. EN 15512:2009 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
UNE-EN 15512:2010 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
17/30359541 DC : 0 | BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
BS EN 1301-1:2008 | Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
BS EN 14286:2008 | Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods |
I.S. EN 14276-1:2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
UNI EN 508-3 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
I.S. EN 14870-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
EN 12805:2002 | Automotive LPG components - Containers |
EN 508-3:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
PREN 13605 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
PREN 13601 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
BS EN 10349:2009 | Steel castings. Austenitic manganese steel castings |
11/30239494 DC : 0 | BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
17/30337809 DC : DRAFT JAN 2017 | BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
07/30168410 DC : DRAFT DEC 2007 | BS EN 508-3 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
PREN 13600 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
07/30145003 DC : DRAFT JAN 2007 | EN 1386 - ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS |
PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
PREN 12797 : DRAFT 2017 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
DIN EN 508-3:2009-07 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
I.S. EN 1386:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS |
I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
I.S. EN 1301-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
EN 15512:2009 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
I.S. EN 14286:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
I.S. EN 508-3:2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
I.S. EN 10149-1:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
NF EN 14276-1 : 2006 + A1 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
I.S. EN 502:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
UNI EN 14870-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
UNI EN 502 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
UNI EN 14286 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
UNI EN 10149-1 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
11/30239491 DC : 0 | BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
12/30264373 DC : 0 | BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
11/30240456 DC : 0 | BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
NF EN 10349 : 2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
DIN EN 1386:2008-05 | Aluminium and aluminium alloys - Tread plate - Specifications |
DIN EN 14276-1:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
UNE-EN 508-3:2010 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
UNI EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
UNI EN 13599 : 2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
EN 14870-1:2011 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
UNI EN 1301-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
UNI EN 13604 : 2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
UNE-EN 10349:2011 | Steel castings - Austenitic manganese steel castings |
DIN EN 10149-1:2013-12 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 10349 : 2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
11/30240465 DC : 0 | BS EN 13604 - COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
11/30240468 DC : 0 | BS EN 13605 - COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
11/30240453 DC : 0 | BS EN 13600 - COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
PREN 13604 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
07/30166426 DC : 0 | BS EN 10349 - STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
DIN EN 15512 E : 2010 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
PREN 502 : DRAFT 2012 | ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
DIN EN 502:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
BS EN 12805:2002 | Automotive LPG components. Containers |
BS EN 502:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
UNE-EN 13148:2012 | Copper and copper alloys - Hot-dip tinned strip |
BS EN 508-3:2008 | Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet Stainless steel |
EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
BS EN 14276-1 : 2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
UNE-EN 10149-1:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
UNE-EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
BS EN 14870-1:2011 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
BS EN 1386:2007 | Aluminium and aluminium alloys. Tread plate. Specifications |
UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
BS EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
EN 1386:2007 | Aluminium and aluminium alloys - Tread plate - Specifications |
EN 14870-2:2004 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
BS EN 15512:2009 | Steel static storage systems. Adjustable pallet racking systems. Principles for structural design |
DIN EN 15512:2010-09 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
07/30164617 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
06/30151880 DC : 0 | BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
PREN 10149-1 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
DIN EN 14286 E : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
BS EN 14870-2:2004 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings |
BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
EN 1301-1:2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
EN 10349:2009 | Steel castings - Austenitic manganese steel castings |
EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
DIN EN 14286:2008-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
UNE-EN 14276-1:2007 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.