![header thumbnail](/images/img-default-logo.png)
EN ISO 8062-3 : 2007 COR 2009
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
11-03-2009
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Tolerance grades
5.1 General
5.2 Dimensional casting tolerance grades (DCTG)
5.3 Geometrical casting tolerance grades (GCTG)
6 Surface mismatch (SMI)
7 Wall thickness
8 Required machining allowances (RMA)
8.1 General
8.2 Required machining allowance grades (RMAG)
9 Indication on drawings
9.1 Indication of general dimensional casting tolerances
9.2 Indication of required machining allowances
9.3 Indication of geometrical casting tolerances
10 Rejection
Annex A (informative) Casting tolerances and geometrical
tolerances
Annex B (informative) Required machining allowance grades
(RMAG)
Annex C (informative) Concept of general tolerancing of
characteristics
Annex D (informative) Datums for general geometrical tolerances
Annex E (informative) Application of general geometrical
tolerances for castings
Annex F (informative) Relation to the GPS matrix model
Bibliography
Describes general dimensional and geometrical tolerances, as well as machining allowance grades, for castings as delivered to the purchaser in accordance with ISO 8062-2.
Committee |
TC 190
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
ONORM EN ISO 8062-3 : 2009 | Identical |
DS EN ISO 8062-3 : 2007 COR 2009 | Identical |
BS EN ISO 8062-3:2007 | Identical |
NBN EN ISO 8062-3 : 2007 COR 2009 | Identical |
UNE-EN ISO 8062-3:2009 | Identical |
ISO 8062-3:2007/Cor 1:2009 | Identical |
NF EN ISO 8062-3 : 2007 | Identical |
I.S. EN ISO 8062-3:2007 | Identical |
DIN EN ISO 8062-3 E : 2008 | Identical |
SN EN ISO 8062-3 : 2007 CORR 2009 | Identical |
NS EN ISO 8062-3 : 2007 AC 2009 | Identical |
PN EN ISO 8062-3 : 2009 | Identical |
NEN EN ISO 8062-3 : 2007 C1 2009 | Identical |
UNI EN ISO 8062-3 : 2009 | Identical |
DIN EN ISO 8062-3:2008-09 | Identical |
ISO 8062-3:2007 | Identical |
DIN 469:2014-06 | CRANK HANDLES, STRAIGHT PATTERN |
09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
UNI EN 10340 : 2008 | STEEL CASTINGS FOR STRUCTURAL USES |
I.S. EN 15776:2011 | UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15% |
UNE-EN 15776:2011 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % |
DIN EN 1982:2016-01 (Draft) | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
UNE-EN 1706:2011 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
BS EN 10340:2007 | Steel castings for structural uses |
BS EN 15272-4:2007 | Inland navigation vessels. Equipment for rope leading Rope lead |
BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
CEN/TR 16749:2014 | Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products |
PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
DIN 468:2014-06 | CRANK HANDLES, OFFSET TYPE |
DIN EN 15776:2016-01 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % (includes Amendment A1:2015) |
I.S. EN 13445-6:2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
EN 1982:2017 | Copper and copper alloys - Ingots and castings |
DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
I.S. EN 1982:2017 | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
VDI 3120:2015-06 | Cast steel wall thicknesses in large stamping and forming dies - Design references for tools with more than 1000 mm side length |
17/30347067 DC : 0 | BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL |
DIN CEN/TR 16749;DIN SPEC 31601:2015-02 | ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION OF DEFECTS AND IMPERFECTIONS IN HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CAST PRODUCTS |
UNI EN 15272-4 : 2008 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 4: ROPE LEAD |
BS EN 15776 : 2011 | UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15% |
EN 13445-6 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
17/30347070 DC : 0 | BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
DIN EN 1706:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
DIN EN 15272-4:2007-12 | Inland navigation vessels - Equipment for rope leading - Part 4: Rope lead |
DIN EN 10340:2008-01 | Steel castings for structural uses |
UNE-EN 1982:2018 | Copper and copper alloys - Ingots and castings |
BS EN 1706:2010 | Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
UNI EN 1706 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
DIN CEN/TR 16749;DIN SPEC 31601:2015-02 | ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION OF DEFECTS AND IMPERFECTIONS IN HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CAST PRODUCTS |
13/30274230 DC : 0 | BS EN 13445-6:2009/A1 - UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
BS EN 13445-6 : 2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
UNE-EN 13445-6:2015 | Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
PREN 10340-2 : DRAFT 2017 | STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
I.S. EN 1706:2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
EN 15776:2011+A1:2015 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 15272-4:2007 | Inland navigation vessels - Equipment for rope leading - Part 4: Rope lead |
PD CEN/TR 16749:2014 | Aluminium and aluminium alloys. Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products |
S.R. CEN/TR 16749:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION OF DEFECTS AND IMPERFECTIONS IN HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CAST PRODUCTS |
DIN EN 15776 E : 2016 | UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15% |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
EN 10340:2007/AC:2008 | STEEL CASTINGS FOR STRUCTURAL USES |
ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 8062-1:2007 | Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ISO 10579:2010 | Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.