EN ISO/IEC 10373 : 1995
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IDENTIFICATION CARDS - TEST METHODS
01-12-2001
12-01-2013
1 Scope
2 Normative references
3 Definitions
4 Default test environment and conditioning
5 Test methods
5.1 Card warpage
5.2 Dimensions of cards
5.3 Embossing relief height of character
5.4 Height and surface profile of the magnetic stripe
5.5 Surface roughness of the magnetic stripe
5.6 Wear test for magnetic stripe
5.7 Delamination
5.8 Resistance to chemicals
5.9 Amplitude measurements
5.10 Card dimensional stability and warpage with temperature
and humidity
5.11 Adhesion or blocking
5.12 Bending stiffness
5.13 Flammability
5.14 Light transmittance
5.15 Flux transition spacing variation
6 Test methods of the integrated circuit card
6.1 Dynamic bending stress (bending properties)
6.2 Dynamic torsion stress (torsion)
6.3 Location of contacts
6.4 Static electricity
6.5 Ultraviolet light
6.6 X-rays
6.7 Electrical resistance and impedance of contacts
6.8 Surface profile contacts
6.9 Vibrations
6.10 Electromagnetic fields
Describes test methods for the characteristics of identification cards.
| Committee |
TC 224
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNE-EN ISO/IEC 10373:1996 | Identical |
| BS EN ISO/IEC 10373:1995 | Identical |
| NS EN ISO/IEC 10373 : 1ED 1995 | Identical |
| I.S. EN ISO 10373:1995 | Identical |
| NF EN ISO/IEC 10373 : 1995 | Identical |
| ISO/IEC 10373:1993 | Identical |
| NEN EN ISO 10373 : 1995 | Identical |
| DIN EN ISO/IEC 10373:1995-10 | Corresponds |
| DIN EN ISO-IEC 10373 : 1995 | Corresponds |
| DIN EN ISO-IEC 10373 E : 1995 | Corresponds |
| SNV BS EN ISO/IEC 10373 : 1995 | Identical |
| I.S. EN ISO/IEC 7813:1997 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
| BS EN ISO/IEC 7811-5:1996 | Identification cards. Recording technique Location of read-write magnetic track. Track 3 |
| BS EN ISO/IEC 7811-2:1996 | Identification cards. Recording technique Magnetic stripe |
| BS EN ISO/IEC 7811-4:1996 | Identification cards. Recording technique Location of read-only magnetic tracks. Tracks 1 and 2 |
| I.S. EN ISO/IEC 7811-1:1997 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 1: EMBOSSING |
| DIN EN ISO/IEC 7810:1997-06 | IDENTIFICATION CARDS - PHYSICAL CHARACTERISTICS |
| I.S. EN ISO/IEC 7810:1997 | IDENTIFICATION CARDS - PHYSICAL CHARACTERISTICS |
| I.S. EN ISO/IEC 7811-5:1997 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 5: LOCATION OF READ-WRITE MAGNETIC TRACK - TRACKS 3 |
| I.S. EN ISO/IEC 7811-4:1997 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 4: LOCATION OF READ-ONLY MAGNETIC TRACKS - TRACKS 1 AND 2 |
| I.S. EN ISO/IEC 7811-2:1997 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE |
| ENV 1855 : DRAFT 1996 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR INTEGRATED CIRCUIT(S) CARD SYSTEMS - TOLERANCE RANGES FOR IC CARDS |
| EN ISO/IEC 7811-1 : 1996 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 1: EMBOSSING |
| EN ISO/IEC 7811-2 : 1996 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE |
| EN ISO/IEC 7813 : 1996 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
| EN 753-3 : 1999 | IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS |
| EN ISO/IEC 7811-5 : 1996 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 5: LOCATION OF READ-WRITE MAGNETIC TRACK - TRACKS 3 |
| EN ISO/IEC 7811-4 : 1996 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 4: LOCATION OF READ-ONLY MAGNETIC TRACKS - TRACKS 1 AND 2 |
| EN ISO/IEC 7810 : 1996 | IDENTIFICATION CARDS - PHYSICAL CHARACTERISTICS |
| DD ENV 1855:1996 | Identification card systems. Intersector integrated circuit(s) card systems. Tolerance ranges for IC cards |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| BS EN ISO/IEC 7810:1996 | Identification cards. Physical characteristics |
| BS EN 1332-2:1998 | Identification card systems. Man-machine interface Dimensions and location of a tactile identifier for ID-1 cards |
| EN 1332-2:1998 | Identification card systems - Man-machine interface - Part 2: Dimensions and location of a tactile identifier for ID-1 cards |
| ISO 1880:1979 | Instruments for the measurement of surface roughness by the profile method Contact (stylus) instruments of progressive profile transformation Profile recording instruments |
| ISO/IEC 7811-4:1995 | Identification cards — Recording technique — Part 4: Location of read-only magnetic tracks — Tracks 1 and 2 |
| ISO/IEC 7816-1:2011 | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
| ISO 105-E04:2013 | Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration |
| ISO/IEC 7813:2006 | Information technology Identification cards Financial transaction cards |
| ISO/IEC 7811-1:2014 | Identification cards Recording technique Part 1: Embossing |
| ISO/IEC 7816-2:2007 | Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| ISO/IEC 7811-3:1995 | Identification cards — Recording technique — Part 3: Location of embossed characters on ID-1 cards |
| ISO/IEC 7811-2:2014 | Identification cards Recording technique Part 2: Magnetic stripe Low coercivity |
| ISO 5-3:2009 | Photography and graphic technology Density measurements Part 3: Spectral conditions |
| ISO 5-1:2009 | Photography and graphic technology Density measurements Part 1: Geometry and functional notation |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO/IEC 7810:2003 | Identification cards Physical characteristics |
| ISO/IEC 7811-5:1995 | Identification cards — Recording technique — Part 5: Location of read-write magnetic track — Track 3 |
| ISO 5-2:2009 | Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.