ENV 1991-2-4 : 1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT)
01-04-2005
12-01-2013
Committees responsible
National foreword
National Application Document: Part A: Buildings
Introduction
1 Scope
2 References
3 Partial safety factors, combination factors and other
values
4 Notation
5 Additional recommendations
Annex A (normative) Photographs/diagrams of terrain
categories
Annex B (normative) Treatment of transition between terrain
categories
Annex C (normative) Treatment of minimum height and effect
of obstructions
Annex D (normative) Directional pressure coefficients for
buildings
Annex E (normative) Wind structure incorporating the
principles of BS 6399: Part 2
Table B.1 - Values of transition factor
Table D.1 - Dynamic pressure, qref in Pa (N/m2)
Table D.2 - Internal pressure coefficients for enclosed
buildings
Table D.3 - Internal pressure coefficients for buildings
with dominant openings
Table D.4 - Internal pressure coefficients for open sided
buildings
Table D.5 - External pressure coefficients for vertical
walls of rectangular-plan buildings
Table D.6 - Reduction factors for Zone A on vertical walls
of polygonal-plan buildings
Table D.7 - Pressure coefficients for vertical gable walls
adjacent to non-vertical walls and roofs
Table A.8 - Pressure for windward-facing non-vertical walls
Table D.9 - External pressure coefficients for flat roofs
with sharp eaves
Table D.10 - Reduction factor for Zones A to D of flat roofs
with parapets
Table D.11 - External pressure coefficients for flat roofs
with curved eaves
Table D.12 - External pressure coefficients for flat roofs
with mansard eaves
Table D.13 - External pressure coefficients for pitched roof
Zones A to J
Table D.14 - External pressure coefficients for pitched roof
Zones K to S
Table D.15 - External pressure coefficients for pitched roof
Zones U to Y of hipped roofs
Table D.16 - Reduction factor for multi-bay roofs
Figure 1 - United Kingdom - Wind map
Figure A.1 - Terrain category OzO = 0.003
Figure A.2 - Terrain category IzO = 0.01
Figure A.3 - Terrain category IIzO = 0.05
Figure A.4 - Terrain category IIIzO = 0.03
Figure A.5 - Terrain category IVzO = 1.0
Figure B.1 - Transition zones at change of roughness category
Figure B.2 - Determination of vm (z) after change of
roughness
Figure B.3 - ce (z) values for transition from category 0 to
category 1
Figure B.4 - ce (z) values for transition from category 1 to
category 2
Figure B.5 - ce (z) values for transition from category 2 to
category 3
Figure B.6 - ce (z) values for transition from category 3 to
category 4
Figure B.7 - ce (z) values for transition from category 1 to
category 3
Figure B.8 - ce (z) values for transition from category 1 to
category 4
Figure C.1 - Effective heights
Figure D.1 - Wind directions for a rectangular-plan building
Figure D.2 - Size effect factor
Figure D.3 - Definition of diagonal of loaded areas
Figure D.4 - Key to global force Fw
Figure D.5 - Key for vertical walls of buildings
Figure D.6 - Key to vertical gable walls
Figure D.7 - Key for walls of buildings with re-entrant
corners
Figure D.8 - Key for walls of buildings with recessed bays
Figure D.9 - Key to flush irregular walls
Figure D.10 - Key for walls of inset storey
Figure D.11 - Key to general method for flat roofs
Figure D.12 - Examples of zones of flat roof of arbitrary
plan shape
Figure D.13 - Definitions of crosswind breadth, inwind depth
and wide angle
Figure D.14 - Key to eave details for flat roofs
Figure D.15 - Additional zones around inset storey
Figure D.16 - Key to monopitch roofs
Figure D.17 - Symmetries for pitched roofs
Figure D.18 - Key for duopitch roofs
Figure D.19 - Key for hipped roofs
Figure D.20 - Key for mansard and multipitch roofs
Figure D.21 - Types of multi-bay roofs
Figure D.22 - Key to multi-bay roofs
List of references
National Application Document - Part B: Bridges
Contents
Foreword
Objectives of the Eurocodes
Background to the Eurocode Programme
Eurocode Programme
National Application Documents (NAD's)
Matters Specific to this Prestandard
1 General
1.1 Scope
1.1.1 Scope of ENV 1991-Eurocode 1
1.1.2 Scope of ENV 1991-2-4 Wind Actions
1.1.3 Further Parts of ENV 1991
1.2 Normative references
1.3 Distinction between principles and application
rules
1.4 Definitions
1.5 Symbols
2 Classification of actions
3 Design situations
4 Representation of action
4.1 Explanation of the wind actions and the response
of the structures
4.2 Modeling of wind actions
4.3 Requirements for testing
5 Wind pressure on surface
5.1 Field of application
5.2 External pressure
5.3 Internal pressure
5.4 Net pressure
6 Wind forces
6.1 Wind forces from pressures
6.2 Friction force
7 Reference wind
7.1 Reference wind pressure
7.2 Reference wind velocity
7.3 Annual probabilities of exceedence other than
0.02
7.4 Wind maps and meteorological information
8 Wind parameters
8.1 Mean wind velocity
8.2 Roughness coefficient
8.3 Terrain categories
8.4 Topography coefficient
8.5 Exposure coefficient
9 Choice of procedures
9.1 General
9.2 Criteria for the Choice
9.3 Dynamic coefficient for gust wind response
9.4 Vortex shedding, aeroelastic instability and
dynamic interference effects
9.4.1 General
9.4.2 Field of application
10 Aerodynamic coefficients
10.1 General
10.2 Buildings
10.2.1 General
10.2.2 Vertical walls of rectangular plan
buildings
10.2.3 Flat roofs
10.2.4 Duopitch roofs
10.2.5 Hipped roofs
10.2.6 Multispan roofs
10.2.7 Vaulted roofs and domes
10.2.8 Internal pressure
10.2.9 Pressure on external walls or roofs with
more than one skin
10.3 Canopy roofs
10.4 Free-standing boundary walls, fences and
signboards
10.4.1 Solid boundary walls
10.4.2 Pressure coefficients for porous fences
10.4.3 Shelter factor for walls and fences
10.4.4 Signboards
10.5 Structural elements with rectangular sections
10.6 Structural elements with sharp edged sections
10.7 Structural elements with regular polygonal
section
10.8 Circular cylinders
10.8.1 External pressure coefficients
10.8.2 Force coefficients
10.9 Spheres
10.10 Lattice structures and scaffoldings
10.11 Bridges
10.11.1 General
10.11.2 Force coefficients in x-direction
10.11.3 Force coefficients in z-direction
10.11.4 Longitudinal loads for bridges
10.12 Flags
10.13 Friction coefficients
10.14 Effective slenderness l and slenderness
reduction factor pl
Annex A (informative) Meterological information and national
wind maps
Annex B (informative) Detailed procedure for in-line response
Annex C (informative) Rules for vortex excitation and other
aeroelastic effects dynamic
characteristics
Gives information to enable ENV 1992 PT2-4:1995 to be used for the design of building structures up to a height of 200 m, their appendages and components; cantilevered structures; highway and railway bridges up to 200 m span and for cycle track footbridges up to 30 m span. These structures are to be located in the UK or to be designed for UK loading.
Committee |
CEN/TC250
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
Standards | Relationship |
NBN ENV 1991 2-4 : 2002 | Identical |
DD ENV 1991-2.4 : 1997 | Identical |
NEN NAD NVN ENV 1991-2-4 : 1999 | Identical |
I.S. ENV 1991-2-4:1995 | Identical |
DIN V ENV 1991-2-4:1996-12 | Identical |
UNE-ENV 1991-2-4:1998 | Identical |
UNI ENV 1991-2-4 : 1997 | Identical |
NEN NVN ENV 1991-2-4 : 1995 | Identical |
DD ENV 1991-2-4:1997 | Identical |
I.S. ENV 1991-4:1995 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 4: ACTIONS IN SILOS AND TANKS |
02/103027 DC : DRAFT APR 2002 | PREN 13084-8 - FREE-STANDING CHIMNEYS - PART 8: DESIGN AND EXECUTION OF MAST CONSTRUCTION WITH SATELLITE COMPONENTS |
09/30205918 DC : 0 | BS EN 1794-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS |
01/100811 DC : DRAFT JAN 2001 | BS EN 14024 - METAL PROFILES WITH THERMAL BARRIER - MECHANICAL PERFORMANCE - REQUIREMENTS, PROOF AND TESTS FOR ASSESSMENT |
BS EN 50119 : 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
98/103735 DC : DRAFT APRIL 98 | PREN 1317-6 - ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEMS, PEDESTRIAN PARAPET |
PREN 14620-1 : DRAFT 2003 | DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 1: GENERAL |
CEI EN 50125-2 : 2003 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 2: FIXED ELECTRICAL INSTALLATIONS |
I.S. ENV 1993-6:1999 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES |
I.S. ENV 1993-1-6:2000 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-6: GENERAL RULES - SUPPLEMENTARY RULES FOR THE SHELL STRUCTURES |
I.S. ENV 1993-4-3:2000 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-3: SILOS, TANKS AND PIPELINES - PIPELINES |
I.S. ENV 1991-2-5:1997 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 2-5: ACTIONS ON STRUCTURES - THERMAL ACTIONS |
BS EN ISO 19902 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
BS EN 14024:2004 | Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment |
DIN EN 13241-1:2004-04 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
DIN EN 14024:2005-01 | Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment |
EN 12152:2002 | Curtain walling - Air permeability - Performance requirements and classification |
EN 12424:2000 | Industrial, commercial and garage doors and gates - Resistance to wind load - Classification |
EN 12179:2000 | Curtain walling - Resistance to wind load - Test method |
EN 12811-1:2003 | Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design |
DIN EN 12152:2002-08 | Curtain walling - Air permeability - Performance requirements and classification |
EN 13241:2003+A2:2016 | Industrial, commercial, garage doors and gates - Product standard, performance characteristics |
I.S. EN 14024:2004 | METAL PROFILES WITH THERMAL BARRIER - MECHANICAL PERFORMANCE - REQUIREMENTS, PROOF AND TESTS FOR ASSESSMENT |
I.S. EN 12152:2002 | CURTAIN WALLING - AIR PERMEABILITY - PERFORMANCE REQUIREMENTS AND CLASSIFICATION |
09/30195277 DC : 0 | BS EN 13451-1 - SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
03/313805 DC : DRAFT AUG 2003 | EN 14067-4 - RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
99/100074 DC : DRAFT JAN 1999 | PREN 13474-1 - GLASS IN BUILDING - DESIGN OF GLASS PANES - PART 1: GENERAL BASIS OF DESIGN |
PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
BS PAS 018(1996) : 1996 | SPECIFICATION FOR CHILDREN'S PLAYGROUND EQUIPMENT |
11/30215604 DC : 0 | BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
04/30114109 DC : DRAFT MAY 2004 | EN 12976-2 - THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - TEST METHODS |
PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
PREN 13451-1 : DRAFT 2009 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
04/19985213 DC : DRAFT NOV 2004 | ISO 19902 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
DD ENV 1991-3:2000 | Eurocode 1. Basis of design and actions on structures Traffic loads on bridges (United Kingdom Application Document) |
17/30351975 DC : DRAFT AUG 2017 | BS EN 17088 - SIDE CURTAINS VENTILATION SYSTEMS - SAFETY |
01/101336 DC : DRAFT JAN 2001 | PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
ASCE 7 10 : 2011 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
EN 13031-1:2001 | Greenhouses - Design and construction - Part 1: Commercial production greenhouses |
I.S. EN 50119:2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
DIN EN 13084-8:2005-08 | FREE-STANDING INDUSTRIAL CHIMNEYS - PART 8: DESIGN AND EXECUTION OF MAST CONSTRUCTION WITH SATELLITE COMPONENTS |
BS EN 13116:2001 | Curtain walling. Resistance to wind load. Performance requirements |
BS EN 13241-1 : 2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
I.S. EN ISO 19902:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
BS 5696-1:1997 | Play equipment intended for permanent installation outdoors General safety requirements and test methods |
DD ENV 1994-2:2001 | Eurocode 4. Design of composite steel and concrete structures Composite bridges (together with United Kingdom National Application Document) |
PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
95/105293 DC : DRAFT JUL 95 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES AND DIMENSIONAL TOLERANCES |
DD ENV 12977-1:2001 | Thermal solar systems and components. Custom built systems General requirements |
97/107906 DC : DRAFT DEC 1997 | PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: ACTIONS, REQUIREMENTS AND TERMINOLOGY |
99/104932 DC : DRAFT JUN 1999 | PREN 13084-6 - FREE STANDING INDUSTRIAL CHIMNEYS - PART 6: STEEL LINERS - DESIGN AND EXECUTION |
I.S. ENV 1994-2:1998 | EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: COMPOSITE BRIDGES |
I.S. ENV 1991-2-7:1999 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 2-7: ACTIONS ON STRUCTURES - ACCIDENTAL ACTIONS DUE TO IMPACT AND EXPLOSIONS |
I.S. EN 13031-1:2002 | GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES |
BS EN 12325-2:1999 | Irrigation techniques. Centre pivot and moving lateral systems Minimum performances and technical characteristics |
UNE-EN 13241-1:2004 | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
DIN EN 13241-1:2011-06 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
UNI EN 13241-1 : 2011 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
99/107557 DC : DRAFT SEP 1999 | PREN 13693 - SPECIAL PRECAST PRESTRESSED CONCRETE ROOF ELEMENTS |
02/102266 DC : DRAFT MAR 2002 | PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
01/541305 DC : DRAFT OCT 2001 | BS EN 12101-6 - SMOKE AND HEAT CONTROL SYSTEMS - PART 6: PRESSURE DIFFERENTIAL SYSTEMS - KITS |
03/100996 DC : DRAFT MAR 2003 | PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS - SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
DD ENV 1991-2.6 : 2000 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 2-6: ACTIONS ON STRUCTURES - ACTIONS DURING EXECUTION |
00/705761 DC : DRAFT FEB 2000 | PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
I.S. EN 50125-2:2003 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 2: FIXED ELECTRICAL INSTALLATIONS |
I.S. ENV 1993-2:1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
IEC 60913:2013 | Railway applications - Fixed installations - Electric traction overhead contact lines |
DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
DIN EN 13031-1:2003-09 | GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES |
BS EN 12179:2000 | Curtain walling. Resistance to wind load. Test method |
I.S. EN 50119:2020 | Railway applications - Fixed installations - Electric traction overhead contact lines |
BS EN 13084-8:2005 | Free-standing industrial chimneys Design and execution of mast construction with satellite components |
ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
BS EN 12811-1:2003 | Temporary works equipment Scaffolds. Performance requirements and general design |
EN 50125-2:2002/corrigendum:2010 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 2: FIXED ELECTRICAL INSTALLATIONS |
BS EN 12152:2002 | Curtain walling. Air permeability. Performance requirements and classification |
EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
BS EN 13031-1:2001 | Greenhouses. Design and construction Commercial production greenhouses |
ENV 1993-2 : 1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
EN 13241-1:2003+A1:2011 | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
EN 14024:2004 | Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment |
ENV 1991-3:1995/AC:1998 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - TRAFFIC LOADS ON BRIDGES |
ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
BS EN 13241 : 2003 | INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND GATES - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS |
I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
00/103131 DC : DRAFT APR 2000 | PREN 13474-2 - GLASS IN BUILDING - DESIGN OF GLASS PANES - PART 2: DESIGN FOR UNIFORMLY DISTRIBUTED LOADS |
01/108802 DC : DRAFT DEC 2001 | BS EN 13084-7 - FREE-STANDING INDUSTRIAL CHIMNEYS - CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL CHIMNEY LINERS - PRODUCT SPECIFICATION |
05/30137717 DC : DRAFT AUG 2005 | EN 15312 - FREE ACCESS MULTI-SPORTS EQUIPMENT - REQUIREMENTS, INCLUDING SAFETY AND TEST METHODS |
04/30113768 DC : DRAFT MAY 2004 | EN 12976-1 - THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS |
DD ENV 1991-4:1996 | Basis of design and actions on structures Actions in silos and tanks |
03/105148 DC : DRAFT MAR 2003 | PREN 14620-1 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 1: GENERAL |
DD ENV 12977-2:2001 | Thermal solar systems and components. Custom built systems Test methods |
BS EN 50125-2:2002 | Railway applications. Environmental conditions for equipment Fixed electrical installations |
04/19987163 DC : DRAFT OCT 2004 | EN 13200-6 - SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS |
I.S. ENV 1993-3-2:1998 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 3-2: TOWERS, MASTS AND CHIMNEYS - CHIMNEYS |
I.S. ENV 1993-4-1:2000 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS, TANKS AND PIPELINES - SILOS |
I.S. ENV 1993-4-2:2000 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-2: SILOS, TANKS AND PIPELINES - TANKS |
BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
BS EN 12424:2000 | Industrial, commercial and garage doors and gates. Resistance to wind load. Classification |
UNI EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
EN 13116:2001 | Curtain walling - Resistance to wind load - Performance requirements |
EN 13084-8:2005 | Free-standing industrial chimneys - Part 8: Design and execution of mast construction with satellite components |
I.S. EN 13116:2001 | CURTAIN WALLING - RESISTANCE TO WIND LOAD - PERFORMANCE REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.