Skip to content
Please enter a keyword to search

  • 11/30215604 DC : 0

    Current The latest, up-to-date edition.

    BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date: 

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Scope
    2 Normative references
    3 Terms, definitions, symbols and abbreviated
      terms
    4 Fundamental design data
    5 System requirements
    6 Structures
    7 Component requirements
    8 Testing
    9 Minimum documentation
    Annex A (informative) - Current carrying capacity
            of conductors
    Annex B (informative) - Structural details
    Annex C (informative) - Information on geotechnical
            soil investigation and soil characteristics
    Annex D (informative) - Information on Uniformity
            of Elasticity of OCL within a span length
    Annex E (normative) - Special national conditions
    Bibliography

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee GEL/9
    Document Type Draft
    Publisher British Standards Institution
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    UIC 606-1 : 1987 AMD 1 CONSEQUENCES OF THE APPLICATION OF THE KINEMATIC GAUGES DEFINED BY UIC LEAFLETS IN THE 505 SERIES ON THE DESIGN OF THE CONTACT LINES
    EN 50189:2000 Conductors for overhead lines - Zinc coated steel wires
    EN 12465 : 2001 WOOD POLES FOR OVERHEAD LINES - DURABILITY REQUIREMENTS
    ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
    IEC 61325:1995 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
    ISO 22476-2:2005 Geotechnical investigation and testing Field testing Part 2: Dynamic probing
    EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
    EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
    EN 12843 : 2004 PRECAST CONCRETE PRODUCTS - MASTS AND POLES
    ISO 10721-1:1997 Steel structures — Part 1: Materials and design
    IEC 60826:2017 Design criteria of overhead transmission lines
    EN 50326 : 2002 Conductors for overhead lines - Characteristics of greases
    UIC 606-2 : 4ED 1986 INSTALLATION OF 25 KV AND 50 OR 60 HZ OVERHEAD CONTACT LINES
    IEC 62128-1:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
    IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
    EN 1991-2:2003/AC:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES
    IEC 61992-7-1:2006 Railway applications - Fixed installations - DC switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
    IEC 60305:1995 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type
    EN 50318:2002 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
    CLC/TS 50502:2008 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems
    EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
    EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
    IEC 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
    ISO 14688-1:2002 Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description
    IEC 61992-7-2:2006 Railway applications - Fixed installations - DC switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
    ISO/TR 11069:1995 Aluminium structures — Material and design — Ultimate limit state under static loading
    IEC 61992-3:2006+AMD1:2015 CSV Railway applications - Fixed installations - DC switchgear - Part 3:Indoor d.c. disconnectors, switch-disconnectors and earthing switches
    IEC 61992-5:2006 Railway applications - Fixed installations - DC switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in d.c. systems
    ISO 4354:2009 Wind actions on structures
    IEC 60494-1:2013 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles
    IEC 60383-1:1993 Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
    SAC GB/T 1179 : 1999 ROUND WIRE CONCENTRIC LAY OVERHEAD ELECTRICAL STRANDED CONDUCTORS
    UIC 608 : 3ED 2003 CONDITIONS TO BE COMPLIED WITH FOR THE PANTOGRAPHS OF TRACTIVE UNITS USED IN INTERNATIONAL SERVICES
    UIC 505-5 : 3ED 2010 HISTORY, JUSTIFICATION AND COMMENTARIES ON THE ELABORATION AND DEVELOPMENT OF UIC LEAFLETS OF THE SERIES 505 AND 506 ON GAUGES
    UIC 505-1 : 10ED 2006 RAILWAY TRANSPORT STOCK - ROLLING STOCK CONSTRUCTION GAUGE
    IEC 61109:2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
    IEC 60672-3:1997 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
    IEC 60660:1999 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
    ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
    EN 50183:2000 Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires
    EN 20898-2 : 1993 MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992)
    IEC 60850:2014 Railway applications - Supply voltages of traction systems
    EN 50317:2012/AC:2012 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - REQUIREMENTS FOR AND VALIDATION OF MEASUREMENTS OF THE DYNAMIC INTERACTION BETWEEN PANTOGRAPH AND OVERHEAD CONTACT LINE
    IEC 61952:2008 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
    ISO 22475-1:2006 Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution
    IEC 61992-4:2006+AMD1:2015 CSV Railway applications - Fixed installations - DC switchgear - Part 4:Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
    ISO 14689-1:2003 Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description
    EN 12510:2001/AC:2002 WOOD POLES FOR OVERHEAD LINES - STRENGTH GRADING CRITERIA
    IEC 62236-2:2008 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
    EN 12479 : 2001 WOOD POLES FOR OVERHEAD LINES - SIZES - METHODS OF MEASUREMENT AND PERMISSIBLE DEVIATIONS
    ISO 10721-2:1999 Steel structures — Part 2: Fabrication and erection
    IEC 60889:1987 Hard-drawn aluminium wire for overhead line conductors
    ISO 22476-3:2005 Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test
    ISO 14688-2:2004 Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC TS 61245:2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
    IEC 60273:1990 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
    IEC 60099-1:1991+AMD1:1999 CSV Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
    IEC 61992-2:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 2:DC circuit-breakers
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    EN 50345:2009 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines
    ISO 657-14:2000 Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties
    IEC 62128-2:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
    EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
    EN 1997-2:2007/AC:2010 EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
    IEC 62505-2:2016 Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV
    ENV 1991-2-4 : 1995 EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT)
    IEC 62497-2:2010 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
    IEC 60099-5:2013 Surge arresters - Part 5: Selection and application recommendations
    IEC 60652:2002 Loading tests on overhead line structures
    UIC 791 : 2ED 1990 QUALITY ASSURANCE OF OVERHEAD LINE EQUIPMENT
    IEC 60672-2:1999 Ceramic and glass insulating materials - Part 2: Methods of test
    EN 50182:2001/AC:2013 CONDUCTORS FOR OVERHEAD LINES - ROUND WIRE CONCENTRIC LAY STRANDED CONDUCTORS
    EN 12509 : 2001 TIMBER POLES FOR OVERHEAD LINES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY, BENDING STRENGTH, DENSITY AND MOISTURE CONTENT
    UIC 794 : 1ED 1996 PANTOGRAPH-OVERHEAD LINE INTERACTION ON THE EUROPEAN HIGH-SPEED NETWORK
    EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
    IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
    IEC 61992-1:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 1:General
    IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
    EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
    IEC 61232:1993 Aluminium-clad steel wires for electrical purposes
    IEC 60433:1998 Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type
    EN 50149:2012 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    IEC 62486:2017 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead contactline (to achieve free access)
    UIC 505-4 : 4ED 2007 EFFECTS OF THE APPLICATION OF THE KINEMATIC GAUGES DEFINED IN THE 505 SERIES OF LEAFLETS ON THE POSITIONING OF STRUCTURES IN RELATION TO THE TRACKS AND OF THE TRACKS IN RELATION TO EACH OTHER
    IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
    EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
    EN 1537:2013 Execution of special geotechnical works - Ground anchors
    EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
    IEC 62498-2:2010 Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
    UIC 600 : 4ED 2003 ELECTRIC TRACTION WITH AERIAL CONTACT LINE
    ISO 22966:2009 Execution of concrete structures
    EN 12511 : 2001 WOOD POLES FOR OVERHEAD LINES - DETERMINATION OF CHARACTERISTIC VALUES
    ISO 16160:2012 Hot-rolled steel sheet products — Dimensional and shape tolerances
    IEC 61992-7-3:2006 Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices
    IEC 61992-6:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 6:DC switchgear assemblies
    ISO 630-2:2011 Structural steels Part 2: Technical delivery conditions for structural steels for general purposes
    IEC 60383-2:1993 Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
    IEC 62621:2011 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
    ISO 23469:2005 Bases for design of structures Seismic actions for designing geotechnical works
    EN 12699:2015 Execution of special geotechnical works - Displacement piles
    EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
    IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches
    EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    IEC 60168:1994+AMD1:1997+AMD2:2000 CSV Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
    ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
    IEC 60672-1:1995 Ceramic and glass insulating materials - Part 1: Definitions and classification
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective