ETS 300 010-1 : 20002
Current
The latest, up-to-date edition.
TRANSMISSION AND MULTIPLEXING (TM) - SYNCHRONOUS CROSS CONNECT EQUIPMENT; 64 AND N X 64 KBIT/S CROSS CONNECTION RATE 2048 KBIT/S ACCESS PORTS; CORE FUNCTIONS AND CHARACTERISTICS
Hardcopy , PDF
English
Foreword
1 Scope
2 Normative references
3 Definitions
4 Symbols and abbreviations
5 Network reference configuration
6 Reference mode
7 General characteristics
7.1 Size
7.2 Timing signal
8 Functions
8.1 Cross connection
8.2 Management
9 Interfaces
9.1 2048 kbit/s interface
9.2 Synchronization interface at 2048 kHz
9.3 Interface with the TMN
9.4 User interface
9.5 Power supply interface
10 Frame alignment and CRC procedure
10.1 Loss of frame alignment
10.2 Recovery of frame alignment
10.3 CRC multiframe alignment in TS 0
10.4 CRC bit monitoring 16
11 Defect or failure conditions and performance
monitoring
11.1 Defect or failure conditions at the G2
(or A2) reference point and consequent actions
at the J2 (or G2) and G1 (or A1) reference
points
11.2 Defect or failure conditions and consequent
actions for the core of the equipment
11.3 Performance monitoring
12 Performance
12.1 Blocking factor
12.2 Jitter
12.3 Transfer delay
12.4 Slips
12.5 Error characteristics of the equipment
Annex A (normative): Additional requirements for cross
connection of channel associated
signalling bits in TS
A.1 Network reference configuration (clause 5)
A.2 Cross connection (subclause 8.1)
A.3 Frame structure (subclause 9.1.2)
A.4 Defect or failure conditions and performance
monitoring (clause 11)
A.4.1 Defect or failure conditions
(subclause 11.1.1)
A.4.2 Consequent actions (subclause 11.1.2)
A.4.3 Defect or failure conditions and consequent
actions for the core of the equipment
(subclause 11.2)
A.5 Transfer delay (subclause 12.3)
A.5.1 64 and n x 64 kbit/s signals
A.5.2 Channel associated signalling in TS 16
Annex B (normative): Additional TS allocation
B.1 Cross connection (subclause 8.1)
B.2 Frame structure (subclause 9.1.2)
Annex C (normative): Other timing and slip performance
requirements
C.1 More stringent performance
C.2 Less stringent performance
Annex D (normative): Additional requirements for cross
connection
D.1 Additional requirements for cross connection of
unstructured signal 2 048 kbit/s signal
D.2 Additional requirements for cross connection of
CCITT Recommendation G.704 framed 2 048 kbit/s sign
D.3 Additional requirements for TS 0 cross connection
Annex E (informative): Bibliography
History
Describes requirements of cross connect equipment to be used in synchronous digital leased line networks. Covers equipment having 2048 kbit/s access ports and is limited to the basic performance, functions and external characteristics of the equipment.
Committee |
TM 1
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
European Telecommunications Standards Institute
|
Status |
Current
|
Standards | Relationship |
PN ETS 300 010-1 : 1999 | Identical |
NBN ETS 300 010 1 : 1995 | Identical |
NF ETS 300 010-1 : 1995 | Identical |
DIN ETS 300010-1:1995-12 | Identical |
ETR 136 : 20001 | TRANSMISSION AND MULTIPLEXING (TM); FUNCTIONAL CHARACTERISTICS OF 64 KBIT/S FRAME STRUCTURE |
TR 101 689-1 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM) - TERMS AND DEFINITIONS IN TRANSPORT NETWORKS - PART 1: CORE NETWORKS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.