I.S. EN 10300:2005
Current
The latest, up-to-date edition.
Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating
Hardcopy , PDF
English
01-01-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Composition of the coating
5 Method of application
6 Inspection and testing
7 Repairs
8 Marking
9 Handling, transport and storage
Annex A (normative) Preparation of steel surfaces
for the tests given in Annexes
D, E, F and G
Annex B (normative) Priming of steel surfaces for the
tests given in Annexes D, E, F
and G
Annex C (normative) Application of coating material for
the tests given in Annexes D, E,
F and G
Annex D (normative) Sag test
Annex E (normative) Impact test
Annex F (normative) Peel test
Annex G (normative) Bend test
Annex H (normative) Determination of volatile matter
- Percent loss of mass
Annex I (normative) Cathodic disbonding test
Annex J (informative) Guidelines for the use of
coating materials
Annex K (normative) Determination of filler content
by ignition
Annex L (normative) Determination of density at 25
degree C
Annex M (normative) Determination of mass per area
and loss of mass on ignition
Annex N (normative) Glass fabric - Tensile strength
Annex O (normative) Determination of porosity
Annex P (normative) Use of hot applied bitumen tapes
for coating steel components
Annex Q (informative) Recommended minimum quality
control requirements for bituminous
enamel pipeline coatings
Annex R (normative) Holiday detection test
Annex S (normative) Field bond test
Annex T (normative) Inspection of coating thickness
Annex U (informative) Information to be supplied at
the time of ordering
Bibliography
Defines requirements for the application of factory applied external bitumen based hot applied coatings for the corrosion protection of steel tubes and fittings for onshore and offshore pipelines.
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 10300 : 2005 | Identical |
| NBN EN 10300 : 2006 | Identical |
| SN EN 10300 : 2005 | Identical |
| NS EN 10300 : 1ED 2006 | Identical |
| EN 10300:2005 | Identical |
| BS EN 10300:2005 | Identical |
| NF EN 10300 : 2005 | Identical |
| UNE-EN 10300:2008 | Identical |
| UNI EN 10300 : 2007 | Identical |
| DIN EN 10300:2006-02 | Identical |
| I.S. 3216:2010 | CODE OF PRACTICE - BULK STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) - (EDITION 2) |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| ISO 2591-1:1988 | Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate |
| EN 12311-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
| EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| EN 1849-1:1999 | Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| ISO 719:1985 | Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
| ASTM D 737 : 2004 | Test Method for Air Permeability of Textile Fabrics |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.