I.S. EN 12094-8:2006
Current
The latest, up-to-date edition.
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
Hardcopy , PDF
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General design
4.2 Connection threads
4.3 Resistance to leakage
4.4 Resistance to bursting
4.5 Resistance of type 2 and type 4 connectors to
pressure and heat
4.6 Resistance of type 2 and type 4 connectors to
heat and cold shock
4.7 Resistance of flexible connectors to cold
4.8 Resistance of type 2 connectors to flexing
4.9 Documentation
5 Type test methods
5.1 Conditions
5.2 Samples
5.3 Compliance
5.4 Test for resistance to leakage
5.5 Test for resistance to bursting
5.6 Test for resistance of type 2 and type 4 connectors
to pressure and heat
5.7 Test for resistance of type 2 and type 4 connectors
to heat and cold shock
5.8 Test for resistance of flexible connectors to cold
5.9 Test for resistance of type 2 connectors to flexing
6 Marking
7 Evaluation of conformity
7.1 General
7.2 Initial type testing
7.3 Factory production control (FPC)
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the Construction
Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for the attestation of conformity of
connectors
ZA.3 CE Marking and labelling
Bibliography
States requirements and describes test methods for flexible and rigid connectors used in CO[2]-, Inert Gas- or Halocarbon gas fire extinguishing systems.
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 12094-8:2016-06 (Draft) | Identical |
| UNI EN 12094-8 : 2006 | Identical |
| EN 12094-8:2006 | Identical |
| BS EN 12094-8:2006 | Identical |
| NBN EN 12094-8 : 2006 | Identical |
| UNE-EN 12094-8:2007 | Identical |
| SN EN 12094-8 : 2006 | Identical |
| NEN EN 12094-8 : 2006 | Identical |
| NF EN 12094-8 : 2006 | Identical |
| NS EN 12094-8 : 2ED 2006 | Identical |
| DIN EN 12094-8:2006-07 | Identical |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| 1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
| EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
| 1990/384/EEC : 1990 | COUNCIL DIRECTIVE OF 20 JUNE 1990 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO NON-AUTOMATIC WEIGHING INSTRUMENTS |
| 1988/378/EEC : 1988 | COUNCIL DIRECTIVE OF 3 MAY 1988 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING THE SAFETY OF TOYS |
| EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
| 1973/23/EEC : 1973 | COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| 92/42/EEC : 1992 AMD 5 2013 | COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS |
| ISO/IEC Guide 65:1996 | General requirements for bodies operating product certification systems |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| 1987/404/EEC : 1987 | COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS |
| 1990/396/EEC : 1990 | COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.