I.S. EN 12312-6:2017
Current
The latest, up-to-date edition.
AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Information for use
7 Verification of requirements
Annex A (normative) - List of hazards
Annex B (informative) - Fluid system
Annex C (informative) - Toxicological aspects
of using de-icing/anti-icing equipment
Annex D (informative) - Environmental aspects
of de-icing/anti-icing at airports
Annex E (informative) - Loading control
Annex ZA (informative) - Relationship between this
European Standard and the essential
requirements of EU Directive 2006/42/EC
aimed to be covered
Bibliography
Defines the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of deicers and equipment designed exclusively for de-icing and washing of aircraft with de-icing/anti-icing/washing liquids when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative.
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 12312-6 : 2017 | Identical |
| NS EN 12312-6 : 2017 | Identical |
| EN 12312-6:2017 | Identical |
| NBN EN 12312-6 : 2004 + A1 2009 | Identical |
| BS EN 12312-6:2017 | Identical |
| DIN EN 12312-6:2014-07 (Draft) | Identical |
| DIN EN 12312-6:2017-07 | Equivalent |
| EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
| SAE ARP1971C | Aircraft Deicing Vehicle – Self-Propelled |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| EN 280:2013+A1:2015 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| EN 1915-3:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
| SAE AMS1428J | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| EN 13034:2005+A1:2009 | Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
| ISO 6966-2:2014 | Aircraft ground equipment — Basic requirements — Part 2: Safety requirements |
| ISO 11077:2014 | Aircraft ground equipment — De-icers — Functional requirements |
| EN ISO 17491-3:2008 | Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
| EN 149:2001+A1:2009 | Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 11076:2012 | Aircraft — De-icing/anti-icing methods on the ground |
| EN 1915-4:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| SAE ARP5058B | Enclosed Operator’s Cabin for Aircraft Ground Deicing Equipment |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| DIN 51130:2014-02 | Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 4305:2014 | Mobile cranes — Determination of stability |
| ISO 11078:2007 | Aircraft — De-icing/anti-icing fluids — ISO types II, III and IV |
| EN 1915-2:2001+A1:2009 | Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| ISO 17491-3:2008 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) |
| ISO 11075:2007 | Aircraft — De-icing/anti-icing fluids — ISO type I |
| EN 795:2012 | Personal fall protection equipment - Anchor devices |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| ICAO 9640 : 2000 | MANUAL OF AIRCRAFT GROUND DE-ICING/ANTI-ICING OPERATIONS |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.