• There are no items in your cart

EN 795:2012

Current

Current

The latest, up-to-date edition.

Personal fall protection equipment - Anchor devices

Published date

25-07-2012

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Marking
7 Information supplied by the manufacturer
Annex A (informative) - Information on installation
        documentation and periodic examination
Annex B (informative) - Significant technical changes
        between this European Standard and the previous
        edition EN 795:1996 and EN 795:1996/A1:2001
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of
         EU Directive 89/686/EEC
Bibliography

This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of components of a personal fall protection system in accordance with EN 363.This European Standard also gives requirements for marking and instructions for use, and guidance on installation. This European Standard is not applicable to:-anchor devices intended to allow more than one user to be attached at any one time;-anchor devices used in any sports or recreational activity;-equipment designed to conform to EN 516 or EN 517;-elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;-structural anchors (see 3.3).

Committee
CEN/TC 160
DevelopmentNote
Supersedes PREN 795. (08/2012)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
BS EN 795:2012 Identical
NS EN 795 : 2012 Identical
UNE-EN 795:1997 Identical
DIN EN 795:2012-10 Identical
NBN EN 795 : 2012 Identical
NF EN 795 : 2016 Identical
I.S. EN 795:2012 Identical
SN EN 795:2012 Identical
UNE-EN 795:2012 Identical
PN EN 795 : 2012 Identical
UNI EN 795 : 2012 Identical
NEN EN 795 : 2012 Identical
PNE-EN 795 Identical

18/30366946 DC : 0 BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
S.R. CEN/TS 16415:2013 PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES - RECOMMENDATIONS FOR ANCHOR DEVICES FOR USE BY MORE THAN ONE PERSON SIMULTANEOUSLY
02/710681 DC : DRAFT SEP 2002 BS EN 14502-1 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS
UNE-EN 16851:2017 Cranes - Light crane systems
14/30299187 DC : 0 BS EN 12312-6 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
08/30184292 DC : DRAFT SEP 2008 BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
CEN/TS 16415:2013 Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously
10/30234333 DC : DRAFT DEC 2010 BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
08/30176477 DC : DRAFT APR 2008 BS EN 14502-1 - CRANES - EQUIPMENT FOR LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS
04/30126149 DC : 0 EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY
PREN 1909 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION
DIN EN 12561-7:2011-10 Railway applications - Tank wagons - Part 7: Platforms and ladders
BS EN ISO 14122-4:2016 Safety of machinery. Permanent means of access to machinery Fixed ladders
BS EN 517:2006 Prefabricated accessories for roofing. Roof safety hooks
BS EN 1873 : 2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
UNE-EN ISO 14122-4:2017 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
BS EN 528:2008 Rail dependent storage and retrieval equipment. Safety requirements
EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements
EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
EN 16228-1:2014 Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
DIN EN 1496:2017-03 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
EN 12561-7:2011 Railway applications - Tank wagons - Part 7: Platforms and ladders
I.S. EN 363:2008 PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS
CEI EN 50308 : 2005 WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
PREN 1496 : DRAFT 2015 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
UNI EN 16228-1 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
DD ISO/TS 3691-7:2011 Industrial trucks. Safety requirements and verification Regional requirements for countries within the European Community
I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
BS EN 16851:2017 Cranes. Light crane systems
PREN 16307-3 : DRAFT 2017 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: SUPPLEMENTARY REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS (ADDITIONAL REQUIREMENTS TO EN 16307-1)
UNE-EN 1993-3-1:2013 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
PREN 17206 : DRAFT 2018 ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
DIN EN 363:2016-05 (Draft) PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS
S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
DIN EN 13107:2015-09 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
DIN EN 536:2016-01 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
UNE-EN 1496:2018 Personal fall protection equipment - Rescue lifting devices
DIN EN 14502-1:2010-11 Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets
DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
BS EN 12561-7:2011 Railway applications. Tank wagons Platforms and ladders
BS EN 12312-6:2017 Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment
UNE-EN ISO 14122-2:2017 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
I.S. EN 619:2002
I.S. EN 13796-1:2017 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
I.S. EN 1909:2017 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION
EN 16851:2017 Cranes - Light crane systems
I.S. EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
I.S. EN ISO 14122-4:2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS (ISO 14122-4:2016)
I.S. EN 12312-6:2017 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT
DIN EN 13796-1:2006-01 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
I.S. EN ISO 14122-2:2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS (ISO 14122-2:2016)
I.S. EN 517:2006 PREFABRICATED ACCESSORIES FOR ROOFING - ROOF SAFETY HOOKS
I.S. EN 1873:2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 617:2001
EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes
I.S. EN 13107:2015 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
I.S. EN 12561-7:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
I.S. EN 516:2006 PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS
I.S. EN 1496:2017 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
DIN EN 1873:2016-07 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN ISO 14122-3:2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS (ISO 14122-3:2016)
I.S. EN ISO 14122-1:2016 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS (ISO 14122-1:2016)
I.S. EN 536:2015 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
I.S. EN 14502-1:2010 CRANES - EQUIPMENT FOR LIFTING PERSONS - PART 1: SUSPENDED BASKETS
I.S. EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
NF EN 619 : 2003 + A1 2010
VDI 3564 Blatt 1:2017-05 Fire protection - Recommendations for high-bay warehouses
DIN EN 1993-3-1:2010-12 Eurocode 3: Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts (includes Corrigendum AC:2009)
17/30364335 DC : 0 BS EN 1009-3 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR CRUSHING AND MILLING MACHINERY
PREN 360 : DRAFT 2016 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS
BS EN 50308:2004 Wind turbines. Protective measures. Requirements for design, operation and maintenance
I.S. EN ISO 11111-2:2005 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES
13/30277460 DC : 0 BS EN 1909 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION
PREN 363 : DRAFT 2016 PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS
96/104565 DC : JUN 96 EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS
12/30260955 DC : 0 BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
I.S. EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
ANSI Z245.1 : 2017 MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT
DIN EN 16228-1:2014-10 Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014
I.S. EN 50308:2005 WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
UNI EN 363 : 2008 PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS
UNE-EN 14502-1:2010 Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets
DIN EN 1496:2015-07 (Draft) PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
DIN EN 1808:2015-08 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
DIN EN 1909:2013-04 (Draft) SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION
BS EN 14502-1:2010 Cranes. Equipment for the lifting of persons Suspended baskets
BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements
EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
UNI EN 619 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
UNI EN 617 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
UNI EN 14502-1 : 2010 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS
UNI EN 12561-7 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
13/30291705 DC : 0 BS EN ISO 14122-3 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS
UNE-EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
PREN 474-10 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
15/30296047 DC : 0 BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS
13/30291003 DC : 0 BS EN ISO 14122-2 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS
05/30134192 DC : DRAFT MAY 2005 EN 516 - PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS
BS EN 16228-1:2014 Drilling and foundation equipment. Safety Common requirements
14/30290999 DC : 0 BS EN ISO 14122-1 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS OF ACCESS BETWEEN TWO LEVELS
BS EN 1993-3-1:2006 Eurocode 3. Design of steel structures Towers, masts and chimneys
11/30236557 DC : 0 BS EN 16228-2 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
97/105385 DC : DRAFT JULY 1997 PREN 12951 - PREFABRICATED ACCESSORIES FOR ROOFING - PERMANENTLY FIXED ROOF LADDERS
UNI CEN/TS 16415 : 2013 PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES - RECOMMENDATIONS FOR ANCHOR DEVICES FOR USE BY MORE THAN ONE PERSON SIMULTANEOUSLY
UNI EN 1993-3-1 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS
DIN EN 16851:2015-05 (Draft) CRANES - LIGHT CRANE SYSTEMS
I.S. EN 16228-1:2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 363:2008 Personal fall protection equipment. Personal fall protection systems
17/30354229 DC : 0 BS EN 17109 - ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS
17/30364338 DC : 0 BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS
PREN 17109 : DRAFT 2017 ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS
ISO/TS 3691-7:2011 Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community
EN 363:2008 Personal fall protection equipment - Personal fall protection systems
I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
DIN EN 528:2009-02 Rail dependent storage and retrieval equipment - Safety requirements
DIN EN 617:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010)
BS EN 1496:2017 Personal fall protection equipment. Rescue lifting devices
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
ISO 11111-2:2005 Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines
UNE-EN ISO 14122-1:2017 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
BS EN ISO 14122-3:2016 Safety of machinery. Permanent means of access to machinery Stairs, stepladders and guard-rails
BS EN 13107:2015 Safety requirements for cableway installations designed to carry persons. Civil engineering works
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
BS EN 619 : 2002
UNE-EN 16228-1:2015 Drilling and foundation equipment - Safety - Part 1: Common requirements
UNE-EN 13796-1:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
UNE-EN 1909:2017 Safety requirements for cableway installations designed to carry persons - Recovery and evacuation
BS EN 1909:2017 Safety requirements for cableway installations designed to carry persons. Recovery and evacuation
BS EN 13796-1:2005 Safety requirements for cableway installations designed to carry persons. Carriers Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
UNE 180201:2016 Formwork. General Design, performance requirements and verifications
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
UNE-EN 619:2003 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
UNE-EN 617:2002 Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
BS EN 1808:2015 Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests
BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
UNE-EN 1873:2015 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
BS EN 536:2015 Road construction machines. Mixing plants for road construction materials. Safety requirements
BS EN 516:2006 Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
UNE-EN 12561-7:2012 Railway applications - Tank wagons - Part 7: Platforms and ladders
UNE-EN ISO 14122-3:2017 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
DIN EN 13796-1:2012-06 (Draft) SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
EN 536:2015 Road construction machines - Mixing plants for road construction materials - Safety requirements
EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 14502-1:2010 Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets
EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
EN 1873:2014+A1:2016 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
EN 516:2006 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
EN 1909:2017 Safety requirements for cableway installations designed to carry persons - Recovery and evacuation
EN 517:2006 Prefabricated accessories for roofing - Roof safety hooks
EN 13796-1:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
EN 1496:2017 Personal fall protection equipment - Rescue lifting devices
UNI EN 528 : 2009 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
DIN EN 16851 E : 2017 CRANES - LIGHT CRANE SYSTEMS
PREN 13796-1 : DRAFT 2012 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS
PD CEN/TS 16415:2013 Personal fall protection equipment. Anchor devices. Recommendations for anchor devices for use by more than one person simultaneously
15/30323348 DC : 0 BS EN 1496 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
03/103083 DC : DRAFT FEB 2003 EN 1496 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES
16/30339214 DC : 0 BS EN 363 - PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS
16/30332882 DC : 0 BS EN 360 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS
DIN EN 619:2011-02 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010)
I.S. EN 1993-3-1:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS (INCLUDING IRISH NATIONAL ANNEX)
UNE-EN 1808:2016 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
BS EN ISO 14122-2:2016 Safety of machinery. Permanent means of access to machinery Working platforms and walkways
BS EN ISO 14122-1:2016 Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access
BS EN ISO 11111-2 : 2005 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES (ISO 11111-2:2005)
BS EN 617 : 2001
DIN EN 516:2006-04 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
EN 50308 : 2004 COR 2005 WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
DIN EN 16851:2017-06 Cranes - Light crane systems
DIN EN 517:2006-05 Prefabricated accessories for roofing - Roof safety hooks
DIN EN 12151:2008-05 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
UNI EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
UNE-EN 15011:2011 Cranes - Bridge and gantry cranes

EN 1496:2017 Personal fall protection equipment - Rescue lifting devices
EN 517:2006 Prefabricated accessories for roofing - Roof safety hooks
EN 360:2002 Personal protective equipment against falls from a height - Retractable type fall arresters
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN 892:2012+A1:2016 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
ISO 2232:1990 Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications
EN 363:2008 Personal fall protection equipment - Personal fall protection systems
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
EN 516:2006 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
EN 362:2004 Personal protective equipment against falls from a height - Connectors

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.