I.S. EN 12602:2016
Current
The latest, up-to-date edition.
PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Properties and requirements of materials
5 Properties and requirements of components
6 Evaluation of conformity
7 Basis for design
8 Marking, labelling and designation
Annex A (normative) - Design by calculation
Annex B (normative) - Design by testing
Annex C (normative) - Resistance to fire design of AAC
components and structures
Annex CA (normative) - Modulus of elasticity and maximum
strain of AAC and reinforcing steel at elevated
temperature
Annex CB (informative) - Joints between AAC components
satisfying resistance to fire E
Annex CC (normative) - Temperature profiles of AAC wall,
floor and roof components and AAC beams
Annex CD (normative) - Resistance to fire tabulated data for
walls with mechanical impact
Annex D (informative) - Recommended values for partial
safety factors
Annex E (informative) - Recommendations for the consideration
of prestress in the design of prefabricated reinforced
AAC components
Annex F (informative) - Statistical methods for quality control
Annex G (normative) - Factory production control of stainless
reinforcing steel based on at least three samples -
Minimum acceptance criteria for individual values and
corresponding mean values
Annex H (informative) - Methods for declaring the
mechanical and fire resistance performances
in ENs for structural elements
Annex ZA (informative) Relationship of this
European Standard with Regulation (EU)
No.305/2011
Bibliography
Pertains to prefabricated reinforced components of autoclaved aerated concrete to be used in building construction for: a) Structural elements: - loadbearing wall components; - retaining wall components; - roof components; - floor components; - linear components (beams and piers); b) Non-structural elements: - nonloadbearing wall components (partition walls); - cladding components (without fixtures) intended to be used for external facades of buildings; - small box culverts used to form channels for the enclosure of services; - components for noise barriers.
| DocumentType |
Standard
|
| Pages |
186
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 12602:2016 | Identical |
| EN ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010) |
| EN 12269-1:2000 | Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| ISO 12491:1997 | Statistical methods for quality control of building materials and components |
| EN 15361:2007 | Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| EN 680:2005 | Determination of the drying shrinkage of autoclaved aerated concrete |
| EN 15304:2010 | Determination of the freeze-thaw resistance of autoclaved aerated concrete |
| EN 1739:2007 | Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1740:1998 | Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) |
| EN 678:1993 | Determination of the dry density of autoclaved aerated concrete |
| EN ISO 10140-4:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010) |
| ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 14388:2015 | Road traffic noise reducing devices - Specifications |
| EN 679:2005 | Determination of the compressive strength of autoclaved aerated concrete |
| ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 1353:1996 | Determination of moisture content of autoclaved aerated concrete |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 1742:1998 | Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 991:1995 | Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1355:1996 | Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 1352:1996 | Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| ISO 4356:1977 | Bases for the design of structures Deformations of buildings at the serviceability limit states |
| EN 1356:1996 | Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load |
| EN 990:2002 | Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire |
| EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| EN 1351:1997 | Determination of flexural strength of autoclaved aerated concrete |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| EN 12269-2:2010 | Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test |
| EN 1741:1998 | Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| EN 1363-2:1999 | Fire resistance tests - Part 2: Alternative and additional procedures |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| EN 1737:1998 | Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1738:1998 | Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete |
| EN 989:1995 | Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the "Push-Out" test |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| EN 1793-2:2012 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.