I.S. EN 14198:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
Hardcopy , PDF
01-02-2020
12-12-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
European foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements
6 Performances
Annex A (normative) Vehicle requirements
Annex B (informative) Train related brake performance categories
Annex C (informative) Explanation of “proven design” concept
Annex D (informative) Corresponding standards EN – UIC
Annex E (normative) Brake pipe pressure control system
Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC
Bibliography
This European Standard specifies basic requirements for the braking of trains hauled by locomotives: — For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system.
Committee |
CEN/TC 256
|
DocumentType |
Standard
|
Pages |
168
|
ProductNote |
NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. THIS STANDARD ALSO REFERS TO EN 837-1:1996,EN 14478,EN 15663,EN 14033-1,GM/RT2045,UIC 543,
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN 14198 : 2017 | Identical |
NS EN 14198 : 2004 | Identical |
NBN EN 14198 : 2005 | Identical |
SN EN 14198:2017 | Identical |
DIN EN 14198:2015-01 (Draft) | Identical |
EN 14198:2016 | Identical |
UNI EN 14198 : 2005 | Identical |
UNE-EN 14198:2005 | Identical |
BS EN 14198 : 2016 | Identical |
ONORM EN 14198 : 2017 | Identical |
NEN EN 14198 : 2016 | Identical |
DIN EN 14198:2017-03 | Identical |
EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
EN 15595:2009+A1:2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
EN 15611:2008+A1:2010 | Railway applications - Braking - Relay valves |
EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
EN 15612:2008+A1:2010 | Railway applications - Braking - Brake pipe accelerator valve |
EN 15624:2008+A1:2010 | Railway applications - Braking - Empty-loaded changeover devices |
EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
UIC 541-5 : 4ED 2005 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO) |
NFF 11 100 : 1995 | RAILWAY ROLLING STOCK - QUALITY OF COMPRESSED AIR FOR PNEUMATIC APPARATUSES AND CIRCUITS USE |
EN 16185-2:2014 | Railway applications - Braking systems of multiple unit trains - Part 2: Test methods |
EN 15877-1:2012 | Railway applications - Marking on railway vehicles - Part 1: Freight wagons |
EN 15734-1:2010/AC:2013 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
EN 14535-2:2011 | Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
EN 15877-2:2013 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
EN 15220:2016 (edition 2) | Railway applications - Brake indicators |
UIC 541-4 : 4ED 2010 | BRAKES - BRAKES WITH COMPOSITION BRAKE BLOCKS - GENERAL CONDITIONS FOR CERTIFICATION OF COMPOSITE BRAKE BLOCKS |
EN 14535-1:2005+A1:2011 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS |
UIC 547 : 4ED 1989 | BRAKES - AIR BRAKE - STANDARD PROGRAMME OF TESTS |
UIC 541-3 : 8ED 2017 | BRAKES - DISC BRAKES AND THEIR APPLICATION - GENERAL CONDITIONS FOR THE APPROVAL OF BRAKE PADS |
EN 15329:2015 | Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles |
EN 15273-2:2013+A1:2016 | Railway applications - Gauges - Part 2: Rolling stock gauge |
EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
EN 50553 : 2012 AMD 1 2016 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
UIC 541-07 : 1ED 1992 | BRAKES - REGULATIONS GOVERNING THE CONSTRUCTION OF DIFFERENT TYPES OF BRAKING GEAR - SIMPLE PRESSURE RECEPTACLES OF STEEL, NOT FIRED, FOR AIR BRAKING EQUIPMENT AND AUXILIARY PNEUMATIC EQUIPMENT FOR RAILWAY ROLLING STOCK |
ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
EN 15807:2011 | Railway applications - Pneumatic half couplings |
EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
PREN 16834 : DRAFT 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PERFORMANCE |
EN 16451:2015 | Railway applications - Braking - Brake pad holder |
EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
EN 14531-2:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles |
EN 16452:2015 | Railway applications - Braking - Brake blocks |
EN 14601:2005+A1:2010 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
UIC 541-6 : 1ED 2010 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) AND PASSENGER ALARM SIGNAL (PAS) FOR VEHICLES USED IN HAULED CONSISTS |
UIC 541-03 : 2ED 2015 | BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER |
UIC 545 : 10ED 2014 | BRAKES - INSCRIPTIONS, MARKS AND SIGNS |
UIC 541-04 : 4ED 2014 | BRAKES - REGULATIONS CONCERNING THE MANUFACTURE OF BRAKE COMPONENTS - SELF-ADJUSTING LOAD-PROPORTIONAL BRAKING SYSTEM AND AUTOMATIC 'EMPTY-LOADED' CONTROL DEVICE |
UIC 540 : 6ED 2014 | BRAKES - AIR BRAKES FOR FREIGHT TRAINS AND PASSENGER TRAINS |
EN 14535-3:2015 | Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification |
EN 16334:2014 | Railway applications - Passenger Alarm System - System requirements |
EN 15734-2:2010/AC:2012 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS |
EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
UIC 542 : 7ED 2015 | BRAKE PARTS - INTERCHANGEABILITY |
CEN/TR 16251:2016 | Railway applications - Environmental conditions - Design guidance for rolling stock |
EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
UIC 541-06 : 2ED 2013 | BRAKES - REGULATIONS CONCERNING THE CONSTRUCTION OF THE VARIOUS BRAKE COMPONENTS: MAGNETIC BRAKES |
EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
EN 15663:2017 | Railway applications - Vehicle reference masses |
EN 15625:2008+A1:2010 | Railway applications - Braking - Automatic variable load sensing devices |
PREN 16186-2 : DRAFT 2015 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
EN 16241:2014+A1:2016 | Railway applications - Slack adjuster |
EN 837-1:1996/AC:1998 | PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
UIC 535-3 : 1976 REPRINT 1995 | EQUIPPING OF WAGONS WITH DEVICES FOR PASSING FROM ONE TO THE OTHER AND WITH SCREW BRAKES |
EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
UIC 541-1 : 8ED 2013 | BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS |
UIC 541-05 : 3ED 2016 | BRAKES - MANUFACTURING SPECIFICATIONS FOR VARIOUS BRAKE PARTS - WHEEL SLIDE PROTECTION DEVICE (WSP) |
EN 15355:2008+A1:2010 | Railway applications - Braking - Distributor valves and distributor-isolating devices |
EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
UIC 544-1 : 6ED 2014 | BRAKES - BRAKING PERFORMANCE |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.