I.S. EN 14354:2017
Current
The latest, up-to-date edition.
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Classification requirements
6 Marking and packaging
7 Test report
Annex A (normative) - Determination of thickness, length,
width, squareness, deviation from edge straightness
and cup
Annex B (normative) - Determination of opening and
lipping between elements
Annex C (normative) - Determination of the elasticity
of lacquer
Annex D (normative) - Determination of the wear
resistance using the falling sand method
Annex E (normative) - Determination of abrasion
resistance using the sand paper method
Annex F (normative) - Determination of the adhesion
of the lacquer - Cross cut test
Annex G (normative) - Complementary properties
Annex H (informative) - Guide for evaluation of
conformity of product quality
Bibliography
Specifies terms and defines requirements and test methods for wood veneer floor coverings with multilayer built up for internal use. Also provides guidance for the evaluation of conformity of the products to the requirements of this standard.
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 14354 : 2017 | Identical |
| EN 14354:2017 | Identical |
| UNI EN 14354 : 2005 | Identical |
| UNE-EN 14354:2007 | Identical |
| NF EN 14354 : 2017 | Identical |
| NBN EN 14354 : 2005 COR 2006 | Identical |
| NEN EN 14354 : 2017 | Identical |
| DIN EN 14354:2005-03 | Identical |
| BS EN 14354:2017 | Identical |
| DIN EN 14354:2017-11 | Identical |
| UNE-EN 14354:2017 | Identical |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| EN ISO 10874:2012 | Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 60454-2:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| ISO 24338:2014 | Laminate floor coverings Determination of abrasion resistance |
| ISO 24334:2014 | Laminate floor coverings Determination of locking strength for mechanically assembled panels |
| EN 13442:2013 | Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
| ISO 24339:2006 | Laminate and textile floor coverings Determination of dimensional variations after exposure to humid and dry climate conditions |
| EN 13489:2017 | Wood-flooring and parquet - Multi-layer parquet elements |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 1534:2010 | Wood flooring - Determination of resistance to indentation - Test method |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| EN 16094:2012 | Laminate floor coverings - Test method for the determination of micro-scratch resistance |
| ISO 10874:2009 | Resilient, textile and laminate floor coverings Classification |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.