EN 12732:2013+A1:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements
|
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
EN 1759-3:2003/AC:2004
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
|
ISO 9606-4:1999
|
Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
|
ISO/IEC 17050-1:2004
|
Conformity assessment Supplier's declaration of conformity Part 1: General requirements
|
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
|
EN 10226-2:2005
|
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
|
EN 60534-1:2005
|
Industrial-process control valves - Part 1: Control valve terminology and general considerations
|
EN ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
|
ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
|
EN 13906-1:2013
|
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs
|
EN 1349:2009
|
Industrial process control valves
|
EN ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
|
ISO 15610:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
|
EN 1759-1:2004
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
|
IEC 60534-3-1:2000
|
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
|
EN 1759-4:2003
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
|
EN 45011:1998
|
General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)
|
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
|
EN 1092-3:2003/AC:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
|
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013)
|
EN 12516-1:2014
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
|
EN ISO 9606-4:1999
|
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
|
EN 12516-4:2014
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
|
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size)
|
EN 45011 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
|
EN 473:2008
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles
|
EN 10045-1 : 1990
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
|
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
|
EN ISO 6708:1995
|
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
|
EN ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
|
EN 13906-2:2013
|
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs
|
EN 13445-4 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
|
ASME B1.20.1 : 2013(R2018)
|
PIPE THREADS, GENERAL PURPOSE (INCH)
|
ISO 1431-1:2012
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
|
EN 12279:2000/A1:2005
|
GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS
|
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
|
EN 1092-4:2002
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
|
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
|
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
|
EN 437:2003+A1:2009
|
Test gases - Test pressures - Appliance categories
|
ISO 5752:1982
|
Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
ISO 148:1983
|
Steel — Charpy impact test (V-notch)
|
EN ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
|
EN ISO 9606-2:2004
|
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
|
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
|
IEC 60534-3-2:2001
|
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
|
EN 334:2005+A1:2009
|
Gas pressure regulators for inlet pressures up to 100 bar
|
EN 60534-3-2:2001
|
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
|
ISO 1518:1992
|
Paints and varnishes Scratch test
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN 45020:2006
|
Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004)
|
ISO 9001:2015
|
Quality management systems — Requirements
|
EN ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
|
ASME B16.34 : 2017
|
VALVES - FLANGED, THREADED, AND WELDING END
|
EN 60534-3-1:2000/corrigendum:2000
|
INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES
|
MSS SP 55 : 2011
|
QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES
|
ISO/IEC Guide 2:2004
|
Standardization and related activities General vocabulary
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
ISO/IEC Guide 65:1996
|
General requirements for bodies operating product certification systems
|
EN ISO/IEC 17050-1:2010
|
Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15)
|
EN ISO 1518:2000
|
Paints and varnishes - Scratch test (ISO 1518:1992)
|
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
|
EN 45020 : 2006
|
STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY
|
EN 12516-2:2014
|
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test
|
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
|
EN ISO 15610:2003
|
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
|
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules
|
EN 1418:1997
|
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
|
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
|
EN 970:1997
|
Non-destructive examination of fusion welds - Visual examination
|
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
|
IEC 60534-1:2005
|
Industrial-process control valves - Part 1: Control valve terminology and general considerations
|
EN ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
|
EN ISO 9606-3:1999
|
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
|
IEC 60534-3:1976
|
Industrial-process control valves. Part 3: Dimensions - Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves
|
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
|
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids
|
ISO 9606-3:1999
|
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels
|
EN 12186:2014
|
Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
|