I.S. EN 14449:2005
Current
The latest, up-to-date edition.
GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
Hardcopy , PDF
English
01-01-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Product description
4.2 Conformity with the definition of laminated glass
and laminated safety glass
4.3 Determination of the characteristic's performances
4.4 Durability
4.5 Dangerous substances
5 Evaluation of conformity
5.1 General
5.2 Initial type testing of the product
5.3 Factory production control (FPC) and inspection of
samples in accordance with a prescribed test plan
5.4 Initial inspection of factory and of factory production
control
5.5 Continuous surveillance and assessment of the factory
production control
6 Marking and/or labelling
6.1 General
6.2 Product marking
6.3 Product characteristics
6.4 'Characteristics/performance identification paper'
Annex A (normative) Factory production control
Annex B (informative) Tests for ensuring conformity
Annex C (informative) Laminated safety glass: Mechanical
resistance tests
Annex D (informative) Criteria for deciding if a change
within an assembly requires a new initial type
test
Annex E (informative) Provisions for voluntary involvement
of third party(ies)
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of EU Construction
Products Directive
Bibliography
Includes the evaluation of conformity and the factory production control of laminated glass and laminated safety glass for use in buildings.
| DevelopmentNote |
COR 2005 issued on 14-05-2011. (05/2011)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 14449:2005-07 | Identical |
| NF EN 14449 : 2005 | Identical |
| NBN EN 14449 : 2005 COR 2005 | Identical |
| NS EN 14449 : 2005 AC 2006 | Identical |
| EN 14449:2005 | Equivalent |
| BS EN 14449:2005 | Equivalent |
| BS EN 14449:2005 | Identical |
| NEN EN 14449 : 2005 C1 2006 | Identical |
| UNE-EN 14449:2006 | Identical |
| PREN 13501-5 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS |
| EN 12337-1:2000 | Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description |
| EN 13024-1:2011 | Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| EN 1096-4:2004 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard |
| EN 1748-2-1:2004 | Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| PREN 14179-1 : DRAFT 2014 | GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| EN 12898:2001 | Glass in building - Determination of the emissivity |
| EN ISO 12543-2:2011 | Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) |
| ISO 12543-3:2011 | Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass |
| EN 1863-1:2011 | Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description |
| EN 14178-1:2004 | Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass |
| EN 13541:2012 | Glass in building - Security glazing - Testing and classification of resistance against explosion pressure |
| EN ISO 12543-3:2011 | Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011) |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| ISO 12543-2:2011 | Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass |
| EN 1288-3:2000 | Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending) |
| EN 12150-1:2015 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 1063:1999 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| EN 1748-1-1:2004 | Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties |
| EN 357:2004 | Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
| ISO 12543-1:2011 | Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
| ISO 12543-4:2011 | Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability |
| EN ISO 12543-4:2011 | Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011) |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| ISO 12543-6:2011 | Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance |
| EN ISO 12543-5:2011 | Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011) |
| ISO 12543-5:2011 | Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing |
| EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.