I.S. EN 14545:2008
Current
The latest, up-to-date edition.
TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Dimensions and tolerances
5.1 Method of measurement and accuracy
5.2 Length
5.3 Width
5.4 Diameter
5.5 Thickness
5.6 Other dimensions
6 Requirements
6.1 Shear plates, split ring and toothed-plate connectors
6.1.1 Materials
6.1.2 Geometry
6.1.3 Mechanical strength and stiffness
6.1.4 Corrosion protection
6.2 Punched metal plate fasteners
6.2.1 Materials
6.2.2 Geometry
6.2.3 Mechanical strength and stiffness
6.2.4 Corrosion protection
6.3 Nailing plates
6.3.1 Materials
6.3.2 Geometry
6.3.3 Mechanical strength and stiffness
6.3.4 Corrosion protection
7 Evaluation of conformity
7.1 General
7.2 Initial type testing (ITT)
7.2.1 General
7.2.2 Sampling, testing and conformity criteria
7.3 Factory production control (FPC)
7.3.1 General
7.3.2 Control
8 Marking
8.1 General
8.2 Shear plate, split ring and toothed plate connectors
8.3 Punched metal plate fasteners
8.4 Nailing plates
Annex A (normative) Expression of corrosion protection
specifications
Annex B (normative) Procedures for the derivation of mechanical
strength and stiffness characteristics of punched metal
plate fasteners
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directive
Bibliography
Describes requirements and test methods for materials, geometry, strength, stiffness and durability aspects (i.e. corrosion protection) of connectors for use in load bearing timber structures.
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 14545:2008 | Identical |
| I.S. 440:2009 | TIMBER FRAME DWELLINGS |
| ISO 9445:2002 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| ISO 8970:2010 | Timber structures Testing of joints made with mechanical fasteners Requirements for wood density |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| ISO 6891:1983 | Timber structures Joints made with mechanical fasteners General principles for the determination of strength and deformation characteristics |
| EN 912:2011 | Timber fasteners - Specifications for connectors for timbers |
| EN 26891:1991 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
| EN 28970 : 1991 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
| EN 1075:2014 | Timber structures - Test methods - Joints made with punched metal plate fasteners |
| EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.