I.S. EN 14861:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
Hardcopy , PDF
English
01-01-2004
28-11-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Information for use
Annex A (normative) List of significant hazards
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Covers all common significant hazards, hazardous situations and events of the following forestry machinery: fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors and harvesters as defined in ISO 6814.
| DevelopmentNote |
2004 Edition Re-issued in November 2009 & incorporates AMD 1 2009. (11/2009)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| BS EN 14861 : 2004 | Identical |
| DIN EN 14861:2011-06 | Identical |
| BS EN 14861 : 2004 | Equivalent |
| NS EN 14861 : 2004 + A1 2009 | Identical |
| NEN EN 14861 : 2004 + A1 2009 | Identical |
| EN 14861:2004+A1:2009 | Identical |
| NBN EN 14861 : 2004 + A1 2010 | Identical |
| EN 14861:2004 | Equivalent |
| NF EN 14861 : 2004 + A1 2009 | Identical |
| UNE-EN 14861:2005 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN ISO 2860:2008 | Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
| ISO 10532:1995 | Earth-moving machinery — Machine-mounted retrieval device — Performance requirements |
| ISO 10263-5:2009 | Earth-moving machinery — Operator enclosure environment — Part 5: Windscreen defrosting system test method |
| EN ISO 6683:2008 | Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
| ISO 11169:1993 | Machinery for forestry — Wheeled special machines — Vocabulary, performance test methods and criteria for brake systems |
| ISO 10570:2004 | Earth-moving machinery — Articulated frame lock — Performance requirements |
| ISO 8082:2003 | Self-propelled machinery for forestry — Roll-over protective structures — Laboratory tests and performance requirements |
| EN 13510:2000/AC:2003 | EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| ISO 3411:2007 | Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope |
| ISO 6683:2005 | Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests |
| EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
| EN ISO 3457:2008 | Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
| ISO 6814:2009 | Machinery for forestry — Mobile and self-propelled machinery — Terms, definitions and classification |
| ISO 3600:2015 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format |
| EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| ISO 5010:2007 | Earth-moving machinery — Rubber-tyred machines — Steering requirements |
| ISO 3767-4:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| ISO 9244:2008 | Earth-moving machinery — Machine safety labels — General principles |
| EN ISO 3450:2011 | Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011) |
| ISO 14982:1998 | Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| ISO 14269-4:1997 | Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 4: Air filter element test method |
| ISO 2860:1992 | Earth-moving machinery — Minimum access dimensions |
| ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols |
| ISO 11512:1995 | Machinery for forestry — Tracked special machines — Performance criteria for brake systems |
| ISO 6405-1:2017 | Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols |
| ISO 10263-2:2009 | Earth-moving machinery — Operator enclosure environment — Part 2: Air filter element test method |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| ISO 12100-2:2003 | Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| ISO 15078:1998 | Machinery for forestry — Log loaders — Location and method of operation of two-lever operator controls |
| ISO 13766:2006 | Earth-moving machinery — Electromagnetic compatibility |
| ISO 12100-1:2003 | Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology |
| ISO 8083:2006 | Machinery for forestry — Falling-object protective structures (FOPS) — Laboratory tests and performance requirements |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| ISO 8084:2003 | Machinery for forestry — Operator protective structures — Laboratory tests and performance requirements |
| ISO 10533:1993 | Earth-moving machinery — Lift-arm support devices |
| ISO 2867:2011 | Earth-moving machinery — Access systems |
| ISO 9533:2010 | Earth-moving machinery — Machine-mounted audible travel alarms and forward horns — Test methods and performance criteria |
| ISO 3450:2011 | Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems |
| EN 12643:2014 | Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| ISO 6750:2005 | Earth-moving machinery — Operator's manual — Content and format |
| ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.