I.S. EN 14932:2018
Current
The latest, up-to-date edition.
PLASTICS - THERMOPLASTIC STRETCH FILMS FOR WRAPPING SILAGE BALES
Hardcopy , PDF
English
01-01-2018
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Solar reflectance
6 Durability
7 Requirements
8 Test methods
9 Film acceptance
10 Designation
11 Marking of packaging
12 Instructions for use of stretch films
13 Instructions for disposal of stretch
films and end-of-life
Annex A (informative) - Exposure to other
light sources
Annex B (informative) - Numerical correlation
between durations of stretch forage films
exposed to artificial weathering and a
natural exposure
Annex C (normative) - Determination of solar
reflectance
Annex D (normative) - Determination of neck-in
during stretching
Annex E (normative) - Determination of tightening
force
Annex F (informative) - Determination of oxygen
permeability and airtightness on an artificial
bale
Annex G (informative) - Determination of adhesion
characteristic
Annex H (informative) - Guidance for use and disposal
of stretch films
Bibliography
Defines the requirements for dimensional, mechanical and optical characteristics of stretch thermoplastic films for wrapping round bales used for outdoor ensiling of forage.
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 14932:2016-05 (Draft) | Identical |
| NBN EN 14932 : 2007 | Identical |
| NF EN 14932 : 2007 | Identical |
| SN EN 14932 : 2007 | Identical |
| BS EN 14932:2006 | Identical |
| EN 14932:2018 | Identical |
| UNI EN 14932 : 2007 | Identical |
| UNE-EN 14932:2007 | Identical |
| ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
| ISO 16378:2013 | Space systems — Measurements of thermo-optical properties of thermal control materials |
| ISO 9845-1:1992 | Solar energy — Reference solar spectral irradiance at the ground at different receiving conditions — Part 1: Direct normal and hemispherical solar irradiance for air mass 1,5 |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| EN ISO 7765-1:2004 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988) |
| ISO 7765-1:1988 | Plastics film and sheeting Determination of impact resistance by the free-falling dart method Part 1: Staircase methods |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| ISO/TR 19032:2006 | Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
| EN ISO 13468-2:2006 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| ISO 15105-2:2003 | Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 13468-2:1999 | Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN 16472:2014 | Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| EN ISO 6383-2:2004 | Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983) |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| ISO 6383-2:1983 | Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method |
| ISO 10640:2011 | Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| ISO 4592:1992 | Plastics — Film and sheeting — Determination of length and width |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.