I.S. EN 1520:2011
Current
Current
The latest, up-to-date edition.
PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2011
Publisher
€139.00
Excluding VAT
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Properties and requirements of materials
5 Properties and requirements of components
6 Evaluation of conformity
7 Basis for design
8 Marking, labelling and designation
Annex A (normative) - Design of components by calculation
Annex B (informative) - Design of components by testing
Annex C (informative) - Recommended values for partial
safety factor
Annex ZA (informative) - Provisions for the CE marking of
prefabricated components of lightweight aggregate
concrete with open structure with structural or
non-structural reinforcement under the EU
Construction Product Directive
Bibliography
Pertains to prefabricated components of lightweight aggregate concrete (LAC) with open structure and with structural or non-structural reinforcement intended to be used in building construction: a) for structural elements; and b) for non-structural elements.
| DocumentType |
Standard
|
| Pages |
114
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 1520 : 2011 | Identical |
| DIN EN 1520:2011-06 | Identical |
| BS EN 1520:2011 | Identical |
| EN 1520:2011 | Identical |
| NS EN 1520 : 2011 | Identical |
| NF EN 1520 : 2011 | Identical |
| NEN EN 1520 : 2011 | Identical |
| UNE-EN 1520:2003 | Identical |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| CEN/TR 15728:2016 | Design and use of inserts for lifting and handling of precast concrete elements |
| EN 1521:1996 | Determination of flexural strength of lightweight aggregate concrete with open structure |
| ISO 717-2:2013 | Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| EN 1365-3:1999 | Fire resistance tests for loadbearing elements - Part 3: Beams |
| ISO 1716:2010 | Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value) |
| EN 1364-1:1999 | Fire resistance tests for non-loadbearing elements - Part 1: Walls |
| EN 1739:2007 | Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| ISO 140-6:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 6: Laboratory measurements of impact sound insulation of floors |
| EN 1740:1998 | Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 14388:2015 | Road traffic noise reducing devices - Specifications |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| ISO 1182:2010 | Reaction to fire tests for products — Non-combustibility test |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| ISO 12572:2016 | Hygrothermal performance of building materials and products — Determination of water vapour transmission properties — Cup method |
| EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| ISO 15148:2002 | Hygrothermal performance of building materials and products — Determination of water absorption coefficient by partial immersion |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN ISO 140-6 : 1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 1742:1998 | Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 991:1995 | Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1355:1996 | Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 1352:1996 | Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1356:1996 | Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load |
| EN 990:2002 | Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| EN 992:1995 | Determination of the dry density of lightweight aggregate concrete with open structure |
| EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| ISO 717-1:2013 | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation |
| EN 1365-4:1999 | Fire resistance tests for loadbearing elements - Part 4: Columns |
| EN 1741:1998 | Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 1365-2:2014 | Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
| EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| EN 1793-2:2012 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.