I.S. EN 15389:2008
Current
The latest, up-to-date edition.
INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance requirements
4.1 Reaction to fire
4.2 External pressure strength
4.3 Mechanical strength: Internal pressure strength
4.3.1 Determination of nominal pressure PN
4.3.2 Verification of pressure strength
4.4 Dimensional tolerances
4.5 Effectiveness: tightness (gas and liquid)
4.6 Durability of valves
4.7 Dangerous substances
4.8 Resistance to high temperature
4.9 Safeguard against overloading of handle
4.10 Noise level
5 Calculation and test methods
5.1 Reaction to fire
5.2 Determination of the nominal pressure PN for thermoplastics
materials
5.3 Internal pressure strength
5.4 Dimensional tolerances
5.5 Effectiveness: tightness gas and liquid
5.6 Durability
5.7 Safeguard against overloading of handle
6 Evaluation of conformity
6.1 General
6.2 Initial type testing
6.2.1 General
6.2.2 Initial type test requirements
6.3 Factory production control
6.3.1 General
6.3.2 FPC requirements
6.3.3 FPC system requirements
6.4 One-off products and products produced in very low quantities
Annex A (normative) Product standards for building and civil
engineering applications for the delivery of liquid
and gaseous fluids
Annex B (normative) Standards for assessment of conformity for
building and civil engineering applications for the
delivery of liquid and gaseous fluids
Annex ZA (informative) Clauses of this European Standard addressing
the provisions of EU Construction Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for attestation of conformity of valves made
of thermoplastic materials
ZA.2.1 Systems of attestation of conformity
ZA.2.2 EC Certificate and Declaration of conformity
ZA.3 CE marking and labelling
ZA.3.1 CE marking requirements
ZA.3.2 Simplified CE marking with reference to a web site
ZA.3.2.1 General
ZA.3.2.2 Minimum rules for the proper use of a
web site for CE marking information
Bibliography
Describes performance requirements and means for evaluation of conformity for valves of thermoplastic material, by reference to product standards, for use in building and civil engineering applications for the delivery of liquid and gaseous fluids.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 15389:2008 | Identical |
| ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
| EN ISO 3126:2005 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
| ISO 9393-2:2005 | Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 2: Test conditions and basic requirements |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| EN ISO 9080:2012 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) |
| CEN/TR 15438:2007 | Plastics piping systems - Guidance for coding of products and their intended uses |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
| ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
| ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
| ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.