I.S. EN 16286-2:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS
Hardcopy , PDF
English
01-01-2013
07-12-2023
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Instrumentation and calibration
5 Measurement setup
6 Test procedure
7 Presentation of results
8 Quality of the measurements
9 Test report
Annex A (normative) - Method to qualify the sound field
on the surface of the test specimen in the
source room
Bibliography
Describes a measurement method and conditions to obtain reproducible and comparable sound reduction indices of all kinds of rail bound vehicles' gangway systems defined in EN 16286-1.
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 16286-2:2013 | Identical |
| DIN EN 16286-2:2013-09 | Equivalent |
| DIN EN 16286-2:2013-06 | Equivalent |
| BS EN 16286-2:2013 | Equivalent |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 10140-2:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation |
| EN 16286-1:2013 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| EN 61043:1994 | Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones |
| EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
| EN ISO 10140-4:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010) |
| ISO 10140-1:2016 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| ISO 10140-4:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements |
| EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| ISO 1996-1:2016 | Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| ISO 717-1:2013 | Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation |
| EN ISO 15186-1:2003 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000) |
| ISO 3741:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms |
| ISO 10140-3:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation |
| ISO 10140-5:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment |
| EN ISO 266:1997 | Acoustics - Preferred frequencies (ISO 266:1997) |
| ISO 15186-1:2000 | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements |
| EN 60942:2003 | Electroacoustics - Sound calibrators |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.