I.S. EN 1709:2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
Hardcopy , PDF
30-11-2019
English
01-01-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 Application of this standard
4.2 Safety principles
4.2.1 General
4.2.2 Hazard scenarios
4.2.3 Safety measures
5 Verifications and pre-commissioning inspection
5.1 Submission of the documents for the installation
(design, implementation) including verification by
calculation
5.2 Submission of verification of the suitability of
materials and components
5.3 Pre-commissioning inspection
5.3.1 General
5.3.2 Verification of conformity of the installation
with the submitted documents
5.3.3 Check and operating test of the individual
components, their operation with each other
and within their local environment
5.3.4 Operating test
5.3.5 Report on the pre-commissioning inspection
5.4 Delivery of required documents to the operator
5.5 Certification of readiness for acceptance
6 Maintenance
6.1 General
6.2 Servicing
6.3 Inspection
6.3.1 General
6.3.2 First inspection of construction works
6.3.3 Monthly inspections
6.3.4 Inspection in the case of intermittent operation
6.3.5 Annual inspections
6.3.6 Special multiannual inspections
6.3.7 Special inspections
6.4 Repair
6.5 Renewal of construction works
7 Operational inspections and checks
7.1 General
7.2 Daily inspection and test run prior to opening to
the public
7.2.1 General
7.2.2 Daily inspections
7.2.3 Daily test run
7.3 Checks during operation
7.4 Operational inspections and test runs after exceptional
events
8 Maintenance and operational inspection documentation
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of
EU Directive 2000/9/EC relating to cableway
installations designed to carry persons
Describes the safety requirements applicable to the pre-commissioning inspection, maintenance and operational inspections and checks of cableway installations designed to carry persons. This standard is applicable to the various types of installations and takes into account their environment.
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
NEN EN 1709 : 2004 | Identical |
UNE-EN 1709:2006 | Identical |
EN 1709:2004 | Identical |
NF EN 1709 : 2004 | Identical |
DIN EN 1709:2005-06 | Identical |
NS EN 1709 : 1ED 2005 | Identical |
NBN EN 1709 : 2004 | Identical |
SN EN 1709 : 2005 | Identical |
BS EN 1709:2004 | Identical |
UNI EN 1709 : 2007 | Identical |
ONORM EN 1709 : 2005 | Identical |
EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
PREN 1907 : DRAFT 2014 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TERMINOLOGY |
EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
ENV 1090-1 : DRAFT 1996 | EXECUTION OF STEEL STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
PREN 13796-2 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS |
EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
EN 12927-8:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
PREN 13796-3 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.