I.S. EN 1983:2013
Current
The latest, up-to-date edition.
INDUSTRIAL VALVES - STEEL BALL VALVES
Hardcopy , PDF
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test procedures
6 Declaration of compliance
7 Designation
8 Marking and preparation for storage and
transportation
Annex A (normative) - Anti-static design
Annex B (informative) - Information to be
supplied by the purchaser
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED)
Bibliography
Describes requirements for industrial steel ball valves having flanged, threaded, socket welding or butt welding ends.
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 1983:2013 | Identical |
| NS EN 1983 : 2013 | Identical |
| NEN EN 1983 : 2013 | Identical |
| NBN EN 1983 : 2013 | Identical |
| EN 1983:2013 | Identical |
| NF EN 1983 : 2013 | Identical |
| UNE-EN 1983:2014 | Identical |
| DIN EN 1983:2013-12 | Identical |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
| EN 13445-5 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
| EN 12351:2010 | Industrial valves - Protective caps for valves with flanged connections |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| EN 12760:2016 | Industrial valves - Socket welding ends for steel valves |
| EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| EN ISO 5211:2017 | Industrial valves - Part-turn actuator attachments (ISO 5211:2017) |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.