I.S. EN 312:2010
Current
The latest, up-to-date edition.
PARTICLEBOARDS - SPECIFICATIONS
Hardcopy , PDF
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classifications
5 General requirements for all board types
6 Requirement values
7 Requirements for general purpose boards for use in dry
conditions (Type P1)
8 Requirements for boards for interior fitments (including
furniture) for use in dry conditions (Type P2)
9 Requirements for non load-bearing boards for use in humid
conditions (Type P3)
10 Requirements for load-bearing boards for use in dry
conditions (Type P4)
11 Requirements for load-bearing boards for use in humid
conditions (Type P5)
12 Requirements for heavy duty load-bearing boards for use
in dry conditions (Type P6)
13 Requirements for heavy duty load-bearing boards for use
in humid conditions (Type P7)
14 Supplementary properties
15 Verification of compliance
16 Marking
Annex A (normative) - Voluntary colour coding system for
particleboards
Bibliography
Describes the requirements for flat-pressed or calendar-pressed unfaced particleboards.
| DevelopmentNote |
Supersedes I.S. EN 312-1, -2, -3, -4, -5, -6 and -7. (11/2003) Supersedes I.S. 241-1 & I.S. 241-2. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 312 : 2010 | Identical |
| EN 312:2010 | Identical |
| NEN EN 312 : 2010 | Identical |
| UNE-EN 312:2010 | Identical |
| UNI EN 312 : 2010 | Identical |
| NF EN 312 : 2010 | Identical |
| BS EN 312:2010 | Identical |
| NS EN 312 : 1ED 2010 | Identical |
| SN EN 312 : 2010 | Identical |
| DIN EN 312:2010-12 | Identical |
| I.S. 440:2009 | TIMBER FRAME DWELLINGS |
| S.R. 82:2017 | SLATING AND TILING - CODE OF PRACTICE |
| I.C.P. 2:2002 | SLATING AND TILING |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 14755:2005 | Extruded particleboards - Specifications |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
| ISO 3340:1976 | Fibre building boards — Determination of sand content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.