I.S. EN 438-7:2005
Current
The latest, up-to-date edition.
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
Hardcopy , PDF
English
01-01-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics
4.1 Conditioning of specimens
4.2 Reaction to fire
4.3 Fire resistance
4.4 Water vapour permeability
4.5 Resistance to fixings
4.6 Direct airborne sound insulation
4.7 Bonding strength
4.8 Flexural tensile strength
4.9 Thermal resistance/conductivity
4.10 Release of dangerous substances
4.11 Additional characteristics for internal use
4.12 Additional characteristics for external use
4.13 Durability
5 Evaluation of conformity
5.1 General
5.2 Type testing
5.3 Factory production control (FPC)
6 Marking and labelling
Annex A (informative) Other European Standards for HPL
products
Annex B (normative) Specimen mounting details for SBI
fire testing
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other
provisions of EU Directives
Bibliography
Specifies the health, safety and energy saving requirements for, compact laminate panels/sidings for interior wall and ceiling finishes (including suspended ceilings), HPL composite panels/sidings for interior wall and ceiling finishes (including suspended ceilings), compact laminate panels/sidings for exterior wall and ceiling finishes (including suspended ceilings), HPL composite panels/sidings for exterior wall and ceiling finishes (including suspended ceilings).
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 438-7 : 2005 | Identical |
| BS EN 438-7:2005 | Identical |
| NEN EN 438-7 : 2005 | Identical |
| NS EN 438-7 : 1ED 2005 | Identical |
| NF EN 438-7 : 2005 | Identical |
| NBN EN 438-7 : 2005 | Identical |
| UNI EN 438-7 : 2005 | Identical |
| EN 438-7:2005 | Identical |
| DIN EN 438-7:2005-04 | Identical |
| UNE-EN 438-7:2005 | Identical |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| ISO 13894-1:2000 | High-pressure decorative laminates Composite elements Part 1: Test methods |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 438-6:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| EN 438-1:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.