I.S. EN 60335-1:2012& AC :2014& A11:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Household and similar electrical appliances - Safety - Part 1: General requirements
27-08-2014
05-02-2020
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
12 Void
13 Leakage current and electric strength at operating temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annex A (informative) Routine tests
Annex B (normative) Appliances powered by rechargeable batteries that are
recharged in the appliance
Annex C (normative) Ageing test on motors
Annex D (normative) Thermal motor protectors
Annex E (normative) Needle-flame test
Annex F (normative) Capacitors
Annex G (normative) Safety isolating transformers
Annex H (normative) Switches
Annex I (normative) Motors having basic insulation that is inadequate for the rated
voltage of the appliance
Annex J (normative) Coated printed circuit boards
Annex K (normative) Overvoltage categories
Annex L (informative) Guidance for the measurement of clearances and creepage
distances
Annex M (normative) Pollution degree
Annex N (normative) Proof tracking test
Annex O (informative) Selection and sequence of the tests of Clause 30
Annex P (informative) Guidance for the application of this standard to appliances
used in tropical climates
Annex Q (informative) Sequence of tests for the evaluation of electronic circuits
Annex R (normative) Software evaluation
Annex S (normative) Battery-operated appliances powered by batteries that are nonrechargeable
or not recharged in the appliance
Annex T (normative) UV-C radiation effect on non-metallic materials
Bibliography
This International Standard deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
| Committee |
CLC/TC 61
|
| DocumentType |
Standard
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. THIS STANDARD ALSO REFERS-IEC 60417 , IEC 60730-2-8:2000
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| EN 60335-1:2012/A11:2014 | Identical |
| IEC 60335-1:2010+AMD1:2013+AMD2:2016 CSV | Identical |
| EN 60335-1:2012 | Identical |
| CISPR 14-1:2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| IEC GUIDE 110:2014 | Home control systems - Guidelines relating to safety |
| CISPR 11:2015 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO/IEC Guide 14:2003 | Purchase information on goods and services intended for consumers |
| ISO 1463:2003 | Metallic and oxide coatings — Measurement of coating thickness — Microscopical method |
| IEC 60364-8-1:2014 | Low-voltage electrical installations - Part 8-1: Energy efficiency |
| IEC 61029-2-12:2010 | Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines |
| IEC 60721-2-1:2013 | Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| ISO/IEC Guide 50:2014 | Safety aspects — Guidelines for child safety in standards and other specifications |
| IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| ISO/IEC Guide 37:2012 | Instructions for use of products by consumers |
| CISPR 14-2:2015 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| IEC 61508-7:2000 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see <a>www.iec.ch/61508</a>) |
| IEC 60086-2:2015 | Primary batteries - Part 2: Physical and electrical specifications |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method |
| IEC 60335-2-29:2016 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
| ISO/IEC Guide 71:2014 | Guide for addressing accessibility in standards |
| IEC 60950-1:2005 | Information technology equipment - Safety - Part 1: General requirements |
| IEC 61000-3-2:2014 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
| IEC 61000-3-3:2013 | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
| IEC 61508-3:1998 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see <a>www.iec.ch/61508</a>) |
| IEC 60601-3-1:1996 | Medical electrical equipment - Part 3-1: Essential performance requirement for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment |
| IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.