I.S. EN 60456:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
Hardcopy , PDF
06-02-2021
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
5 Test conditions, materials, equipment and instrumentation
6 Preparation for testing
7 Performance measurements - general requirements
8 Tests for performance
9 Assessment of performance
10 Shrinkage during the wool wash programme
11 Data to be reported
Bibliography
Annex A (normative) - Specification of stain test strips with
standardized soiling
Annex B (normative) - Reference detergent A*
Annex C (normative) - Specifications for base loads
Annex D (normative) - Reference machine specification
Annex E (normative) - Reference machine programme definitions
Annex F (informative) - Reference programmes and examples
of comparable washing machine programmes
Annex G (normative) - The bone-dry method
of conditioning
Annex H (normative) - Folding and loading the test load
Annex I (normative) - Calculation of weighted average age
of the cotton base load
Annex J (normative) - Loading a large standard extractor
(rinsing performance)
Annex K (informative) - Laboratory internal testing guide
Annex L (normative) - Measurement of energy consumption
in low power modes of washing machines
Annex M (normative) - Testing procedure for manual washing
machines
Annex N (normative) - Procedure to determine test load size
where rated capacity is not declared
Annex O (informative) - Additional evaluation of washing
performance
Annex P (informative) - Testing deviations to reduce costs
and their limitations
Annex Q (informative) - Uncertainty of measurements in
IEC 60456
Annex R (informative) - Environmental aspects of washing
machine use determined in IEC 60456
Annex S (normative) - Test report - data to be reported
Annex T (normative) - Wool shrinkage specimens
Annex U (informative) - Sources of materials and supplies
Bibliography
Annex ZA (normative) - Test procedure for a combined
test sequence of cotton 40 degree C and cotton
60 degree C with full load and partial load
Annex ZB (normative) - Tolerances and control procedures
Annex ZC (normative) - Normative references to
international publications with their
corresponding European publications
Annex ZZA (informative) - Relationship between this
European Standard and the energy labelling
Requirements of Commission Delegated Regulation
(EU) No 1061/2010 aimed to be covered
Annex ZZB (informative) - Relationship between this
European Standard and the ecodesign requirements
of Commission Regulation (EU) No 1015/2010
aimed to be covered
Describes methods for measuring the performance of Clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
230
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 60456:2016 | Identical |
| NF EN 60456 : 2005 AMD 11 2006 | Identical |
| EN 60456:2016 | Identical |
| SN EN 60456 : 2016 | Identical |
| NBN EN 60456 : 2016 | Identical |
| DIN EN 60456 : 2017 | Identical |
| UNE-EN 60456:2016 | Identical |
| IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 7211-2:1984 | Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| IEC 61121:2012 | Tumble dryers for household use - Methods for measuring the performance |
| ISO/IEC Guide 58:1993 | Calibration and testing laboratory accreditation systems General requirements for operation and recognition |
| EN ISO 3759:2011 | Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011) |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| IEC 62053-21:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) |
| EN 60704-2-4:2012 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
| IEC 60704-1:2010 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements |
| EN ISO 2060:1995 | Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
| IEC 60704-2-4:2011 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| IEC 60734:2012 | Household electrical appliances - Performance - Water for testing |
| IEC TR 61923:1997 | Household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| IEC 60335-2-7:2008+AMD1:2011+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-7:Particular requirements for washing machines |
| EN 50564:2011 | Electrical and electronic household and office equipment - Measurement of low power consumption |
| IEC 62301:2011 | Household electrical appliances - Measurement of standby power |
| ISO 4319:1977 | Surface active agents — Detergents for washing fabrics — Guide for comparative testing of performance |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| IEC TR 61592:2003 | Household electrical appliances - Guidelines for consumer panel testing |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| IEC PAS 62473:2007 | Clothes washing machines for household use - Methods for measuring the mechanical action in household washing machines |
| ISO 3759:2011 | Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
| EN 60704-3:2006 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| EN 50229 : 2015 COR 2016 | ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| ISO 3801:1977 | Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area |
| EN 60734:2012 | Household electrical appliances - Performance - Water for testing |
| ISO 2060:1994 | Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| DIN 53923:1978-01 | Testing of textiles; determination of water absorption of textile fabrics |
| IEC TR 62617:2015 | Home laundry appliances - Uncertainty reporting of measurements |
| ISO/CIE 10526:1999 | CIE standard illuminants for colorimetry |
| ISO 2061:2015 | Textiles Determination of twist in yarns Direct counting method |
| EN 60335-2-7:2010/A11:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| ISO/IEC Guide 46:2017 | Comparative testing of consumer products and related services General principles |
| EN 60704-1:2010/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010) |
| EN 12127:1997 | Textiles - Fabrics - Determination of mass per unit area using small samples |
| ISO/IEC Guide 43-2:1997 | Proficiency testing by interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies |
| EN ISO 2061:2015 | Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015) |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.