13/30278127 DC : 0
|
BS ISO 20752 - CORK STOPPERS - DETERMINATION OF RELEASABLE 2, 4, 6-TRICHLOROANISOL (TCA) |
UNI CEI 70016 : 2008
|
CONFORMITY ASSESSMENT - CODE OF GOOD PRACTICE |
ISO/TS 20612:2007
|
Water quality Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories |
08/30181397 DC : DRAFT APR 2008
|
BS EN 60456 - CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
I.S. EN 60456:2016
|
CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
CEI UNI EN ISO/IEC 17025 : 2008
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
IEC 60456:2010
|
Clothes washing machines for household use - Methods for measuring the performance |
DIN EN ISO 13366-2:2007-01
|
Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006) |
EN 12311-2:2013
|
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
EN ISO 13366-2:2006/AC:2007
|
MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS |
CEN/TS 15234:2006
|
Solid biofuels - Fuel quality assurance |
CEN/TS 15675:2007
|
Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements |
ISO/TR 22869:2005
|
Medical laboratories Guidance on laboratory implementation of ISO 15189: 2003 |
PD ISO/IEC Guide 67:2004
|
Conformity asessment. Fundamentals of product certification |
CSA PLUS 15189 : 2010
|
THE ISO 15189:2007 ESSENTIALS - A PRACTICAL HANDBOOK FOR IMPLEMENTING THE ISO 15189:2007 STANDARD FOR MEDICAL LABORATORIES |
11/30252162 DC : 0
|
BS EN 62209-1 - HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 1: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR)FOR DEVICES USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
FD X07 022 : 2004 FD
|
METROLOGY AND STATISTICAL APPLICATIONS - USE OF UNCERTAINTIES OF MEASUREMENTS: PRESENTATION OF SOME CASES AND COMMON PRACTICES |
06/30112308 DC : 0
|
EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS |
BS ISO 14624-3:2005
|
Space systems. Safety and compatibility of materials Determination of offgassed products from materials and assembled articles |
12/30244420 DC : 0
|
BS ISO 13304 - RADIOLOGICAL PROTECTION - MINIMUM CRITERIA FOR ELECTRON PARAMAGNETIC RESONANCE (EPR) SPECTROSCOPY FOR RETROSPECTIVE DOSIMETRY OF IONIZING RADIATION |
DD CEN/TS 15234:2006
|
Solid biofuels. Fuel quality assurance |
10/30219009 DC : 0
|
BS EN 15234-1 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
DD CEN/TS 15675:2007
|
Air quality. Measurement of stationary source emissions. Application of EN ISO/IEC 17025:2005 to periodic measurements |
CSA Z22870 : 2007 : R2013
|
POINT-OF-CARE TESTING (POCT) - REQUIREMENTS FOR QUALITY AND COMPETENCE |
I.S. CEN TS 15234:2006
|
SOLID BIOFUELS - FUEL QUALITY ASSURANCE |
ISO/TS 21748:2004
|
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
CSA Z22870:2007
|
POINT-OF-CARE TESTING (POCT) - REQUIREMENTS FOR QUALITY AND COMPETENCE |
S.R. CEN TS 15675:2007
|
AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - APPLICATION OF EN ISO/IEC 17025:2005 TO PERIODIC MEASUREMENTS |
PREN ISO 15189 : DRAFT 2011
|
MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
ISO 13304-1:2013
|
Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles |
DIN EN 12311-2:2013-11
|
FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
BS EN ISO 13366-2:2006
|
Milk. Enumeration of somatic cells Guidance on the operation of fluoro-opto-electronic counters |
DIN EN ISO 7218:2014-09
|
MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007 + AMD 1:2013, CORRECTED VERSION 2014-04-15) |
I.S. EN ISO 13366-2:2006
|
MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS |
I.S. EN 12311-2:2013
|
FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
I.S. EN ISO 7218:2007
|
MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007) |
EN 60456:2016
|
Clothes washing machines for household use - Methods for measuring the performance |
BS ISO 14624-2:2003
|
Space systems. Safety and compatibility of materials Determination of flammability of electrical-wire insulation and accessory materials |
PD CLC/TS 50640:2015
|
Clothes washing machines for commercial use. Methods for measuring the performance |
11/30173018 DC : 0
|
BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
03/317065 DC : DRAFT NOV 2003
|
ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
04/30090846 DC : DRAFT JUL 2004
|
BS ISO 22870 - POINT-OF-CARE TESTING (POCT) - REQUIREMENTS FOR QUALITY AND COMPETENCE |
BIS IS/ISO/IEC 17025 : 2005 AMD 1
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
PD 6644-2:1999
|
Proficiency testing by interlaboratory comparisons Selection and use of proficiency testing schemes by laboratory accreditation bodies |
CEI UNI EN ISO/IEC 17011 : 2008
|
CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
S.R. CLC/TS 50640:2015
|
CLOTHES WASHING MACHINES FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE |
IPC TM 650-MDP : 2012
|
IPC TEST METHOD DEVELOPMENT PACKET |
ISO/IEC Guide 43-2:1997
|
Proficiency testing by interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies |
ISO 14624-1:2003
|
Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials |
EN 14136:2004
|
Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
UNI EN 12311-2 : 2013
|
FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
06/30141610 DC : DRAFT AUG 2006
|
ISO 20612 - WATER QUALITY - INTERLABORATORY COMPARISONS FOR PROFICIENCY TESTING OF ANALYTICAL TESTING LABORATORIES |
CLSI MM14 A : 1ED 2005
|
PROFICIENCY TESTING (EXTERNAL QUALITY ASSESSMENT) FOR MOLECULAR METHODS |
DD ISO/TS 21748:2004
|
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
01/561148 DC : DRAFT MAR 2001
|
BS EN 14136 - USE OF EXTERNAL QUALITY ASSESSMENT SCHEMES IN THE ASSESSMENT OF THE PERFORMANCE OF IN VITRO DIAGNOSTIC PROCEDURES |
03/317040 DC : DRAFT NOV 2003
|
ISO/IEC GUIDE 67 - FUNDAMENTALS OF PRODUCT CERTIFICATION |
09/30191982 DC : 0
|
BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
04/30108568 DC : 0
|
ISO/IEC GUIDE 60 - CODE OF GOOD PRACTICE FOR CONFORMITY ASSESSMENT |
PD ISO/TR 10017:2003
|
Guidance on statistical techniques for ISO 9001:2000 |
ISO 14624-2:2003
|
Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials |
ISO 14624-3:2005
|
Space systems — Safety and compatibility of materials — Part 3: Determination of offgassed products from materials and assembled articles |
CSA Z15189 : 2003
|
MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
ISO/IEC Guide 60:2004
|
Conformity assessment Code of good practice |
S.R. ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
IEC PAS 63125:2017
|
Clothes washing machines for commercial use - Methods for measuring the performance |
ISO/IEC Guide 67:2004
|
Conformity assessment Fundamentals of product certification |
ISO 7218:2007
|
Microbiology of food and animal feeding stuffs General requirements and guidance for microbiological examinations |
DIN EN 12311-2 E : 2013
|
FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
UNE-EN 60456:2016
|
Clothes washing machines for household use - Methods for measuring the performance |
ISO 13366-2:2006
|
Milk Enumeration of somatic cells Part 2: Guidance on the operation of fluoro-opto-electronic counters |
UNE-EN 12311-2:2013
|
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
EN ISO 7218 : 2007 COR 2014
|
MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007/AMD 1:2013, CORRECTED VERSION 2014-04-15) |
BIS IS 16122 : 2013
|
MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS |
BS ISO 14624-4:2003
|
Space systems. Safety and compatibility of materials Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments |
05/30057945 DC : DRAFT APR 2005
|
BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
IEC PAS 63151:2018
|
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Vector measurement-based systems (Frequency range of 30 MHz to 6 GHz) |
SAE J 2636 : 2015
|
CORROSION TEST MASTER ESTABLISHMENT |
08/30139611 DC : DRAFT JUNE 2008
|
BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
CSA ISO/TR 10017 : 2003 : R2013
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
CSA ISO/TR 10017:2003
|
GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
IEEE 1528-2013 REDLINE
|
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
S.R. ISO/TR 22869:2006
|
MEDICAL LABORATORIES - GUIDANCE ON LABORATORY IMPLEMENTATION OF ISO 15189: 2003 |
BS EN 60456:2016
|
Clothes washing machines for household use. Methods for measuring the performance |
ISO 14624-4:2003
|
Space systems — Safety and compatibility of materials — Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments |
ISO/TS 13530:2009
|
Water quality — Guidance on analytical quality control for chemical and physicochemical water analysis |
BS EN 12311-2:2013
|
Flexible sheets for waterproofing. Determination of tensile properties Plastic and rubber sheets for roof waterproofing |
BS EN 14136:2004
|
Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
BS EN ISO 7218 : 2007
|
MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS |
DIN EN 14136:2004-08
|
Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
CLC/TS 50640:2015
|
Clothes washing machines for commercial use - Methods for measuring the performance |