I.S. EN 60728-1:2014
Current
The latest, up-to-date edition.
CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS
Hardcopy , PDF
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Methods of measurement at system outlet
5 Performance requirements at system outlet
6 Performance requirements at receiving antennas
7 Performance requirements at home network interfaces
of cable networks
Annex A (informative) - Reception of television signals
Annex B (normative) - Calibration of modulation depth
Annex C (normative) - Equipment required - Additional
items
Annex D (normative) - Preliminary checks on the measuring
equipment for carrier-to-noise ratio
Annex E (normative) - Correction factors
Annex F (normative) - Calibration of the measuring receiver
Annex G (normative) - Correction factors for noise
Annex H (normative) - Null packet and PRBS definitions
Annex I (normative) - Digital signal level and bandwidth
Annex J (normative) - Correction factor for a spectrum
analyser
Annex K (informative) - Differences in some countries
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Annex ZB (informative) - A-deviations
Pertains to any cable network (including individual receiving systems) having in the forward path a coaxial cable output and primarily intended for television and sound signals operating between about 30 MHz and 3000 MHz.
DevelopmentNote |
Supersedes I.S. EN 50083-7. (01/2010) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
170
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 60728-1:2014 | Identical |
IEC 60050-713:1998 | International Electrotechnical Vocabulary (IEV) - Part 713: Radiocommunications: transmitters, receivers, networks and operation |
ISO/IEC 14496-1:2010 | Information technology — Coding of audio-visual objects — Part 1: Systems |
IEC 60728-11:2016 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
EN 60966-2-4:2016 | Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors |
EN 300 748 : 1.1.2 | DIGITAL VIDEO BROADCASTING (DVB); MULTIPOINT VIDEO DISTRIBUTION SYSTEMS (MVDS) AT 10 GHZ AND ABOVE |
ISO/IEC 13818-1:2015 | Information technology Generic coding of moving pictures and associated audio information Part 1: Systems |
EN 300 744 : 1.6.2 | DIGITAL VIDEO BROADCASTING (DVB); FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR DIGITAL TERRESTRIAL TELEVISION |
EN 300 421 : 1.1.2 | DIGITAL VIDEO BROADCASTING (DVB): FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR 11/12 GHZ SATELLITE SERVICES |
ISO/IEC 13818-2:2013 | Information technology — Generic coding of moving pictures and associated audio information — Part 2: Video |
IEC 60966-2-6:2016 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors |
IEC 60728-3:2010 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
EN 60966-2-6:2017 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors |
EN 50083-8:2013 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS |
TS 102 831 : 1.2.1 | DIGITAL VIDEO BROADCASTING (DVB); IMPLEMENTATION GUIDELINES FOR A SECOND GENERATION DIGITAL TERRESTRIAL TELEVISION BROADCASTING SYSTEM (DVB-T2) |
EN 300 429 : 1.2.1 | DIGITAL VIDEO BROADCASTING (DVB): FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR CABLE SYSTEMS |
EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
IEC 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks |
IEC 60728-2:2010 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
IEC 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) |
EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
EN 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks |
EN 50248 : 2001 COR 2007 | CHARACTERISTICS OF DAB RECEIVERS |
ISO/IEC 14496-3:2009 | Information technology Coding of audio-visual objects Part 3: Audio |
IEC 60728-5:2015 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
IEC 60050-701:1988 | International Electrotechnical Vocabulary (IEV) - Part 701: Telecommunications, channels and networks |
EN 50117-2-4 : 2004 AMD 2 2013 | COAXIAL CABLES - PART 2-4: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
IEC 60966-2-5:2016 | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors |
IEC 60966-2-4:2016 | Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors |
EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
EN 60966-2-5:2017 | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors |
ISO/IEC 13818-3:1998 | Information technology Generic coding of moving pictures and associated audio information Part 3: Audio |
IEC 60728-12:2017 | Cable networks for television signals, sound signals and interactive services - Part 12: Electromagnetic compatibility of systems |
IEC 60728-1-2:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation |
EN 300 749 : 1.1.2 | DIGITAL VIDEO BROADCASTING (DVB); MICROWAVE MULTIPOINT DISTRIBUTION SYSTEMS (MMDS) BELOW 10 GHZ |
TS 101 211 : 1.12.1 | DIGITAL VIDEO BROADCASTING (DVB); GUIDELINES ON IMPLEMENTATION AND USAGE OF SERVICE INFORMATION (SI) |
ETS 300 784 : 20001 | SATELLITE EARTH STATIONS AND SYSTEMS (SES); TELEVISION RECEIVE-ONLY (TVRO) SATELLITE EARTH STATIONS OPERATING IN THE 11/12 GHZ FREQUENCY BANDS |
EN 302 307 : 1.3.1 | DIGITAL VIDEO BROADCASTING (DVB); SECOND GENERATION FRAMING STRUCTURE, CHANNEL CODING AND MODULATION SYSTEMS FOR BROADCASTING, INTERACTIVE SERVICES, NEWS GATHERING AND OTHER BROADBAND SATELLITE APPLICATIONS (DVB-S2) |
IEC 60050-705:1995 | International Electrotechnical Vocabulary (IEV) - Part 705: Radio wave propagation |
ISO/IEC 14496-4:2004 | Information technology — Coding of audio-visual objects — Part 4: Conformance testing |
EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
IEC 60050-712:1992 | International Electrotechnical Vocabulary (IEV) - Part 712: Antennas |
ISO/IEC 13818-4:2004 | Information technology — Generic coding of moving pictures and associated audio information — Part 4: Conformance testing |
EN 300 473 : 1.1.2 | DIGITAL VIDEO BROADCASTING (DVB); SATELLITE MASTER ANTENNA TELEVISION (SMATV) DISTRIBUTION SYSTEMS |
EN 302 755 : 1.4.1 | DIGITAL VIDEO BROADCASTING (DVB); FRAME STRUCTURE CHANNEL CODING AND MODULATION FOR A SECOND GENERATION DIGITAL TERRESTRIAL TELEVISION BROADCASTING SYSTEM (DVB-T2) |
IEC 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return paths |
ISO/IEC 14496-2:2004 | Information technology Coding of audio-visual objects Part 2: Visual |
IEC 61169-2:2007 | Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
TR 101 290 : 1.3.1 | DIGITAL VIDEO BROADCASTING (DVB); MEASUREMENT GUIDELINES FOR DVB SYSTEMS |
EN 60728-1-2:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation |
IEC 60050-725:1994 | International Electrotechnical Vocabulary (IEV) - Part 725: Space radiocommunications |
EN 300 468 : 1.15.1 | DIGITAL VIDEO BROADCASTING (DVB); SPECIFICATION FOR SERVICE INFORMATION (SI) IN DVB SYSTEMS |
EN 60728-5:2016 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.