I.S. EN 61800-7-302:2016
Current
Current
The latest, up-to-date edition.
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-302: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 2 TO NETWORK TECHNOLOGIES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2016
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Principles for mapping CIP Motion[TM]
5 Mapping to DeviceNet[TM]
6 Mapping to ControlNet[TM]
7 Mapping to EtherNet/IP[TM]
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Defines the mapping of the profile type 2 (CIP MotionTM) specified in IEC 61800-7-202 onto different network technologies.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
82
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 61800-7-302:2016 | Identical |
| IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
| IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| EN 61158-6-2:2014 | Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements |
| IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| IEC 61800-7-303:2015 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
| EN 61800-7-303:2016 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
| IEC 61800-7-1:2015 | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition |
| EN 61800-7-304:2016 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| EN 61499-1:2013 | Function blocks - Part 1: Architecture |
| IEC 61800-7-204:2015 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
| EN 61800-7-202:2016 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| IEC 61158-6-2:2014 | Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements |
| IEC 61800-7-304:2015 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| IEC TR 62390:2005 | Common automation device - Profile guideline |
| EN 61800-7-201:2016 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| IEC 62026-3:2014 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| ISO 15745-1:2003 | Industrial automation systems and integration Open systems application integration framework Part 1: Generic reference description |
| EN 50325-4:2002 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen |
| ISO/IEC 2382-15:1999 | Information technology Vocabulary Part 15: Programming languages |
| ISO/IEC 19501:2005 | Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2 |
| EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| IEC 61800-7-201:2015 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| EN 61158-4-2:2014 | Industrial communication networks - Fieldbus specifications -Part 4-2: Data-link layer protocol specification - Type 2 elements |
| IEC 61588:2009 | Precision clock synchronization protocol for networked measurement and control systems |
| IEC 61800-7-203:2015 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| IEC 61499-1:2012 | Function blocks - Part 1: Architecture |
| EN 61800-7-1:2016 | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition |
| EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| IEC 61158-5-2:2014 | Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements |
| IEC 61158-3-2:2014 | Industrial communication networks - Fieldbus specifications - Part 3-2: Data-lonk layer service definition - Type 2 elements |
| EN 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
| EN 61800-7-204:2016 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
| IEC 61800-7-301:2015 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies |
| EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| EN 61158-5-2:2014 | Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements |
| EN 61158-3-2:2014 | Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements |
| IEC 61800-7-202:2015 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| EN 61800-7-203:2016 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| EN 61800-7-301:2016 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies |
| IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.