I.S. EN 61850-8-1:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 8-1: SPECIFIC COMMUNICATION SERVICE MAPPING (SCSM) - MAPPINGS TO MMS (ISO 9506-1 AND ISO 9506-2) AND TO ISO/IEC 8802-3
Hardcopy , PDF
13-05-2020
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Overview
6 Communication stack
7 Objects of IEC 61850
8 Mapping of IEC 61850-7-2 and IEC 61850-7-3 data
attributes
9 Server class model
10 Association model
11 Logical device model
12 Logical node model
13 DataObject, DataAttribute, SubDataAttribute model
14 Data set class model
15 Service Tracking model
16 Setting group control class model
17 Reporting and logging class model
18 Mapping of the generic substation event model (GSE)
19 Transmission of sampled values class model
20 Control class model
21 Time and time synchronization model
22 Naming conventions
23 File transfer
24 Conformance
25 Substation Configuration Language (SCL)
Annex A (normative) - Application protocol specification
for GOOSE and GSE management
Annex B (informative) - Multicast address selection
Annex C (normative) - Overview of ISO/IEC 8802-3 frame
structure for GSE management and GOOSE
Annex D (informative) - SCL conformance
Annex E (informative) - Time scales and epochs
Annex F (normative) - Type extensions to ISO 9506-1:2003
and ISO 9506-2:2003
Annex G (informative) - Example SCL File
Annex H (informative) - Generic Substation State Event
(GSSE)
Annex I (informative) - Certificate management
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Describes a method of exchanging time-critical and non-time-critical data through local-area networks by mapping ACSI to MMS and ISO/IEC 8802-3 frames.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
199
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| IEC 61850-8-1:2011 | Identical |
| DIN EN 61850-8-1:2012-02 | Identical |
| BS EN 61850-8-1:2011 | Identical |
| NF EN 61850-8-1 : 2012 | Identical |
| NBN EN 61850-8-1 : 2011 | Identical |
| EN 61850-8-1:2011 | Identical |
| ISO/ISP 14226-1:1996 | Industrial automation systems — International Standardized Profile AMM11: MMS General Applications Base Profile — Part 1: Specification of ACSE, Presentation and Session protocols for use by MMS |
| IEC 61850-5:2013 | Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models |
| EN 61850-6:2010 | Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs |
| ISO/IEC 7498-3:1997 | Information technology — Open Systems Interconnection — Basic Reference Model: Naming and addressing |
| IEC 61850-7-2:2010 | Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) |
| IEC 61850-9-1:2003 | Communication networks and systems in substations - Part 9-1: Specific Communication Service Mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link |
| ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
| ISO 9506-2:2003 | Industrial automation systems Manufacturing Message Specification Part 2: Protocol specification |
| IEC 60874-10-3:1997 | Connectors for optical fibres and cables - Part 10-3: Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre |
| ISO/IEC 8825-1:2015 | Information technology ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) Part 1: |
| IEC TS 62351-6:2007 | Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850 |
| ISO/IEC 8823-1:1994 | Information technology Open Systems Interconnection Connection-oriented presentation protocol: Protocol specification |
| IEC 62439-3:2016 | Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) |
| ISO/IEC 8072:1996 | Information technology — Open systems interconnection — Transport service definition |
| IEC 61850-6:2009 | Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs |
| EN 61850-7-2:2010 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-2: BASIC INFORMATION AND COMMUNICATION STRUCTURE - ABSTRACT COMMUNICATION SERVICE INTERFACE (ACSI) |
| ISO/IEC 8877:1992 | Information technology Telecommunications and information exchange between systems Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T |
| ISO/IEC 8327-1:1996 | Information technology Open Systems Interconnection Connection-oriented Session protocol: Protocol specification |
| ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| IEEE 802.1Q-2014 | IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks |
| EN 61850-5:2013 | Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models |
| IEEE 802.1D-2004 | IEEE Standard for Local and metropolitan area networks: Media Access Control (MAC) Bridges |
| IEC 60874-10-1:1997 | Connectors for optical fibres and cables - Part 10-1: Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1 |
| EN 61850-7-4:2010 | Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes |
| ISO 9506-1:2003 | Industrial automation systems Manufacturing Message Specification Part 1: Service definition |
| ISO/IEC 9576-1:1995 | Information technology Open Systems Interconnection Connectionless Presentation protocol: Protocol specification Part 1: |
| IEC 61850-7-1:2011 | Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models |
| ISO/IEC 8348:2002 | Information technology Open Systems Interconnection Network service definition |
| EN 61850-7-1:2011 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-1: BASIC COMMUNICATION STRUCTURE - PRINCIPLES AND MODELS (IEC 61850-7-1:2011) |
| ISO/IEC ISP 10608-2:1992 | Information technology — International Standardized Profile TAnnnn — Connection-mode Transport Service over Connectionless-mode Network Service — Part 2: TA51 profile including subnetwork-dependent requirements for CSMA/CD Local Area Networks (LANs) |
| EN 61850-7-3:2011 | Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes |
| ISO/IEC 8473-1:1998 | Information technology Protocol for providing the connectionless-mode network service: Protocol specification Part 1: |
| IEC 60874-10-2:1997 | Connectors for optical fibres and cables - Part 10-2: Detail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1 |
| ISO/IEC 9548-1:1996 | Information technology Open Systems Interconnection Connectionless Session protocol: Protocol specification |
| IEC 61850-9-2:2011 | Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 |
| IEC 61850-7-4:2010 | Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes |
| ISO/IEC 8473-2:1996 | Information technology — Protocol for providing the connectionless-mode network service — Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork |
| IEC 61850-7-3:2010 | Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes |
| ISO/IEC 8824-1:2015 | Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation Part 1: |
| ISO/ISP 14226-2:1996 | Industrial automation systems — International Standardized Profile AMM11: MMS General Applications Base Profile — Part 2: Common MMS requirements |
| ISO/IEC 8650-1:1996 | Information technology Open Systems Interconnection Connection-oriented protocol for the Association Control Service Element: Protocol specification |
| ISO/IEC 8649:1996 | Information technology Open Systems Interconnection Service definition for the Association Control Service Element |
| ISO/ISP 14226-3:1996 | Industrial automation systems — International Standardized Profile AMM11: MMS General Applications Base Profile — Part 3: Specific MMS requirements |
| IEEE 754-2008 REDLINE | IEEE Standard for Floating-Point Arithmetic |
| ISO/IEC 8802-2:1998 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 2: Logical link control |
| ISO/IEC 8822:1994 | Information technology Open Systems Interconnection Presentation service definition |
| IEEE/IEC C37.111-2013 REDLINE | IEEE/IEC International Standard - Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems |
| EN 61850-9-2:2011 | Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 |
| IEC TS 61850-2:2003 | Communication networks and systems in substations - Part 2: Glossary |
| EN 61850-9-1:2003 | Communication networks and systems in substations - Part 9-1: Specific Communication Service Mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link |
| ISO/IEC ISP 11188-3:1996 | Information technology — International Standardized Profile — Common upper layer requirements — Part 3: Minimal OSI upper layer facilities |
| ISO/IEC 8326:1996 | Information technology Open Systems Interconnection Session service definition |
| ISO/IEC ISP 11188-1:1995 | Information technology International Standardized Profile Common upper layer requirements Part 1: Basic connection oriented requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.