I.S. EN 88528-11:2004
Current
The latest, up-to-date edition.
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
3.1 General
3.2 Performance of systems and components
3.3 Specified values
3.4 Input values
3.5 Output values
4 Symbols and abbreviations
5 Selection criteria
6 General description
6.1 Rotary UPS
6.2 Types of rotary UPS
6.2.1 Series connected rotary UPS
6.2.2 Line interactive rotary UPS
6.3 Parallel operation of a rotary UPS installation
6.3.1 General
6.3.2 Parallel operation
6.3.3 Redundant operation
6.4 Power system changeover with rotary UPS
installations (bypass)
6.5 Enclosure protection
7 Modes of operation
7.1 Power conditioning mode
7.2 Independent mode
7.3 Bypass mode
7.4 Off mode
7.5 Transitions
7.5.1 Transition 1, starting the system with
mains voltage present
7.5.2 Transition 2, start-up without mains
voltage (black start)
7.5.3 Transition 3, disconnect from grid
7.5.4 Transition 4, connect to grid
7.5.5 Transition 6, transfer
7.5.6 Transition 7, 8, retransfer
8 Service conditions
8.1 Normal service conditions
8.2 Operation at extended ambient
8.2.1 Ambient service temperature
8.2.2 Ambient storage and transportation
conditions
8.3 Engines
8.4 Rotating electrical machines
8.5 Control logic
9 Electrical service conditions and performance
9.1 General - all rotary UPS
9.2 Performance
10 Manufacturer technical declarations
10.1 General
10.2 Purchaser specification guidelines
10.2.1 Type of rotary UPS, additional features,
and system requirements
10.2.2 Rotary UPS input
10.2.3 Load to be supplied from a rotary UPS
10.2.4 Rotary UPS output
10.2.5 Battery (where applicable)
10.2.6 General application requirements and
special service conditions
10.2.7 Multi-module system configurations
10.2.8 Electromagnetic compatibility
11 Testing
11.1 Static output voltage and frequency deviations
11.2 Dynamic output voltage and frequency deviations
11.3 Input current characteristics
11.4 Measurement of filter properties
11.4.1 From mains to output
11.4.2 From output to mains
11.5 System performance
11.5.1 Efficiency
11.5.2 Stored energy times
11.5.3 Multi-module rotary UPS performance
11.6 Black start test
11.7 Environmental tests
11.8 Audible noise
11.9 Testing
12 Maintenance and product marking
12.1 Nameplate markings
12.2 Label requirements
12.3 Name plate marker
12.4 Decals - labelling
12.4.1 Safety instructions and documentation
12.5 Maintenance
Annex A (informative) Typical energy storage devices
Annex B (normative) Reference non-linear load - Single-phase
Annex C (normative) Reference non-linear load - Three-phase
Annex D (normative) Input mains failure - Test method
Annex E (informative) Types of uninterruptible power
systems (UPS) configurations
Provides criteria, including performance and test methods, for rotary uninterruptible power systems arising out of a combination of mechanical and electrical rotating machines.
DocumentType |
Standard
|
Pages |
60
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
NF EN 88528-11 : 2005 | Identical |
EN 88528-11 : 2004 | Identical |
NBN EN 88528-11 : 2005 | Identical |
IEC 88528-11:2004 | Identical |
BS EN 88528-11:2004 | Identical |
DIN EN 88528-11 : 2005 | Identical |
EN 88528-11:2004 | Identical |
IEC 60034-22:2009 | Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
ISO 8528-6:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods |
ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
EN ISO 8178-1 : 1996 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
ISO 8528-10:1998 | Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
ISO 8528-1:2005 | Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance |
ISO 3046-1:2002 | Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use |
EN 60034-22:2009 | Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.