I.S. EN ISO 12402-7:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
30-04-2021
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and components
Annex A (informative) - Mildew resistance of materials:
Soil burial method
Annex B (informative) - Abrasion resistance of cloth:
Oscillatory method (Wyzenbeek method)
Annex C (informative) - Example of a design drawing
Bibliography
Annex ZA (informative) - Relationship between this
International Standard and the
Essential Requirements of EU
Directive 89/686/EEC
Describes the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.
DocumentType |
Standard
|
Pages |
121
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
ISO 12402-7:2006 | Identical |
NBN EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
NEN EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
NS EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
SN EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
UNI EN ISO 12402-7 : 2011 | Identical |
UNE-EN ISO 12402-7:2007 | Identical |
BS EN ISO 12402-7 : 2007 | Identical |
NF EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
DIN EN ISO 12402-7:2015-08 (Draft) | Identical |
ONORM EN ISO 12402-7 : 2015 | Identical |
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 12402-5:2006 | Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements |
ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
ISO 9073-4:1997 | Textiles Test methods for nonwovens Part 4: Determination of tear resistance |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
ISO 12402-3:2006 | Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements |
ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
ISO 12402-1:2005 | Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements |
ISO 2062:2009 | Textiles Yarns from packages Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester |
ISO 12402-2:2006 | Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements |
ISO 1926:2009 | Rigid cellular plastics Determination of tensile properties |
ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
ISO 5470-2:2003 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader |
ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 7229:2015 | Rubber- or plastics-coated fabrics — Measurement of gas permeability |
ISO 12402-6:2006 | Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods |
ISO 12402-4:2006 | Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements |
ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
ISO 12402-10:2006 | Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.