I.S. EN ISO 19901-8:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS (ISO 19901-8:2014)
Available format(s)
Hardcopy , PDF
Superseded date
28-09-2023
Superseded by
Language(s)
English
Published date
01-01-2015
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols, units and abbreviated terms
5 Objectives, planning and requirements
6 Deployment of investigation equipment
7 Drilling and logging
8 In situ testing
9 Sampling
10 Laboratory testing
11 Reporting
Annex A (informative) - Objectives, planning and
requirements
Annex B (informative) - Deployment of investigation
equipment
Annex C (informative) - Drilling and logging
Annex D (informative) - In situ testing
Annex E (informative) - Sampling
Annex F (informative) - Laboratory testing
Annex G (informative) - Reporting
Bibliography
Provides requirements, and provides recommendations and guidelines for marine soil investigations regarding: a) objectives, planning and execution of marine soil investigations, b) deployment of investigation equipment, c) drilling and logging, d) in situ testing, e) sampling, f) laboratory testing, and g) reporting.
| DocumentType |
Standard
|
| Pages |
158
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 19901-8:2014 | Identical |
| EN ISO 19901-8:2015 | Identical |
| ASTM D 422 : 1963 : R2002 : EDT 1 | Standard Test Method for Particle-Size Analysis of Soils |
| ISO 17313:2004 | Soil quality Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter |
| ISO/TS 17892-2:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of density of fine-grained soil |
| ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
| ASTM D 5731 : 2016 : REDLINE | Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| ASTM D 5334 : 2014 : REDLINE | Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
| GOST 25100 : 2011 | SOILS - CLASSIFICATION |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| ISO/TS 17892-8:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test |
| ISO/TS 17892-9:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 9: Consolidated triaxial compression tests on water-saturated soils |
| BS 1377-7:1990 | Methods of test for soils for civil engineering purposes Shear strength tests (total stress) |
| ISO/TS 17892-4:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution |
| ASTM D 5550 : 2014 : REDLINE | Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
| ISO 10693:1995 | Soil quality Determination of carbonate content Volumetric method |
| ISO 14688-1:2002 | Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description |
| ISO/TS 17892-3:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 3: Determination of particle density Pycnometer method |
| IMCA S 015 : MAR 2011 | GUIDELINES FOR GNSS POSITIONING IN THE OIL & GAS INDUSTRY |
| ASTM D 4648 : 2005 | Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil |
| ASTM D 3740 : 2012-06 | PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION |
| ISO 31000:2009 | Risk management Principles and guidelines |
| IEC 61892-7:2014 | Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas |
| ASTM D 5856 : 2015 : REDLINE | Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
| ASTM D 6528 : 2017 | Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
| ISO/TS 22475-2:2006 | Geotechnical investigation and testing Sampling methods and groundwater measurements Part 2: Qualification criteria for enterprises and personnel |
| ASTM D 4373 : 2014 : REDLINE | Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ISO 22476-1:2012 | Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test |
| IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
| IMO IB117 : 2010 | INTERNATIONAL SAFETY MANAGEMENT CODE (ISM CODE) AND GUIDELINES ON IMPLEMENTATION OF THE ISM CODE |
| ISO/TS 17892-10:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests |
| ASTM D 3080 : 2004 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
| ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
| ASTM D 854 : 2014 : REDLINE | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM D 4611 : 2016 : REDLINE | Standard Test Method for Specific Heat of Rock and Soil |
| ISO/TS 17892-1:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content |
| IMO ID520 : 2011 | MARPOL CONSOLIDATED EDITION |
| ISO/TR 14685:2001 | Hydrometric determinations Geophysical logging of boreholes for hydrogeological purposes Considerations and guidelines for making measurements |
| ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
| ISO 19901-4:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
| ISO 22475-1:2006 | Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution |
| ASTM D 420 : 1998 | Guide to Site Characterization for Engineering, Design, and Construction Purposes |
| ISO 14689-1:2003 | Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description |
| BS 1377-3:1990 | Methods of test for soils for civil engineering purposes Chemical and electro-chemical tests |
| ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
| ISO 19906:2010 | Petroleum and natural gas industries Arctic offshore structures |
| ISO/TS 17892-11:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 11: Determination of permeability by constant and falling head |
| ISO 14688-2:2004 | Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification |
| ASTM D 5778 : 2012 : REDLINE | Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils |
| ASTM D 4254 : 2016 : REDLINE | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ISO/TS 17892-12:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of Atterberg limits |
| ASTM D 2974 : 2014 : REDLINE | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 5607 : 2016 : REDLINE | Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ASTM D 2850 : 2015 : REDLINE | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
| ISO/TS 17892-6:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test |
| ISO/TS 22475-3:2007 | Geotechnical investigation and testing Sampling methods and groundwater measurements Part 3: Conformity assessment of enterprises and personnel by third party |
| ASTM D 2435 : 2004 | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 10694:1995 | Soil quality — Determination of organic and total carbon after dry combustion (elementary analysis) |
| ASTM D 7181 : 2011 | Method for Consolidated Drained Triaxial Compression Test for Soils |
| NS 4737 : 1ED 1976 | WATER ANALYSIS - DETERMINATION OF SULPHIDE CONTENT OF WASTE WATER - COLORIMETRIC METHOD |
| ASTM D 7070 : 2016 : REDLINE | Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
| ISO/TS 17892-7:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 7: Unconfined compression test on fine-grained soils |
| IMO IC117 : 2014 | ISM CODE AND GUIDELINES |
| ASTM D 4253 : 2016 : REDLINE | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 3967 : 2016 : REDLINE | Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
| ASTM D 4452 : 2014 : REDLINE | Standard Practice for X-Ray Radiography of Soil Samples |
| ISO 19905-1:2016 | Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups |
| ISO 17312:2005 | Soil quality Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter |
| ASTM D 6913 : 2004 : EDT 2 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 4767 : 2011 : REDLINE | Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
| IMO I116 : 2003 | INTERNATIONAL SHIP AND PORT FACILITY SECURITY (ISPS) CODE |
| ISO/TS 17892-5:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 5: Incremental loading oedometer test |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| GOST 20522 : 2012 | SOILS - METHODS OF STATISTICAL TREATMENT OF TEST RESULTS |
| ASTM D 4542 : 2015 : REDLINE | Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.