ISO 3016:1994
|
Petroleum products Determination of pour point |
ISO 2719:2016
|
Determination of flash point Pensky-Martens closed cup method |
ISO 3993:1984
|
Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method |
EN 237:2004
|
Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
ISO 5164:2014
|
Petroleum products Determination of knock characteristics of motor fuels Research method |
ISO 8691:1994
|
Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing |
EN 41 : 1975
|
DETERMINATION OF THE SULFUR CONTENT OF PETROLEUM PRODUCTS BY THE WICKBOLD COMBUSTION METHOD |
EN 228:2012+A1:2017
|
Automotive fuels - Unleaded petrol - Requirements and test methods |
IP 364 : 1984
|
CALCULATED CETANE INDEX OF DIESEL FUELS |
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ASTM D 189 : 2006 : EDT 1
|
Standard Test Method for Conradson Carbon Residue of Petroleum Products |
ASTM D 3244 : 2016-06
|
PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS |
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
ISO 4264:2007
|
Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation |
DIN 51413-7:1990-05
|
TESTING OF LIQUID MINERAL OIL HYDROCARBONS - ANALYSIS BY GAS CHROMATOGRAPHY - DETERMINATION OF OXYGENATES AND THE OXYGEN CONTENT - PROCEDURE BY OXYGEN-SPECIFIC DETECTOR (O-FID) |
ISO 5165:1998
|
Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
EN ISO 6326-5:1997
|
Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) |
ISO 3837:1993
|
Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method |
EN ISO 6246:2017
|
Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
EN ISO 3993:1995
|
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984) |
EN 116:2015
|
Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
ISO 8178-1:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
ISO 7536:1994
|
Petroleum products — Determination of oxidation stability of gasoline — Induction period method |
ISO 3007:1999
|
Petroleum products and crude petroleum — Determination of vapour pressure — Reid method |
EN 24260:1994
|
Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987) |
ISO 8754:2003
|
Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry |
ISO 3735:1999
|
Crude petroleum and fuel oils Determination of sediment Extraction method |
ISO 4260:1987
|
Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method |
EN 238:1996/A1:2003
|
LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY |
EN 25163 : 1993
|
MOTOR AND AVIATION TYPE FUELS - DETERMINATION OF KNOCK CHARACTERISTICS - MOTOR METHOD |
ISO 10478:1994
|
Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods |
EN ISO 8178-1 : 1996
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
ISO 7941:1988
|
Commercial propane and butane Analysis by gas chromatography |
ISO 2160:1998
|
Petroleum products Corrosiveness to copper Copper strip test |
EN 12 : 1993
|
PETROLEUM PRODUCTS - DETERMINATION OF REID VAPOUR PRESSURE - WET METHOD |
EN ISO 10370:2014
|
Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014) |
ISO 8216-1:2017
|
Petroleum products Fuels (class F) classification Part 1: Categories of marine fuels |
ASTM D 86 : 2017-06
|
TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
ISO 8217:2017
|
Petroleum products Fuels (class F) Specifications of marine fuels |
EN ISO 3735:1999
|
Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
EN 589:2008+A1:2012
|
Automotive fuels - LPG - Requirements and test methods |
ISO 5163:2014
|
Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
ASTM D 4530 : 2015 : REDLINE
|
Standard Test Method for Determination of Carbon Residue (Micro Method) |
ISO 10370:2014
|
Petroleum products — Determination of carbon residue — Micro method |
ASTM D 2785 : 1980
|
Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987) |
ASTM D 2598 : 2016 : REDLINE
|
Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
ASTM D 4420 : 1994
|
Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography) |
ISO 3733:1999
|
Petroleum products and bituminous materials — Determination of water — Distillation method |
EN 27941:1993
|
Commercial propane and butane - Analysis by gas chromatography (ISO 7941:1988) |
ISO 6245:2001
|
Petroleum products — Determination of ash |
ISO 6246:2017
|
Petroleum products — Gum content of fuels — Jet evaporation method |
ISO 6296:2000
|
Petroleum products Determination of water Potentiometric Karl Fischer titration method |
ASTM D 93 : 2016-07
|
TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
EN ISO 6245:2002
|
Petroleum products - Determination of ash (ISO 6245:2001) |
EN ISO 7536 : 1996
|
Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994) |
ISO 3830:1993
|
Petroleum products Determination of lead content of gasoline Iodine monochloride method |
ISO 8973:1997
|
Liquefied petroleum gases — Calculation method for density and vapour pressure |
ASTM D 3237 : 2017 : REDLINE
|
Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
EN 23015:1994
|
Petroleum products - Determination of cloud point (ISO 3015:1992) |
ISO 4256:1996
|
Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method |
ASTM D 5186 : 2015 : REDLINE
|
TEST METHOD FOR DETERMINATION OF THE AROMATIC CONTENT AND POLYNUCLEAR AROMATIC CONTENT OF DIESEL FUELS AND AVIATION TURBINE FUELS BY SUPERCRITICAL FLUID CHROMATOGRAPHY |
EN 7 : 1974
|
DETERMINATION OF ASH FROM PETROLEUM PRODUCTS |
EN 22719 : 1993
|
PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
ISO 3405:2011
|
Petroleum products Determination of distillation characteristics at atmospheric pressure |
ISO 6326-5:1989
|
Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
ISO 7356:1985
|
Oils of thujone-containing Artemisia and oil of sage (Salvia officinalis Linnaeus) Determination of alpha- and beta-thujone content Gas chromatographic method on packed columns |
ISO 3105:1994
|
Glass capillary kinematic viscometers — Specifications and operating instructions |
EN ISO 4256:1998
|
Liquefied petroleum gases - Determination of gauge pressure - LPG method (ISO 4256:1996) |
ASTM D 2622 : 2016 : REDLINE
|
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ISO 4262:1993
|
Petroleum products Determination of carbon residue Ramsbottom method |
ASTM D 3341 : 2016 : REDLINE
|
Standard Test Method for Lead in Gasoline—Iodine Monochloride Method |
ASTM D 2274 : 2014 : REDLINE
|
Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) |
ASTM D 1744 : 2013
|
Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
EN 25164 : 1993
|
MOTOR FUELS - DETERMINATION OF KNOCK CHARACTERISTICS - RESEARCH METHOD |
ISO 3015:1992
|
Petroleum products — Determination of cloud point |
EN ISO 8754:2003
|
Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003) |
ISO 6974:1984
|
Natural gas — Determination of hydrogen, inert gases and hydrocarbons up to C8 — Gas chromatographic method |