• I.S. ETSI EN 301489-1 V1.8.1:2009

    Current The latest, up-to-date edition.

    ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  02-06-2009

    Publisher:  National Standards Authority of Ireland

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Intellectual Property Rights
    Foreword
    Introduction
    1 Scope
    2 References
      2.1 Normative references
      2.2 Informative references
    3 Definitions and abbreviations
      3.1 Definitions
      3.2 Abbreviations
    4 Test conditions
      4.1 General
      4.2 Arrangements for test signals
      4.3 RF exclusion band of radio communications equipment
      4.4 Narrow band responses of receivers or receivers which are
          part of transceivers
      4.5 Normal test modulation
    5 Performance assessment
      5.1 General
      5.2 Equipment which can provide a continuous communication link
      5.3 Equipment which does not provide a continuous communication link
      5.4 Ancillary equipment
      5.5 Equipment classification
    6 Performance criteria
      6.1 Performance criteria for continuous phenomena applied
          to transmitters and receivers
      6.2 Performance criteria for transient phenomena applied
          to transmitters and receivers
      6.3 Performance criteria for equipment which does not
          provide a continuous communication link
      6.4 Performance criteria for ancillary equipment tested
          on a stand alone basis
    7 Applicability overview tables
      7.1 EMC emission
      7.2 Immunity
    8 Methods of measurement and limits for EMC emissions
      8.1 Test configuration
      8.2 Enclosure of ancillary equipment measured on a stand
          alone basis
      8.3 DC power input/output ports
      8.4 AC mains power input/output ports
      8.5 Harmonic current emissions (AC mains input port)
      8.6 Voltage fluctuations and flicker (AC mains input port)
      8.7 Telecommunication ports
    9 Test methods and levels for immunity tests
      9.1 Test configuration
      9.2 Radio frequency electromagnetic field (80 MHz to
          1000 MHz and 1400 MHz to 2700 MHz)
      9.3 Electrostatic discharge
      9.4 Fast transients, common mode
      9.5 Radio frequency, common mode
      9.6 Transients and surges in the vehicular environment
      9.7 Voltage dips and interruptions
      9.8 Surges
    Annex A (normative): The HS Requirements and conformance Test
            specifications Table (HS-RTT)
    Annex B (normative): Technical requirements for after market
            equipment (ESAs), which are not related to immunity
            related functions of the vehicle, necessary to
            demonstrate conformance to the motor vehicle EMC
            Directive 2004/104/EC
          B.1 General
          B.2 Technical requirements for radio equipment
    Annex C (normative): Application of harmonized EMC standards to
            multi-radio and combined radio and non-radio equipment
          C.1 Where all products can operate independently of each other
          C.2 Where one or more of the individual products cannot operate
              independently
          C.3 Where none of the component parts operate independently
          C.4 Application of harmonized EMC standards to multi-radio
              equipment
    Annex D (informative): Bibliography
    Annex E (informative): The EN title in the official languages
    History

    Abstract - (Show below) - (Hide below)

    Provides the common requirements for radio communications equipment and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC).

    General Product Information - (Show below) - (Hide below)

    Committee ERM
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 61000-6-1:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    EN 55016-2-3:2017 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
    EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
    EN 55016-1-4:2010/A2:2017 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-4: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNAS AND TEST SITES FOR RADIATED DISTURBANCE MEASUREMENTS (CISPR 16-1-4:2010/A2:2017)
    EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
    EN 301 843-1 : 2.1.1 ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR MARINE RADIO EQUIPMENT AND SERVICES; HARMONISED STANDARD FOR ELECTROMAGNETIC COMPATIBILITY; PART 1: COMMON TECHNICAL REQUIREMENTS
    EN 61000-3-11 : 2000 ELECTROMAGNETIC COMPATIBILITY (EMC) PART 3-11: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS - EQUIPMENT WITH RATED CURRENT <75A AND SUBJECT TO CONDITIONAL CONNECTION
    EN 61000-3-3:2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013)
    TR 102 070-1 : 1.2.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); GUIDE TO THE APPLICATION OF HARMONIZED STANDARDS TO MULTI-RADIO AND COMBINED RADIO AND NON-RADIO EQUIPMENT; PART 1: ELECTROMAGNETIC COMPATIBILITY
    ISO 7637-2:2011 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
    TR 101 651 : 2.1.1 CLASSIFICATION OF THE ELECTROMAGNETIC ENVIRONMENT CONDITIONS FOR EQUIPMENT IN TELECOMMUNICATION NETWORKS
    2004/108/EC : 2004 DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC
    EN 61000-4-2:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
    1973/23/EEC : 1973 COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS
    EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    CISPR 25:2016 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
    EN 55022:2010/AC:2011 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008)
    EN 61000-3-2:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014)
    EN 61000-3-12:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011)
    119999/5/EC : 1999 DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 1999 ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND THE MUTUAL RECOGNITION OF THEIR CONFORMITY
    EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
    EN 61000-4-6:2014/AC:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective