Skip to content
Please enter a keyword to search
  • Preview

    ISO 7637-2:2011

    Current The latest, up-to-date edition.

    Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  01-03-2011

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 7637-2:2011 specifies test methods and procedures to ensure the compatibility to conducted electrical transients of equipment installed on passenger cars and commercial vehicles fitted with 12 V or 24 V electrical systems. It describes bench tests for both the injection and measurement of transients. It is applicable to all types of road vehicles independent of the propulsion system (e.g. spark ignition or diesel engine, electric motor).

    Function performance status classification for immunity to transients is also provided.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes SAE J 1113/42. (12/2010) Supersedes ISO/DIS 7637-2. (03/2011)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60601-1-2:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests
    10/30208924 DC : 0 BS ISO 8854 - ROAD VEHICLES - ALTERNATORS WITH REGULATORS - TESTS METHODS AND GENERAL REQUIREMENTS
    PD IEC/TR 60601-4-2:2016 Medical electrical equipment Guidance and interpretation. Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems
    BS ISO 8854:2012 Road vehicles. Alternators with regulators. Test methods and general requirements
    DIN ISO 7637-3:1999-02 ROAD VEHICLES - ELECTRICAL DISTURBANCE BY CONDUCTION AND COUPLING - PART 3: VEHICLES WITH NOMINAL 12 V OR 24 V SUPPLY VOLTAGE; ELECTRICAL TRANSIENT TRANSMISSION BY CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES
    BS ISO 14230-1:2012 Road vehicles. Diagnostic communication over K-Line (DoK-Line) Physical layer
    BS EN 16657 : 2016 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
    S.R. CEN ISO/TS 14907-1:2015 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
    BS ISO 22902-7:2006 Road vehicles. Automotive multimedia interface Physical specification
    UNE-EN 50194-2:2007 Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements
    SAE J 1113/1 : 2013 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ)
    PD CEN/TR 16152:2011 Electronic fee collection. Personalisation and mounting of first mount OBE
    11/30212434 DC : 0 BS ISO 14230-1 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER K-LINE (DOK-LINE) - PART 1: PHYSICAL LAYER
    PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
    06/30134245 DC : 0 ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT APPLICATION PROGRAMMER INTERFACE (D-PDU API)
    BS EN 62228-2:2017 Integrated circuits. EMC evaluation of transceivers LIN transceivers
    DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
    CEI EN 60601-1-2 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
    OIML R 81 : 1998 DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS
    CEI EN 50498 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR AFTERMARKET ELECTRONIC EQUIPMENT IN VEHICLES
    SAE J ISO 13766 : FEB 2003 EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
    PREN 624 : DRAFT 2009 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    OIML R 134-1 : 2006 AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
    SAE J 2954 : 2017 WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY
    ISO 7634:2007 Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures
    ISO 10483-1:2004 Road vehicles Intelligent power switches Part 1: High-side intelligent power switch
    OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
    EN 16657:2016 Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
    TS 134 124 : 13.0.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 34.124 VERSION 14.0.0 RELEASE 14)
    ISO 22900-2:2017 Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit (D-PDU API)
    I.S. EN 60601-1-2:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
    ISO 27145-6:2015 Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment
    01/714099 DC : DRAFT OCT 2001 ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS
    BS EN 45501:2015 Metrological aspects of non-automatic weighing instruments
    BS EN 13718-1:2014 Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances
    UNE-EN 12645:2015 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    BS EN 624:2011 Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
    BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
    08/30173378 DC : DRAFT AUG 2008 BS ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS
    DIN EN 230:2005-10 AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS
    EN 50502:2015 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
    EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
    EN 60601-1-2:2015 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
    EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    CEN/TR 16152:2011 Electronic fee collection - Personalisation and mounting of first mount OBE
    DEFSTAN 23-6/4(2005) : 2005 TECHNOLOGY GUIDANCE FOR MILITARY LOGISTICS VEHICLES
    DEFSTAN 23-6/3(2000) : 2000 GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT
    NF EN 301489-1 : 2012 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENTS
    BS EN 50498:2010 Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles
    10/30209944 DC : 0 BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    ANSI/AAMI/IEC 60601-1-2:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
    BS ISO 7637-3:2016 Road vehicles. Electrical disturbances from conduction and coupling Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
    EN 61851-21-1:2017/AC:2017-11 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017)
    CSA M14982 : 2000 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    TS 102 192-1 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); INTERNATIONAL TECHNICAL CHARACTERISTICS AND TEST METHODS; PART 1: WIRELESS/RADIO MICROPHONES IN THE 25 MHZ TO 3 GHZ FREQUENCY RANGE
    BS ISO 15031-4:2014 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics External test equipment
    13/30276231 DC : 0 BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    06/30134242 DC : 0 ISO 22900-1 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 1: HARDWARE DESIGN REQUIREMENTS
    CEI EN 62228-2 : 1ED 2017 INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS
    ISO 11452-7:2003 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection
    I.S. EN 50194-2:2006 ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
    BS ISO 15003:2006 Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
    I.S. EN 50436-1:2014 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    IEC 60605-3-5:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
    BS EN 50436-1:2014 Alcohol interlocks. Test methods and performance requirements Instruments for drink-driving-offender programs
    NF EN 50498 : 2011
    I.S. EN 62228-2:2017 INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS
    OIML R 80-2 : 2017 ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS
    CEI 79-51 : 2006 COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS
    BS EN 50194-2 : 2006 ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
    NF ETS 300684 : 1998
    NF ISO 14230-1 : 2002 ROAD VEHICLES - DIAGNOSTIC SYSTEMS - KEYWORD PROTOCOL 2000 - PART 1: PHYSICAL LAYER
    I.S. ETSI EN 301489-1 V1.8.1:2009 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS
    DIN EN 12645:2015-02 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    UNE-EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
    ISO 14982:1998 Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria
    I.S. EN 624:2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    I.S. EN 13309:2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    I.S. EN 12645:2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
    I.S. EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    I.S. EN ISO 14982:2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    UNI EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    CEI EN 62215-3 : 2014 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    ISO/TR 12155:1994 Commercial vehicles Obstacle detection device during reversing Requirements and tests
    BS EN 61851-21-1:2017 Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
    UNE-EN 16657:2016 Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
    BS ISO 22900-2:2017 Road vehicles. Modular vehicle communication interface (MVCI) Diagnostic protocol data unit (D-PDU API)
    DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
    BS ISO 7634:2007 Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures
    BS ISO 22900-1:2008 Road vehicles. Modular vehicle communication interface (MVCI) Hardware design requirements
    11/30219766 DC : 0 BS ISO 15031-4 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 4: EXTERNAL TEST EQUIPMENT
    ISO 15003:2006 Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions
    18/30320017 DC : 0 BS ISO 11992-1 - ROAD VEHICLES - INTERCHANGE OF DIGITAL INFORMATION ON ELECTRICAL CONNECTIONS BETWEEN TOWING AND TOWED VEHICLES - PART 1: PHYSICAL AND DATA-LINK LAYERS
    14/30310470 DC : 0 BS EN 62228-2 - INTEGRATED CIRCUITS - EMC EVALUATION OF LIN TRANSCEIVERS
    06/30157139 DC : 0
    11/30254162 DC : 0 BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    BS 6912-20:1996 Safety of earth-moving machinery Specification for operator\'s controls
    13/30252783 DC : 0 BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
    16/30320037 DC : 0 BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL
    00/706017 DC : DRAFT MAR 2000 BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES
    NF ISO 13766 : 1999 EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
    SAE J 2628 : 2013 CHARACTERIZATION, CONDUCTED IMMUNITY
    ISO 13766-1:2018 Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions
    ISO 22902-7:2006 Road vehicles Automotive multimedia interface Part 7: Physical specification
    CEI 79-17 : 2002 PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES - PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT FOR COMMERCIAL VEHICLES
    SAE J 2602/1 : 2012 LIN NETWORK FOR VEHICLE APPLICATIONS
    IEC TS 62228:2007 Integrated circuits - EMC evaluation of CAN transceivers
    I.S. EN 62215-3:2013 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD (IEC 62215-3:2013 (EQV))
    I.S. EN 50502:2015 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS
    ISO 11835:2002 Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance
    I.S. EN 61851-21-1:2017 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY
    OIML R 126 : 2012 EVIDENTIAL BREATH ANALYZERS
    CAN/CSA-Z627-16 Breath alcohol ignition interlock devices
    ISO 8854:2012 Road vehicles — Alternators with regulators — Test methods and general requirements
    ISO 26262-5:2011 Road vehicles Functional safety Part 5: Product development at the hardware level
    ISO 15031-4:2014 Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 4: External test equipment
    IEEE/ANSI C63.15-2010 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN 13718-1:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    UNE-EN 45501:2016 Metrological aspects of non-automatic weighing instruments
    04/30089279 DC : DRAFT FEB 2004 ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS
    UNE-EN 50291-2:2011 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
    UNI EN 12645 : 2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
    UNI EN 13309 : 2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
    UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
    UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
    UNI EN ISO 14982 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    I.S. EN IEC 60810:2018 LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
    ISO 21848:2005 Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads
    ISO 15763:2002 Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
    11/30227758 DC : 0 BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API)
    TR 134 926 : 13.0.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ELECTROMAGNETIC COMPATIBILITY (EMC); TABLE OF INTERNATIONAL REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TR 34.926 VERSION 14.0.0 RELEASE 14)
    12/30260709 DC : 0 BS EN 50436-1 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    16/30316578 DC : 0 BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS
    09/30179100 DC : 0 BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT: HARDWARE LEVEL
    OIML R 99-1 & 2 : 2008 INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    SAE J 1113/11 : 2017 IMMUNITY TO CONDUCTED TRANSIENTS ON POWER LEADS
    CEI 56-21 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 5: TEST CYCLE 5: GROUND MOBILE EQUIPMENT - LOW DEGREE OF SIMULATION
    SAE J 2357 : 2012 APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT
    OIML R 117-1 : 2007 DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    OIML R 21 : 2007 TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT
    IEC TR 60601-4-2:2016 Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems
    07/30134250 DC : 0 BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API)
    01/707379 DC : DRAFT APR 2001 ISO/DIS 11452-7 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 7: DIRECT RADIO FREQUENCY (RF) POWER INJECTION
    14/30261285 DC : 0 BS ISO 7637-3 - ROAD VEHICLES - ELECTRICAL DISTURBANCES FROM CONDUCTION AND COUPLING - PART 3: ELECTRICAL TRANSIENT TRANSMISSION BY CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES
    SAE J 2685 : 2014 POSITIVE TEMPERATURE COEFFICIENT OVERCURRENT PROTECTION DEVICES (PTCS)
    03/303499 DC : DRAFT FEB 2003 BS ISO 10483-1 - ROAD VEHICLES - INTELLIGENT POWER SWITCHES - PART 1: HIGH-SIDE INTELLIGENT POWER SWITCH
    NF ETS 300717 : 2000
    14/30291315 DC : 0 BS ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT (D-PDU API)
    UNE-EN 50502:2016 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
    BIS IS 12508 : 2013 ELECTRIC TACHOMETER FOR AUTOMOTIVE VEHICLES - SPECIFICATION
    PREN 50502 : DRAFT 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
    05/30127980 DC : DRAFT JAN 2005 ISO 13766 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
    BS EN 50502:2015 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
    TS 136 124 : 13.1.0 LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 36.124 VERSION 14.1.0 RELEASE 14)
    PREN 45501 : DRAFT 2011 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    I.S. EN 50498:2010
    ISO 14230-1:2012 Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer
    ISO 22900-1:2008 Road vehicles — Modular vehicle communication interface (MVCI) — Part 1: Hardware design requirements
    EN IEC 60810:2018 Lamps, light sources and led packages for road vehicles - Performance requirements
    17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    CEI EN 50291-2 : 2011 ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES INCLUDING RECREATIONAL CRAFT - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    IEEE 802.3-2012 IEEE Standard for Ethernet
    BS EN 50291-2:2010 Electrical apparatus for the detection of carbon monoxide in domestic premises Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. Additional test methods and performance requirements
    UNE-EN 50498:2011 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
    ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
    ISO 7637-3:2016 Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
    ISO 11992-1:2003 Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical and data-link layers
    IEC 61851-21-1:2017 Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply
    DIN EN 45501:2016-03 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    DIN EN ISO 14982:2009-12 Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
    16/30350012 DC : 0 BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
    IEC 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
    EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
    ISO/TS 14907-1:2015 Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures
    I.S. EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    IEC 60601-1-2:2007 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests
    BS EN 230:2005 Automatic burner control systems for oil burners
    UNE-EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
    EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
    EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
    EN 230:2005 Automatic burner control systems for oil burners
    12/30159217 DC : 0 BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
    IEEE 1725-2011 IEEE Standard for Rechargeable Batteries for Cellular Telephones
    TR 103 400 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS
    13/30268103 DC : 0 BS ISO 27145-6 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 6: EXTERNAL TEST EQUIPMENT
    ISO/TR 7637-5:2016 Road vehicles Electrical disturbances from conduction and coupling Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637
    I.S. EN 230:2005 AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    BS ISO 27145-6:2015 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements External test equipment
    BS ISO 7635:2006 Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures
    09/30201902 DC : 0 BS EN 624 - SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    BS EN 62215-3:2013 Integrated circuits. Measurement of impulse immunity Non-synchronous transient injection method
    BS ISO 26262-5:2011 Road vehicles. Functional safety Product development at the hardware level
    06/30145537 DC : 0 EN 50436-2 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 2: INSTRUMENTS FOR GENERAL PREVENTIVE USE
    07/30171041 DC : DRAFT AUG 2007 DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
    DEFSTAN 61-5(PT6)/6(2009) : 2009 NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS
    OIML R 76-1 : 2006 NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
    DD IEC/TS 62228:2007 Integrated circuits. EMC evaluation of CAN transceivers
    NF EN 300676 : 2003
    SAE J 1113/12 : 2017 ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES
    UNE-ISO 14230-1:2015 Road vehicles. Diagnostic communication over K-Line (DoK-Line). Part 1: Physical layer.
    NF ETS 300 329 : 1999
    ISO/TR 15497:2000 Road vehicles Development guidelines for vehicle based software
    NF EN 300339 : 2000
    CEI 79-56 : 2009 BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS
    ISO 13766:2006 Earth-moving machinery Electromagnetic compatibility
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    CSA C22.2 No. 60601.1.2 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
    PREN 50436-1 : DRAFT 2012 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    ISO 7635:2006 Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures
    I.S. EN 50291-2:2010 ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES INCLUDING RECREATIONAL CRAFT - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
    S.R. CEN/TR 16152:2011 ELECTRONIC FEE COLLECTION - PERSONALISATION AND MOUNTING OF FIRST MOUNT OBE
    DIN EN 624:2011-10 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
    DIN EN 13309:2010-12 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
    IEC 62228-2:2016 Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers
    BS EN ISO 14982:2009 Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
    BS ISO 21848:2005 Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads
    BS EN 13309:2010 Construction machinery. Electromagnetic compatibility of machines with internal power supply
    I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 62228-2:2017 Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers
    EN 50498:2010 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
    EN 50194-2 : 2006 AMD 1 2016 ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
    EN 50291-2:2010 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
    EN 45501 : 2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
    CEN ISO/TS 14907-1:2015 Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)
    EN 50436-1 : 2014 COR 2016 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    OVE/ONORM EN 50436-1 : 2014 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 16750-2:2012 Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads
    ISO 7637-1:2015 Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations
    ISO 21848:2005 Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads
    ISO 8854:2012 Road vehicles — Alternators with regulators — Test methods and general requirements
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective