ICC IRC International Residential Code:2021
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
2021 International Residential Code
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
29-01-2021
Publisher
Superseded date
22-10-2024
Superseded by
€120.83
Excluding VAT
The provisions of this code shall apply to the construction, alteration, movement, enlargement, replacement, repair, equipment, use and occupancy, location, removal and demolition of detached one- and two-family dwellings and townhouses not more than three stories above grade plane in height with a separate means of egress and their accessory structures not more than three stories above grade plane in height.
| DocumentType |
Standard
|
| ISBN |
978-1-60983-957-4
|
| Pages |
1108
|
| ProductNote |
THIS STANDARD ALSO REFERS TO CFR Title 16(2015),AAMA/WDMA/CSA 101/I.S2/A440—17,I.S. 11—13,ANSI WMA 100—2016,UL 815-11,TPI 1—2014,TMS 402—2016,TMS 403—2017,TMS 404—2016, TMS 602—2016,SMACNA—10,SMACNA/ANSI—2016,BCSI—2013,CFS-BCSI—2008,FS100—12,PCA 100—12,ANSI/NGWA 01-2014,NFRC 100-2017,NFRC 200-2017,NFRC 400-2017,NAIMA AH 116—09,ISO 15874—2002,ICC 900/SRCC 300—2015,ICC 901/SRCC 100—2015,IEBC—18: International Existing Building Code,IECC—18: International Energy Conservation ,Code,IECC—06: International Energy Conservation Code,IECC—09: International Energy Conservation Code,IFGC—18: International Fuel Gas Code,IPSDC—18: International Private Sewage Disposal Code,HVI 916-09,GA-253—2016,FEMA TB-2-08,FEMA TB-11—01,49 CFR, Parts 192.281(e) & 192.283 (b) (2009),DASMA 105-2016,DASMA 108-2017,DASMA 115-2016,DOC PS 1—09,DOC PS 2—10,DOC PS 20—05,CSSB—97,16 CFR, Part 1201—(2002),16 CFR, Part 1209—(2002),16 CFR, Part 1404—(2002),AAMA/WDMA/CSA 101/I.S.2/A440-2017,ANSI/CSA FC I-2014,CSA 8—93,CSA A257.1—2014,CSA A257.2—14,CSA A257.3—14,CSA B55.1-2015,CSA B55.2-2015,CSA B64.1.1-2016,B64.1.2—16,B64.1.3—16,B64.2—16,B64.2.1—16,B64.2.1.1—16,B64.2.2—16,B64.3—16,B64.4—16,B64.4.1—16,B64.5—16,B64.5.1—16,B64.6—16,B64.7—16,B137.1—16,B137.2—16,B137.3—16,B137.5—16,B137.6—16,B137.9—16,B137.10—13,B137.11—16,B137.18—13,B181.1—15,B181.2—15,B181.3—15,B182.4—15,B182.6—15,B182.8—15,ANSI A135.4—2012,ANSI A135.5—2012,ANSI A135.6-2012,ANSI A135.7—2012,CPA A208.1-2016,CISPI 301-12,CISPI310-12,AWWA C1-03,AWWA U1-16,AWC STJR—2015,ANSI/AWC WFCM—2018,ANSI/AWC NDS—2018,ANSI/AWC PWF—2015,ASSE 1011-2016,ASME BPVC—2015,ASME CSD-1—2016,ASSE 1016—2017/ASME 112.1016—2017/CSA B125.16—2017,ASSE 1070—2015/ASME A112.1070—2015/CSA B125.70—15,ASHRAE 34-2016,ASCE/SEI 32 01,ANSI/APSP/ICC 15a—2011,ANSI/A190.1-2017,ANSI/APA PRP 210—2014,ANSI/APA PRG 320—2017,ANSI/APA PRR 410—2016,ANSI/APA PRS 610.1—2013,APA E30—15,ANSI A108.1A-16,A108.1B-99,A108.4—99,A108.5—99,A108.6—99,ANSI 117—2015,A118.1—16,A118.3—13,A118.4—16,A136.1—08,NMX-J-521/2-40-ANCE—2014/CAN/CSA-22.2 No. 60335-2-40—12/UL 60335-2-40,AISI S100—16,AISI S220—15,AISI S230—15,AISI S240—15,AAMA/WDMA/CSA 101/I.S.2/A440-17,ACCA Manual D—2016,ACCA Manual J—2016,ACCA Manual S—2014.
|
| PublisherName |
International Code Council (ICC)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ICC IFC International Fire Code:2024 | International Fire Code |
| ICC 400:2022 | Standard on the Design and Construction of Log Structures |
| ICC ISPSC Code and Commentary:2024 | ISPSC® Code and Commentary |
| ASTM B 88 : 2014 | Standard Specification for Seamless Copper Water Tube |
| UL 181B:3ED 2013-01-08 | Closure Systems for Use With Flexible Air Ducts and Air Connectors |
| ASTM D 227/D227M : 2003 : R2011 : EDT 1 | Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing |
| ANSI/RESNET/ICC 301 : 2014 | STANDARD FOR THE CALCULATION AND LABELING OF THE ENERGY PERFORMANCE OF LOW-RISE RESIDENTIAL BUILDINGS USING AN ENERGY RATING INDEX |
| UL 103:11ED 2010-10-15 | Factory-Built Chimneys for Residential Type and Building Heating Appliances |
| ASTM E 96/E96M : 2015 | Standard Test Methods for Water Vapor Transmission of Materials |
| ASME A112.1.3 : 2000 : R2015 | AIR GAP FITTINGS FOR USE WITH PLUMBING FIXTURES, APPLIANCES, AND APPURTENANCES |
| ASTM F 437 : 2015 | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| UL 58:10ED 2018-01-31 | Standard for Steel Underground Tanks for Flammable and Combustible Liquids |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 259 : 2013 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
| NSF 42 : 2015 | DRINKING WATER TREATMENT UNITS - AESTHETIC EFFECTS |
| ICC IPC INTERNATIONAL PLUMBING CODE : 2018 | INTERNATIONAL PLUMBING CODE |
| NSF 50 : 2015 | EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES |
| ASTM C 5 : 2010 | Standard Specification for Quicklime for Structural Purposes |
| NFPA 1 : 2015 | FIRE CODE |
| ASTM C 14 : 2015 : REV A | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| NSF 358-2 : 2012 | POLYPROPYLENE PIPE AND FITTINGS FOR WATER-BASED GROUND-SOURCE 'GEOTHERMAL' HEAT PUMP SYSTEMS |
| ASTM C 27 : 1998 : R2013 | Standard Classification of Fireclay and High-Alumina Refractory Brick |
| ASTM C 4 : 2004 : R2014 | Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile |
| NSF 350 : 2014 | ONSITE RESIDENTIAL AND COMMERCIAL WATER REUSE TREATMENT SYSTEMS |
| NSF 41 : 2011 | NON-LIQUID SATURATED TREATMENT SYSTEMS |
| ASTM A 106/A106M : 2014 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
| NFPA 501 : 2017 | MANUFACTURED HOUSING |
| ASTM A 74 : 2015 | Standard Specification for Cast Iron Soil Pipe and Fittings |
| NSF 358-1 : 2014 | POLYETHYLENE PIPE AND FITTINGS FOR WATER-BASED GROUND-SOURCE 'GEOTHERMAL' HEAT PUMP SYSTEMS |
| ASTM D 312/D312M : 2015 | Standard Specification for Asphalt Used in Roofing |
| NSF 44 : 2015 | RESIDENTIAL CATION EXCHANGE WATER SOFTENERS |
| NSF 14 : 2015 | PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
| NSF 359 : 2011 | VALVES FOR CROSSLINKED POLYETHYLENE (PEX) WATER DISTRIBUTION TUBING SYSTEMS |
| NSF 53 : 2015 | DRINKING WATER TREATMENT UNITS - HEALTH EFFECTS |
| ASTM B 75/B75M : 2011 | Standard Specification for Seamless Copper Tube |
| ICC 600 : 2014 | Standard for Residential Construction in High-Wind Regions |
| ISO 8336:2009 | Fibre-cement flat sheets — Product specification and test methods |
| ASTM C 22/C22M : 2000 : R2015 | Standard Specification for Gypsum |
| ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
| NSF 372 : 2011 | DRINKING WATER SYSTEM COMPONENTS - LEAD CONTENT |
| ASHRAE 193 : 2010 : R2014 | METHOD OF TEST FOR DETERMINING THE AIRTIGHTNESS OF HVAC EQUIPMENT |
| ASTM A 36/A36M : 2014 | Standard Specification for Carbon Structural Steel |
| UL 181:11ED 2013-07-25 | Factory-Made Air Ducts and Air Connectors |
| ASTM A 53/A53M : 2012 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM F 409 : 2012 | Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
| UL 174:11ED 2004-04-29 | Household Electric Storage Tank Water Heaters |
| ASTM B 32 : 2008 : R2014 | Standard Specification for Solder Metal |
| ACI 332 : 2014 | RESIDENTIAL CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ICC 500 : 2014 | STANDARD FOR THE DESIGN AND CONSTRUCTION OF STORM SHELTERS |
| EN 15250:2007 | Slow heat release appliances fired by solid fuel - Requirements and test methods |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASTM E 283 : 2004 : R2012 | Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| ASTM D 226/D226M : 2009 | Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
| ANSI/RESNET/ICC 380 : 2016 | STANDARD FOR TESTING AIRTIGHTNESS OF BUILDING ENCLOSURES, AIRTIGHTNESS OF HEATING AND COOLING AIR DISTRIBUTION SYSTEMS, AND AIRFLOW OF MECHANICAL VENTILATION SYSTEMS |
| ASTM F 405 : 2005 | Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| ASTM F 439 : 2013 | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ICC 400 : 2017 | Standard on the Design and Construction of Log Structures |
| ASTM B 42 : 2015 : REV A | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM A 123/A123M : 2015 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASCE/SEI 24 14 : 2014 | FLOOD RESISTANT DESIGN AND CONSTRUCTION |
| NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
| ASTM B 101 : 2012 | Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction |
| UL 181A:4ED 2013-01-08 | Closure Systems for Use With Rigid Air Ducts |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| ASTM F 438 : 2015 | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| NFPA 275 : 2013 | STANDARD METHOD OF FIRE TESTS FOR THE EVALUATION OF THERMAL BARRIERS |
| NSF 61 : 2015 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
| FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
| NFPA 13D : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
| ASTM D 422 : 1963 : R2007 : EDT 2 | Standard Test Method for Particle-Size Analysis of Soils (Withdrawn 2016) |
| MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.