• IEC 60335-2-69:2016 RLV

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  31-12-2021

    Language(s):  English

    Published date:  14-06-2016

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General requirement
    5 General conditions for the tests
    6 Classification
    7 Marking and instructions
    8 Protection against access to live parts
    9 Starting of motor-operated appliances
    10 Power input and current
    11 Heating
    12 Void
    13 Leakage current and electric strength at
       operating temperature
    14 Transient overvoltages
    15 Moisture resistance
    16 Leakage current and electric strength
    17 Overload protection of transformers and associated
       circuits
    18 Endurance
    19 Abnormal operation
    20 Stability and mechanical hazards
    21 Mechanical strength
    22 Construction
    23 Internal wiring
    24 Components
    25 Supply connection and external flexible cords
    26 Terminals for external conductors
    27 Provision for earthing
    28 Screws and connections
    29 Clearances, creepage distances and solid insulation
    30 Resistance to heat and fire
    31 Resistance to rusting
    32 Radiation, toxicity and similar hazards
    Annexes
    Annex A (normative) - Routine tests
    Annex B (normative) - Appliances powered by rechargeable
            batteries that are recharged in the appliance
    Annex S (normative) - Battery-operated appliances powered
            by batteries that are non-rechargeable or not
            recharged in the appliance
    Annex AA (normative) - Particular requirements for vacuum
             cleaners and dust extractors for the collection
             of hazardous dusts
    Annex BB (informative) - List of dusts which present an
             explosion risk when subject to ignition conditions
    Annex CC (informative) - Particular requirements for vacuum
             cleaners and dust extractors providing equipment
             protection level Dc for the collection of
             combustible dusts
    Annex DD (normative) - Particular requirements for vacuum
             cleaners for use in ESD protected areas
    Annex EE (informative) - Emission of acoustical noise
    Annex FF (informative) - Emission of vibration
    Annex GG (normative) - Particular requirements for mobile
             wet vacuum cleaners for rescue and firefighting
             services (MWF)
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC 60335-2-69:2016 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
    IEC 60335-2-69:2016 deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments. They may be provided with a blowing or inflating function. It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system. Requirements on the safe installation of centrally-sited vacuum cleaners are not addressed by this standard but need to be taken into account. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope:
    - public use areas such as hotels, schools, hospitals;
    - industrial locations, for example factories and manufacturing shops;
    - retail outlets, for example shops and supermarkets;
    - business premises, for example offices and banks and
    - all uses other than normal housekeeping purposes. They are not equipped with a traction drive. The following power systems are covered: mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, and battery powered motors. This standard also applies to machines handling hazardous dust, such as asbestos. This standard does not apply to:
    - vacuum cleaners and water-suction cleaning appliances for household use;
    - floor treatment machines for commercial use;
    - spray extraction machines for commercial use;
    - hand-held mains-operated electrical garden blowers, vacuums and blower vacuums;
    - hand-held and transportable motor-operated electric tools;
    - appliances for medical purposes;
    - machines designed for use in corrosive environments;
    - machines designed for picking up liquids with a flash point below 55 °C and machines designed for use in explosive environments (dust, vapour or gas), except those designed for use in zone 22. This fifth edition cancels and replaces the fourth edition published in 2012. It constitutes a technical revision. The principal changes in this edition as compared with the third edition of IEC 60335-2-69 are as follows (minor changes are not listed):
    - the scope has been revised editorially to avoid misunderstandings;
    - terms and definitions has been revised with regard to the requirements revised;
    - the standard has been revised in general and updated regarding state-of-the-art, as far as necessary, in particular some changes have been made to Clauses 15, 22 and 25;
    - the standard has been aligned with the newest amendment of IEC 60335-1:2010+A1:2013;
    - Annex AA was revised and restructured;
    - Annex CC was revised;
    - general additions for vacuum cleaners with blowing functions have been introduced and a new Annex GG 'Particular requirements for mobile wet vacuum cleaners for rescue and firefighting services (MWF)' was added. It was established on the basis of the fifth edition (2010) of that standard. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a
    transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this
    publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication.
    Key words: Vacuum Cleaner, Commercial Use, Wet and Dry Vacuum Cleaner, Power Brush
    This publication is to be read in conjunction with IEC 60335-1:2010.

    General Product Information - (Show below) - (Hide below)

    Committee TC 61/SC 61J
    Development Note Stability date: 2018. (06/2016)
    Document Type Redline
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 4871:1996 Acoustics Declaration and verification of noise emission values of machinery and equipment
    IEC 61540:1997+AMD1:1998 CSV Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    IEC 61241-1-1:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    IEC 60335-2-67:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
    ISO 4225:1994 Air quality General aspects Vocabulary
    IEC 62335:2008 Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications
    IEC 60335-2-100:2002 Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
    ISO 9614-2:1996 Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning
    IEC 60335-2-72:2016 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
    IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES
    ISO 15383:2001 Protective gloves for firefighters — Laboratory test methods and performance requirements
    DIN 14811:2008-01 FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
    ISO 11428:1996 Ergonomics Visual danger signals General requirements, design and testing
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
    ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    IEC 60079-31:2013 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
    ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
    IEC 60312-1:2010+AMD1:2011 CSV Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
    DIN 54345-5:1985-07 TESTING OF TEXTILES; ELECTROSTATIC BEHAVIOUR; DETERMINATION OF ELECTRICAL RESISTANCE OF STRIPS OF TEXTILE FABRICS
    DIN 49443:1987-02 WATERTIGHT TWO-POLE PLUG WITH EARTHING CONTACT - 10 A 250 V D.C., 16 A 250 V A.C.
    IEC 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
    IEC 60335-2-68:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    ISO 6344-2:1998 Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220
    ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
    IEC 60335-2-41:2012 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective