IEC 60335-2-96:2002+AMD1:2003+AMD2:2008 CSV
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
27-05-2019
Superseded by
Language(s)
English - French
Published date
28-01-2009
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
13 Leakage current and electric strength at operating
temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated
circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annexes
Annex AA (informative) Summary of installation instructions
Bibliography
Deals with the safety of flexible sheet heating elements. These are incorporated into a building to heat rooms. The rated voltage is less than 250 V for single-phase installations and 480 V for other installations. For heated blankets and pads, see IEC 60335-2-17. For heated mats and foot warmers, see IEC 60335-2-81. This standard does not cover under-carpet heaters, nor flexible heating elements incorporated in other appliances. The contents of the corrigendum of May 2003 have been included in this copy. This consolidated version consists of the first edition (2002), its amendment 1 (2003) and its amendment 2 (2008). Therefore, no need to order amendments in addition to this publication.
| DevelopmentNote |
To be read in conjunction with IEC 60335-1. (01/2009) Stability Date: 2018. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
80
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 60335-2-96:2004 | Identical |
| GOST IEC 60335-2-96 : 2012 | Identical |
| NEN EN IEC 60335-2-96 : 2002 AMD 2 2009 | Identical |
| I.S. EN 60335-2-96:2002 | Identical |
| PN EN 60335-2-96 : 2005 AMD 2 2009 | Identical |
| SAC GB 4706-82 : 2014 | Identical |
| AS/NZS 60335.2.96:2002 | Identical |
| DIN EN 60335-2-96 : 2009 | Identical |
| VDE 0700-96 : 2009 | Identical |
| BS EN 60335-2-96 : 2002 | Identical |
| EN 60335-2-96:2002/A2:2009 | Identical |
| NF EN 60335-2-96 : 2003 AMD 2 2009 | Identical |
| I.S. HD 60364-7-753:2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-753: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - HEATING CABLES AND EMBEDDED HEATING SYSTEMS |
| 13/30277861 DC : 0 | BS EN 60335-2-111 ED 1.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-111: PARTICULAR REQUIREMENTS FOR ELECTRIC ONDOL MATTRESS WITH A NON-FLEXIBLE HEATED PART |
| BS EN 60335-2-71:2003 | Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals |
| CSA E60335.2.71 : 2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| BS EN 60335-2-106:2007 | Household and similar electrical appliances. Safety Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
| BS EN 60335-2-61 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL-STORAGE ROOM HEATERS |
| EN 62395-2:2013 | ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 2: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE (IEC 62395-2:2013) |
| CLC/TS 62395-2:2010 | Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance |
| EN 60335-2-106:2007 | Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
| CEI EN 60335-2-106 : 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR HEATED CARPETS AND FOR HEATING UNITS FOR ROOM HEATING INSTALLED UNDER REMOVABLE FLOOR COVERINGS |
| 12/30268447 DC | BS EN 60364-7-753. Low-voltage electrical installations. Requirements for special installations or locations. Heating cables and embedded heating systems |
| IEC 60335-2-71:2018 | Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals |
| IEC 62999:2016 | Electric room heating - Underfloor heating - Performance characteristics - Definitions, method of testing, sizing and formula symbols |
| S.R. CLC/TS 62395-2:2010 | ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 2: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE |
| BS EN 60335-2-30:2009 | Household and similar electrical appliances. Safety Particular requirements for room heaters |
| I.S. EN 60335-2-61:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL-STORAGE ROOM HEATERS |
| UNE-EN 50559:2013 | Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols |
| EN 60335-2-61 : 2003 AMD 2 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL-STORAGE ROOM HEATERS |
| I.S. EN 50559:2013 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| BS EN 50559 : 2015 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| CEI EN 50559 : 2014 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| 08/30195118 DC : DRAFT DEC 2008 | BS EN 60335-2-30 ED5 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS |
| CSA E60335-2-61 : 2011 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL STORAGE ROOM HEATERS |
| 11/30257158 DC : 0 | BS EN 62395-2 - ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE |
| IEC 60335-2-61:2002+AMD1:2005+AMD2:2008 CSV | Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters |
| IEC 60335-2-30:2009+AMD1:2016 CSV | Household and similar electrical appliances - Safety -Part 2-30:Particular requirements for room heaters |
| IEC 62395-2:2013 | Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance |
| IEC 60335-2-106:2007 | Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
| UNE-HD 60364-7-753:2015 | Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems |
| IEC TS 62395-2:2008 | Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance |
| EN 50559:2013 | Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols |
| DD IEC TS 62395-2 : 2008 COR 2011 | ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 2: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN 62395-2:2013 | ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 2: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN 60335-2-106:2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR HEATED CARPETS AND FOR HEATING UNITS FOR ROOM HEATING INSTALLED UNDER REMOVABLE FLOOR COVERINGS |
| BS EN 62395-2:2013 | Electrical resistance trace heating systems for industrial and commercial applications Application guide for system design, installation and maintenance |
| CSA E60335-2-61 : 2011 : R2016 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL STORAGE ROOM HEATERS |
| I.S. EN 60335-2-71:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| I.S. EN 60335-2-30:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS (IEC 60335-2-30:2009 (EQV)) |
| IEC 60364-7-753:2014 | Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems |
| IEC 60335-2-111:2015 | Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part |
| DD CLC/TS 62395-2:2010 | Electrical resistance trace heating systems for industrial and commercial applications Application guide for system design, installation and maintenance |
| EN 60335-2-71 : 2003 AMD 1 2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| HD 60364-7-753:2014/AC:2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-753: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - HEATING CABLES AND EMBEDDED HEATING SYSTEMS (IEC 60364-7-753:2014) |
| CSA E60335.2.30 : 2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60252:1993 | A.C. motor capacitors |
| IEC 60320-1:2015 | Appliance couplers for household and similar general purposes - Part 1: General requirements |
| IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
| IEC 60738-1:2006+AMD1:2009 CSV | Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV | Plugs and socket-outlets for household and similar purposes - Part1: General requirements |
| IEC 60320-2-3:1998+AMD1:2004 CSV | Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| IEC 60335-2-17:2012+AMD1:2015 CSV | Household and similar electrical appliances - Safety - Part 2-17:Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| IEC 60249-2-4:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade |
| IEC 60249-2-5:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60051-2:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters |
| IEC 61180-2:1994 | High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60364-7-701:2006 | Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower |
| IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| IEC 61643-1:2005 | Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
| IEC 60906-1:2009 | IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c. |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| IEC 60335-2-81:2015+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats |
| IEC 61180-1:1992 | High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.