IEC 60512-9-3:2011
Current
The latest, up-to-date edition.
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
22-06-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope and object
2 Normative references
3 Preparation
4 Test method
5 Details to be specified
Annex A (informative) - Typical circuit diagram
IEC 60512-9-3:2011 defines a standard test method to assess the mechanical and electrical operational endurance, i.e. engaging and separating cycles, of a connector in an operating mode which includes a specified electrical load. This second edition cancels and replaces Test 9c of IEC 60512-5, issued in 1992, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows:
- An additional requirement to 4.1 stating that if more than one electrical circuit is wired for testing, the wiring shall be carried out in a parallel electrical circuit.
- Subclauses 4.3 through 4.7 were removed and replaced by 4.2 through 4.4.
This publication is to be read in conjunction with IEC 60512-1:2001 and IEC 60512-1-100:2006.
| Committee |
TC 48/SC 48B
|
| DevelopmentNote |
To be read in conjunction with IEC 60512-1 and IEC 60512-1-100. (02/2006) Stability Date: 2017. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 60512-9-3 : 2011 | Identical |
| NEN EN IEC 60512-9-3 : 2011 | Identical |
| PN EN 60512-9-3 : 2011 | Identical |
| VDE 0687-512-9-3 : 2012 | Identical |
| DIN EN 60512-9-3 : 2012 | Identical |
| BS EN 60512-9-3:2011 | Identical |
| CEI EN 60512-9-3 : 2012 | Identical |
| EN 60512-9-3:2011 | Identical |
| UNE-EN 60512-9-3:2011 | Identical |
| I.S. EN 60512-9-3:2011 | Identical |
| UNE-EN 60512-9-3:2006 | Identical |
| SN EN 60512-9-3 : 2006 | Identical |
| NF EN 60512-9-3 : 2012 | Identical |
| CEI EN 60512-99-001 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD - TEST 99A: CONNECTORS USED IN TWISTED PAIR COMMUNICATION CABLING WITH REMOTE POWER |
| PD CLC/TR 50174-99-1:2015 | Information technology. Cabling installation Remote powering |
| 15/30327728 DC : 0 | BS EN 60512-99-002 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-002: ENDURANCE TEST SCHEDULES - TEST 99B: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD CONNECTORS |
| 17/30334978 DC : 0 | BS EN 62946-01 ED 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 01: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ AND WITH CURRENT CARRING CAPACITY UP TO 1A |
| 17/30361901 DC : 0 | BS EN 61076-3-125 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - DETAIL SPECIFICATION FOR 2-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION UP TO 600 MHZ WITH CURRENT CARRYING CAPACITY |
| S.R. CLC/TR 50174-99-1:2015 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 99-1: REMOTE POWERING |
| IEC 62946-01:2018 | Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A |
| BS EN 60512-99-001:2012 | Connectors for electronic equipment. Tests and measurements Test schedule for engaging and separating connectors under electrical load. Test 99a: Connectors used in twisted pair communication cabling with remote power |
| 09/30197932 DC : 0 | BS EN 60512-99-001 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR MATING AND UN-MATING CONNECTORS UNDER ELECTRICAL LOAD - POWER OVER THE INTERNET (PLUS) POEP, PARTICULARLY APPLICABLE TO IEC 60603-7 SERIES CONNECTORS |
| NF EN 60512-99-001 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD - TEST 99A: CONNECTORS USED IN TWISTED PAIR COMMUNICATION CABLING WITH REMOTE POWER |
| IEC 60512-99-001:2012 | Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power |
| I.S. EN 60512-99-001:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD - TEST 99A: CONNECTORS USED IN TWISTED PAIR COMMUNICATION CABLING WITH REMOTE POWER (IEC 60512-99-001:2012 (EQV)) |
| CLC/TR 50174-99-1:2015 | Information technology - Cabling installation - Part 99-1: Remote powering |
| IEC TR 62652:2010 | Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications |
| EN 60512-99-001:2012 | Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power |
| IEC 60512-3-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| IEC 60512-2-2:2003 | Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method |
| IEC 60512-1-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination |
| IEC 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| IEC 60512-2-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method |
| IEC 60512-4-1:2003 | Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof |
| IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.