![header thumbnail](/images/publishers\iec_cover.gif)
IEC 60801-2:1991
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\iec_cover.gif)
Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
01-01-1995
English - French
30-04-1991
Foreword
1. Scope and object
2. Normative reference
3. General
4. Definitions/Terminology
5. Severity levels
6. Test generator (ESD)
6.1 Characteristics and performance of the ESD generator
6.2 Verification of the characteristics of the ESD
generator
7. Test set-up
7.1 Test set-up for tests performed in laboratories
7.2 Test set-up for post-installation tests
8. Test procedure
8.1 Laboratory reference conditions
8.2 EUT exercising
8.3 Application of the static electricity discharges
9. Evaluation of the test results
Figures
1. Simplified diagram of the ESD generator
2. Typical arrangements for verification of the ESD
generator performance
3. Typical waveform of the output current of the ESD
generator
4. Discharge electrodes of the ESD generator
5. Example of test set-up for table-top equipment,
laboratory tests
6. Example of test set-up for floor-standing equipment,
laboratory tests
7. Example of test set-up for equipment, post-
installation tests
Annexes
A. (informative) - Explanatory notes
B. (normative) - Constructional details
Applies to the susceptibility of industrial-process measurement and control instrumentatiion to electrostatic discharges generated by operators touching this instrumentation and to electrostatic discharges generated between objects in the proximity of this instrumentation and establishes severity levels and the required test procedures. Establishes a common reference for evaluating the performance of industrial-processus measurement and control instrumentation when subjected to electrostatic discharges. Includes electrostatic discharges which may occur between electrostatically charged objects brought together near to the vital instrumentation.
Committee |
TC 65/SC 65A
|
DevelopmentNote |
Also numbered as BS EN 60801-2 (11/2005)
|
DocumentType |
Standard
|
Pages |
52
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
DIN EN 60801-2 : 1994 | Identical |
HD 481.2 : 200S1 | Identical |
NF EN 60801-2 : 1993 | Identical |
NBN EN 298 : 2012 | Identical |
NEN 10801-2 : 1993 | Identical |
SN EN 60801-2 : 1993 | Identical |
VDE 0843-2 : 1994 | Identical |
UNE-EN 60801-2:1996 | Identical |
CEI EN 60801-2 : 2ED 1998 | Identical |
CEI 65-6 : 1ED 1988 | Identical |
EN 60801-2 : 1993 | Identical |
NFC 46 021 : 1986 | Identical |
I.S. EN 60801-2:1993 | Identical |
BS 6667-2:1985 | Identical |
UNE 20801-2:1994 | Identical |
BS 7506-1:1995 | Methods for measurement in electrostatics Guide to basic electrostatics |
00/715261 DC : DRAFT DEC 2000 | IEC 60325 - ALPHA, BETA AND ALPHA-BETA CONTAMINATION METERS AND MONITORS |
BS 5724-2.30(1993) : 1993 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR CAPNOMETERS FOR USE WITH HUMANS |
DIN EN 60868 : 1994 | FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
BS EN 60687:1993 | Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
ISO/TR 10605:1994 | Road vehicles Electrical disturbances from electrostatic discharge |
BS 7415(1991) : 1991 AMD 7674 | SPECIFICATION FOR TIME SWITCHES FOR TARIFF AND LOAD CONTROL |
BS 6796:1986 | Specification for flickermeters |
AAMI ID26:2004 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
05/30132097 DC : DRAFT JUNE 2005 | IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
AAMI ID26 : 2004 : R2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
ASTM F 1415 : 1992 : R2000 | Standard Specification for Pulse Oximeters (Withdrawn 2005) |
NF EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
I.S. EN 60495:1994 | SINGLE SIDEBAND POWER-LINE CARRIER TERMINALS |
BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
IEC 60687:1992 | Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
EN 61265:1995 | Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes |
EN 60687:1992/corrigendum:1993 | ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S) |
EN 50091-2:1995/corrigendum Jan. 1998 | |
EN 60495:1994 | Single sideband power-line carrier terminals |
NF ETS 300 047-3 : 1998 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - BASIC ACCESS - SAFETY AND PROTECTION - PART 3: INTERFACE IA - PROTECTION |
BS 7674:1993 | Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies |
OIML R 115 : 1995 | CLINICAL ELECTRICAL THERMOMETERS WITH MAXIMUM DEVICE |
OIML R 118 : 1995 | TESTING PROCEDURES AND TEST REPORT FORMAT FOR PATTERN EVALUATION OF FUEL DISPENSERS FOR MOTOR VEHICLES |
95/541995 DC : DRAFT AUG 1995 | PREN ISO 12239 - SPECIFICATION FOR FIRE PROTECTION EQUIPMENT - SELF-CONTAINED SMOKE ALARMS |
BS 5724-2.31(1995) : 1995 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR EXTERNAL CARDIAC PACEMAKERS WITH INTERNAL POWER SOURCE |
NF ETS 300 046-5 : 1998 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - PRIMARY RATE ACCESS - SAFETY AND PROTECTION - PART 5: INTERFACE IB - PROTECTION |
DIN EN 60687 : 1994 | ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S) |
07/30162401 DC : 0 | BS EN 61207-1 - EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL |
BS EN 45502-2-3:2010 | Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems |
BS 5724-2.204(1999) : 1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
BS EN 60730-1 95 : 95 AMD 12021 | SPECIFICATION FOR AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - GENERAL REQUIREMENTS |
95/541691 DC : 0 | ISO/DIS 7240-5 - FIRE DETECTION AND ALARM SYSTEMS - POINT HEAT DETECTORS |
ISA 50.02-2 : 1992 | FIELDBUS STANDARD FOR USE IN INDUSTRIAL CONTROL SYSTEMS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION |
TS 101 272 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM) - OPTICAL ACCESS NETWORKS (OANS) FOR EVOLVING SERVICES - ATM PASSIVE OPTICAL NETWORKS (PONS) AND THE TRANSPORT OF ATM OVER DIGITAL SUBSCRIBER LINES |
CSA C22.2 No. 601.2.31 : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF EXTERNAL CARDIAC PACEMAKERS WITH INTERNAL POWER SOURCE |
OIML R 114 : 1995 | CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
ASTM F 1415 : 1992 | Standard Specification for Pulse Oximeters |
IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
VDE 0419-1 : 94 AMD 2 99 | TIME SWITCHES FOR TARIFF AND LOAD CONTROL |
VDE 0420-1 : 94 AMD 2 99 | ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL |
BS 7401(1990) : 1990 AMD 7673 | SPECIFICATION FOR ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL |
I.S. EN ISO 14815:2005 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - SYSTEM SPECIFICATIONS |
BS 7400(1991) : 1991 AMD 7672 | SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
BS EN 61252 : 1997 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
BS 5724-2.202(1997) : 1997 + A2 2009 | LUNG VENTILATORS - PART 1: PARTICULAR REQUIREMENTS FOR CRITICAL CARE VENTILATORS |
ISO 9918:1993 | Capnometers for use with humans Requirements |
DD ENV 1954:1997 | Internal and external fault behaviour of safety related electronic parts of gas appliances |
AAMI ID26 : 2004 : R2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
NF ETS 300 046-3 : 1998 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - PRIMARY RATE ACCESS - SAFETY AND PROTECTION - PART 3: INTERFACE IA - PROTECTION |
BS EN 167000:1993 | Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters |
IEC 61283:1995 | Radiation protection instrumentation - Direct reading personal dose equivalent (rate) monitors - X, gamma and high energy beta radiation |
ASTM F 1690 : 1996 : R2004 | Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013) |
BS EN ISO 11196:1997 | Anaesthetic gas monitors |
UNI CEI EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
UNI EN 794-1 : 2009 | LUNG VENTILATORS - PART 1: PARTICULAR REQUIREMENTS FOR CRITICAL CARE VENTILATORS |
NFC 46 624 : 95 XP | EIBUS BUS: A NETWORK FOR TECHNICAL AND ADMINISTRATIVE MANAGEMENT OF BUILDINGS - PHYSICAL LAYER |
05/30127272 DC : DRAFT JAN 2005 | EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
01/205932 DC : DRAFT AUG 2001 | BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING |
95/541692 DC : 0 | ISO/DIS 7240-7 - FIRE DETECTION AND ALARM SYSTEMS - SMOKE POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
ASTM B 878 : 1997 : R2003 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
96/210385 DC : 0 | CLC/BTTF 68-6 (SEC)8 - MEASUREMENT GUIDE FOR VOLTAGE CHARACTERISTICS |
SAE J 2357 : 2012 | APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT |
DIN EN 61268 : 1996 | ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3) |
BS EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
BS EN 50091-2:1996 | Specification for uninterruptible power systems (UPS) EMC requirements |
CSA Z9918 : 0 | CAPNOMETERS FOR USE WITH HUMANS - REQUIREMENTS |
CSA E730.1-2E : 95(R2000) | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
ASTM B 878 : 1997 : R2009 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
CEI EN 61265 : 1996 | ELECTROACOUSTICS - INSTRUMENTS FOR MEASUREMENT OF AIRCRAFT NOISE - PERFORMANCE REQUIREMENTS FOR SYSTEMS TO MEASURE ONE-THIRD-OCTAVE BAND SOUND PRESSURE LEVELS IN NOISE CERTIFICATION OF TRANSPORT-CATEGORY AEROPLANES |
ASTM F 1690 : 1996 | Standard Specification for Humidifiers for Medical Use-Part 1 General Requirements for Active Humidification Systems |
EN 54-4:1997/A2:2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT |
IEC 60495:1993 | Single sideband power-line carrier terminals |
BS EN 864:1997 | Medical electrical equipment. Capnometers for use with humans. Particular requirements |
ISO 14815:2005 | Road transport and traffic telematics — Automatic vehicle and equipment identification — System specifications |
IEC 61268:1995 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
IEC 61252:1993+AMD1:2000+AMD2:2017 CSV | Electroacoustics - Specifications for personal sound exposure meters |
BS EN 740:1999 | Anaesthetic workstations and their modules. Particular requirements |
UNE-EN 45502-2-3:2010 | Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
EN 61252:1995/A2:2017 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS (IEC 61252:1993/A2:2017) |
EN 864 : 1996 | MEDICAL ELECTRICAL EQUIPMENT - CAPNOMETERS FOR USE WITH HUMANS - PARTICULAR REQUIREMENTS |
EN ISO 14815:2005 | Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications (ISO 14815:2005) |
EN 45502-2-3:2010 | Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
EN 865 : 1997 | PULSE OXIMETERS - PARTICULAR REQUIREMENTS |
EN 794-1:1997+A2:2009 | Lung ventilators - Part 1: Particular requirements for critical care ventilators |
BS 5724-2.124(1998) : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
DIN EN 61038 : 1994 AMD 2 1999 | TIME SWITCHES FOR TARIFF AND LOAD CONTROL |
00/122334 DC : DRAFT JUNE 2000 | BS EN 13917-2 - WATER METERS WITHIN THE SCOPE OF DIRECTIVES 75/33/EEC AND 79/830/EEC, EQUIPPED WITH ELECTRONIC TOTALISING DEVICES - PART 2: PATTERN APPROVAL TESTS |
ASTM B 878 : 1997 : R2014 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
93/711458 DC : DRAFT JUL 1993 | |
DIN EN 61037 : 1994 AMD 2 1999 | ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL |
CSA ISO 11196 : 0 | ANAESTHETIC GAS MONITORS |
I.S. EN 61252:1996 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
ASTM B 878 : 1997 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
I.S. EN 45502-2-3:2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
GR 1089 ILR : ISSUE 1B | ELECTROMAGNETIC COMPATIBILITY AND ELECTRICAL SAFETY GENERIC CRITERIA FOR NETWORK TELECOMMUNICATIONS EQUIPMENT ISSUES LIST REPORT |
I.S. EN 61265:1998 | ELECTROACOUSTICS - INSTRUMENTS FOR MEASUREMENT OF AIRCRAFT NOISE - PERFORMANCE REQUIREMENTS FOR SYSTEMS TO MEASURE ONE-THIRD-OCTAVE BAND SOUND PRESSURE LEVELS IN NOISE CERTIFICATION OF TRANSPORT-CATEGORY AEROPLANES |
BS EN 54-4:1998 | Fire detection and fire alarm systems Power supply equipment |
BS EN 865:1997 | Pulse oximeters. Particular requirements |
BS EN ISO 14815:2005 | Road transport and traffic telematics. Automatic vehicle and equipment identification. System specifications |
EN ISO 11196 : 1997 | ANAESTHETIC GAS MONITORS |
EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
BS 6402(1994) : 1994 AMD 9323 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.