IEC 61143-1:1992+AMD1:1997 CSV
Current
The latest, up-to-date edition.
Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
23-01-1998
Foreword
Clause
1 Scope
2 Normative references
3 Definitions
3.1 General terms
3.2 Description of recorders according to their
methods of operation
3.3 Construction features of recorders
3.4 Characteristic features of recorders
3.5 Characteristic values
3.6 Influence quantities, reference conditions,
nominal range of use and preconditioning
3.7 Errors and variations
3.8 Accuracy, accuracy class, class index
4 Description, classification and compliance
4.1 Description
4.2 Classification
4.3 Compliance with the requirements of this part
5 Reference conditions and intrinsic errors
5.1 Reference conditions
5.2 Fiducial value and limits of intrinsic errors
5.3 Span
5.4 Dead band
5.5 Additional error due to zero displacement use
6 Nominal range of use and variations
6.1 Nominal range of use
6.2 Limits of variations
6.3 Conditions for the determination of variations
6.4 Variation in timekeeping
6.5 Variation due to parasitic input quantities
7 Further electrical and mechanical requirements
7.1 Dynamic performance
7.2 Continuous use
7.3 Permissible overloads
7.4 Limiting values of temperature
8 Constructional requirements
8.1 Sealing to prevent access
8.2 Scales and charts
8.3 Preferred values
8.4 Vibration and shock
9 Information, markings and symbols
9.1 Information on the recorder
9.2 Information in documentation
9.3 Information relating to reference conditions and
nominal ranges of use
10 Markings and symbols for terminals
10.1 Requirements for markings
10.2 Earthing (grounding) terminals
10.3 Measuring circuit terminals
11 Tests to prove compliance with this part
11.1 Performance
Annex A Determination of the influence of parasitic input
quantities
Applies to X-t recorders used for the measurement of voltage and current which measure and record analogue electrical quantities as a function of time. Also applies to non-interchangeable accessories and accessories of limited interchangeability (e.g. shunts, impedance-elements) if they are used with the recorder and the adjustments have been made for the combination. IEC 61143-1 and IEC 61143-2 cancel and replace IEC 60484 (1974). This consolidated version consists of the first edition (1992) and its amendment 1 (1997). Therefore, no need to order amendment in addition to this publication.
DevelopmentNote |
Supersedes IEC 60484 (03/2001) Stability Date: 2017. (10/2012)
|
DocumentType |
Standard
|
Pages |
57
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Standards | Relationship |
NF EN 61143-1 : 94 AMD 1 98 | Identical |
NEN 11143-1 : 1994 | Identical |
NEN EN IEC 61143-1 : 1994 AMD 1 1998 | Identical |
I.S. EN 61143-1:1995 | Identical |
PN EN 61143-1 : 2002 | Identical |
SAC GB/T 17860.1 : 1999 | Identical |
SN EN 61143-1 : 1994 AMD 1 1997 | Identical |
UNE-EN 61143-1:1997 | Identical |
BS EN 61143-1:1994 | Identical |
BS 7610-1(1992) : 1992 AMD 8388 | Identical |
EN 61143-1:1994/A1:1997 | Identical |
DIN EN 61143-1:1995-01 | Identical |
DIN EN 61143-2:1995-01 | ELECTRICAL MEASURING INSTRUMENTS - X-T RECORDERS - PART 2: RECOMMENDED ADDITIONAL TEST METHODS |
03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
IEC 60051-6:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters |
IEC 60160:1963 | Standard atmospheric conditions for test purposes |
IEC 60051-1:2016 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 60051-7:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7: Special requirements for multi-function instruments |
IEC 60051-4:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4: Special requirements for frequency meters |
IEC 60051-8:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8: Special requirements for accessories |
IEC 60051-9:1988 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9: Recommended test methods |
IEC 60051-2:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters |
IEC 60051-5:1985 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes |
IEC 60617-2:1996 | Graphical symbols for diagrams - Partie 2: Symbol elements, qualifying symbols and other symbols having general application |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.