IEC 61672-3:2013
Current
Current
The latest, up-to-date edition.
Electroacoustics - Sound level meters - Part 3: Periodic tests
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, Spanish, Castilian
Published date
30-09-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.IEC 61672-3:2013 describes procedures for periodic testing of time-weighting, integrating-averaging, and integrating sound level meters that were designed to conform to the class 1 or class 2 specifications of the second edition of IEC 61672-1. The aim of the standard is to ensure that periodic testing is performed in a consistent manner by all laboratories. The purpose of periodic testing is to assure the user that the performance of a sound level meter conforms to the applicable specifications of IEC 61672-1 for a limited set of key tests and for the environmental conditions under which the tests were performed. Periodic tests described in this edition of IEC 61672-3 apply to sound level meters for which the manufacturer claims conformance to the specifications of the second edition of IEC 61672-1. Periodic tests described in IEC 61672-3 apply to sound level meters for which the model has been, or has not been, pattern approved by an independent testing organization responsible for pattern approvals in accordance with the test procedures of the second edition of IEC61672-2. This second edition cancels and replaces the first edition published in 2006. This second edition constitutes a technical revision. The main changes with regard to the previous concern conformance to specifications which is now demonstrated when measured deviations from design goals do not exceed the applicable acceptance limits, and when the uncertainty of measurement does not exceed the corresponding maximum-permitted uncertainty, with both uncertainties determined for a coverage probability of 95 %. In this document, references to IEC 61672-1, IEC 61672-2, and IEC 61672-3 refer to the second editions unless stated otherwise. Procedures for the periodic testing of sound level meters designed to conform to the specifications of IEC 61672-1:2002 were given in IEC 61672-3:2006.
| Committee |
TC 29
|
| DevelopmentNote |
Also numbered as ANSI S1.4-3. (09/2014) Stability date: 2019 (11/2017)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 61672-3:2009 | Identical |
| NF EN 61672-3 : 2014 | Identical |
| NBN EN 61672-3 : 2014 | Identical |
| NEN EN IEC 61672-3 : 2014 | Identical |
| I.S. EN 61672-3:2013 | Identical |
| PN EN 61672-3 : 2014 | Identical |
| AS/NZS IEC 61672.3:2019 | Identical |
| BS EN 61672-3:2013 | Identical |
| CEI EN 61672-3 : 2014 | Identical |
| EN 61672-3:2013 | Identical |
| DIN EN 61672-3:2017-05 | Identical |
| JIS C 1509-3:2019 | Identical |
| UNE-EN 61672-3:2014 | Identical |
| EEMUA 140 : 2014 | NOISE PROCEDURE SPECIFICATION |
| ISO 20906:2009 | Acoustics Unattended monitoring of aircraft sound in the vicinity of airports |
| ANSI/ASA S12.72 : 2015 | PROCEDURE FOR MEASURING THE AMBIENT NOISE LEVEL IN A ROOM |
| I.S. EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010) |
| ASTM E 3091 : 2017 | Standard Specification for Systems to Measure Sound Levels |
| EN 62585 : 2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012) |
| 13/30269186 DC : 0 | BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION |
| BS EN ISO 16283-3:2016 | Acoustics. Field measurement of sound insulation in buildings and of building elements Façade sound insulation |
| 15/30263133 DC : 0 | BS ISO 14878 - CYCLES - AUDIO WARNING DEVICES - TECHNICAL SPECIFICATION AND TEST METHODS |
| DIN EN ISO 16283-3:2016-09 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016) |
| 17/30362053 DC : DRAFT SEP 2017 | BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION |
| BS EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
| UNE-EN ISO 16283-3:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016) |
| I.S. EN ISO 16283-1:2014 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 16283-1:2014) |
| 07/30135701 DC : 0 | BS IEC 61996-1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 62585:2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012 (EQV)) |
| BS ISO 20906 : 2009 | ACOUSTICS - UNATTENDED MONITORING OF AIRCRAFT SOUND IN THE VICINITY OF AIRPORTS |
| UNE-EN ISO 16283-2:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015) |
| ASTM E 336 : 2017-11 | TEST METHOD FOR MEASUREMENT OF AIRBORNE SOUND ATTENUATION BETWEEN ROOMS IN BUILDINGS |
| I.S. EN ISO 6926:2016 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016) |
| EN ISO 6926:2016 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| DIN EN ISO 10140-5 E : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010 + AMD.1:2014) |
| 10/30205316 DC : 0 | BS EN 61400-11 - WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| IEEE 656-1992 | IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines |
| SAE J2521_201304 | Disc and Drum Brake Dynamometer Squeal Noise Test Procedure |
| I.S. EN ISO 16283-3:2016 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016) |
| EN ISO 10848-1:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) |
| BS EN ISO 16283-1 : 2014 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION |
| UNE-EN ISO 16283-1:2015 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 16283-1:2014) |
| DIN EN ISO 6926:2016-08 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| ISO 6926:2016 | Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| UNE-EN ISO 6926:2016 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| BS ISO 14878:2015 | Cycles. Audible warning devices. Technical specification and test methods |
| 07/30164074 DC : 0 | BS ISO 13472-2 - ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION PROPERTIES OF ROAD SURFACES IN SITU - PART 2: SPOT METHOD FOR REFLECTIVE SURFACES |
| 14/30280503 DC : 0 | BS ISO 16900-14 - RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 14: MEASUREMENT OF SOUND LEVEL |
| BS ISO 362-3:2016 | Measurement of noise emitted by accelerating road vehicles. Engineering method Indoor testing M and N categories |
| ANSI S12-5:2006 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| 08/30087659 DC : 0 | ISO 10140-5 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
| ANSI S12-5 : 2006 : R2011 | ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS |
| I.S. EN ISO 16283-2:2015 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO/DIS 16283-2:2013) |
| SAE J1970_201802 | Shoreline Sound Level Measurement Procedure for Recreational Motorboats |
| BS EN ISO 10848-1:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Frame document |
| EN ISO 16283-2:2015 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015) |
| UNI ISO 20906 : 2012 | ACOUSTICS - UNATTENDED MONITORING OF AIRCRAFT SOUND IN THE VICINITY OF AIRPORTS |
| ISO 1996-2:2017 | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels |
| 13/30273886 DC : 0 | BS EN 16518 - RESILIENT FLOOR COVERINGS - MEASUREMENT OF IN-ROOM IMPACT NOISE |
| DIN EN ISO 16283-2:2016-05 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO 16283-2:2015) |
| ISO 10848-1:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document |
| ISO 16283-2:2015 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation |
| BS EN ISO 6926:2016 | Acoustics. Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| IEC 62585:2012 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| ISO 16283-3:2016 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation |
| UNE-EN ISO 10140-5:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010) |
| EN ISO 16283-3:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016) |
| 14/30295928 DC : 0 | BS EN ISO 16283-3 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FACADE SOUND INSULATION |
| BS EN ISO 16283-2:2015 | Acoustics. Field measurement of sound insulation in buildings and of building elements Impact sound insulation |
| BS EN 62585:2012 | Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter |
| CEI EN 62585 : 2013 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER |
| 10/30194376 DC : 0 | BS EN 62585 ED.1 - ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN FREE-FIELD RESPONSE OF A SOUND LEVEL METER |
| 12/30250454 DC : 0 | BS ISO 16283-1 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION |
| UNI EN ISO 10140-5 : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
| UNE-EN 62585:2013 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| ISO 14878:2015 | Cycles Audible warning devices Technical specification and test methods |
| ISO 362-3:2016 | Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories |
| ISO 16283-1:2014 | Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| I.S. EN ISO 10848-1:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 1: FRAME DOCUMENT (ISO 10848-1:2017) |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| DIN EN ISO 10140-5:2014-09 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010 + Amd.1:2014) (includes Amendment A1:2014) |
| ASTM E 336 : 2020 | Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings |
| SAE J994_202306 | Alarm - Backup - Electric Laboratory Performance Testing |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| IEC 61094-5:2016 | Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison |
| IEC 61183:1994 | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| IEC 61094-6:2004 | Measurement microphones - Part 6: Electrostatic actuators for determination of frequency response |
| IEC 62585:2012 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.