IEC 61800-9-2:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
20-10-2023
English - French
03-03-2017
IEC 61800-9-2:2017 specifies energy efficiency indicators of power electronics (complete drive modules, CDM), power drive systems (PDS) and motor starters, all used for motor driven equipment. It specifies the methodology for the determination of losses of the complete drive module (CDM), the power drive system (PDS) and the motor system.
It defines IE and IES-classes, their limit values and provides test procedures for the classification of the overall losses of the motor system.
Furthermore, this document proposes a methodology for the implementation of the best energy efficiency solution of drive systems.
This depends on the architecture of the motor driven system, on the speed/load profile and on the operating points over time of the driven equipment.
Committee |
TC 22/SC 22G
|
DevelopmentNote |
Stability Date: 2018. (03/2017)
|
DocumentType |
Standard
|
Pages |
226
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NEMA IEC 61800-9-2:2023 | Identical |
PN EN 61800-9-2 : 2017 | Identical |
EN 61800-9-2:2017 | Identical |
NEN EN IEC 61800-9-2 : 2017 | Identical |
DIN EN 61800-9-2 : 2018-01 | Identical |
VDE 0160-109-2 : 2018-01 | Identical |
PNE-FprEN 61800-9-2 | Identical |
CEI EN 61800-9-2 : 1ED 2017 | Identical |
UNE-EN 61800-9-2:2017 | Identical |
BS EN 61800-9-2:2017 | Identical |
BS EN 61800-9-1:2017 | Adjustable speed electrical power drive systems Ecodesign for power drive systems, motor starters, power electronics and their driven applications. General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) |
18/30338601 DC : 0 | HD 60364-8-1 ED 2.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 8-1: ENERGY EFFICIENCY |
17/30347395 DC : 0 | BS EN 60034-2-3 - ROTATING ELECTRICAL MACHINES - PART 2-3: SPECIFIC TEST METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF CONVERTER-FED AC MOTOR |
PD IEC GUIDE 118:2017 | Inclusion of energy efficiency aspects in electrotechnical publications |
VDE 0160-109-2 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS (IEC 61800-9-2:2017) |
I.S. EN 61800-9-1:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-1: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA) AND SEMI ANALYTIC MODEL (SAM) |
DIN EN 61800-9-1 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-1: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA) AND SEMI ANALYTIC MODEL (SAM) (IEC 61800-9-1:2017) |
PD IEC/TS 60034-30-2:2016 | Rotating electrical machines Efficiency classes of variable speed AC motors (IE-code) |
CEI EN 61800-9-1 : 1ED 2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-1: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA) AND SEMI ANALYTIC MODEL (SAM) |
VDE 0160-109-1 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-1: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA) AND SEMI ANALYTIC MODEL (SAM) |
IEC 61800-9-1:2017 | Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) |
IEC GUIDE 118:2017 | Inclusion of energy efficiency aspects in electrotechnical publications |
EN 61800-9-1:2017 | Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) |
16/30342852 DC : 0 | BS EN 17038-1 - PUMPS - METHODS OF QUALIFICATION AND VERIFICATION OF THE ENERGY EFFICIENCY INDEX FOR ROTODYNAMIC PUMPS UNITS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) |
DIN EN 61800-9-2 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS (IEC 61800-9-2:2017) |
15/30314544 DC : 0 | BS EN 61800-9-1 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-1: ENERGY EFFICIENCY OF POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - GENERAL REQUIREMENTS FOR SETTING ENERGY EFFICIENCY STANDARDS FOR POWER DRIVEN EQUIPMENT USING THE EXTENDED PRODUCT APPROACH (EPA) AND SEMI ANALYTIC MODEL (SAM) |
IEC 61800-3:2017 | Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
IEC 60038:2009 | IEC standard voltages |
IEC 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
IEC TS 62578:2015 | Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz |
IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
IEC 61000-3-12:2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
IEC TS 60034-31:2010 | Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide |
IEC 60072-1:1991 | Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 |
IEC TS 61800-8:2010 | Adjustable speed electrical power drive systems - Part 8: Specification of voltage on the power interface |
IEC 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
IEC TS 60034-25:2014 | Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide |
IEC 60947-4-2:2011 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
IEC TS 60034-2-3:2013 | Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC induction motors |
EN 50598-2:2014/A1:2016 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
IEC 61800-9-1:2017 | Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) |
IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.