ISO 10434:2004
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
26-08-2020
Superseded by
Language(s)
English, French
Published date
16-07-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 10434:2004 specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would indicate a need for full port openings, heavy wall sections and large stem diameters. It sets forth the requirements for the following gate valve features: bolted bonnet; outside screw and yoke; rising stems; nonrising handwheels; single or double gate; wedge or parallel seating; metallic seating surfaces; flanged or butt-welding ends. It covers valves of the nominal sizes DN 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500 and 600, corresponding to nominal pipe sizes NPS 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18, 20 and 24. It is applicable to pressure Class designations 150, 300, 600, 900, 1500 and 2500.
| DevelopmentNote |
Supersedes ISO/DIS 10434 (07/2004)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 10434 : 2005 | Identical |
| NF EN ISO 10434 : 2004 | Identical |
| NBN EN ISO 10434 : 2004 | Identical |
| NEN EN ISO 10434 : 2004 | Identical |
| NS EN ISO 10434 : 1ED 2004 | Identical |
| I.S. EN ISO 10434:2004 | Identical |
| PN EN ISO 10434 : 2005 | Identical |
| SN EN ISO 10434 : 2004 | Identical |
| UNI EN ISO 10434 : 2004 | Identical |
| UNE-EN ISO 10434:2005 | Identical |
| BS EN ISO 10434:2004 | Identical |
| EN ISO 10434:2004 | Identical |
| DIN EN ISO 10434:2005-01 | Identical |
| NS ISO 10437 : 1ED 2000 | Identical |
| NS ISO 10434 : 1ED 2000 | Identical |
| DIN EN ISO 28921-1:2017-05 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| UNE-EN ISO 28921-2:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015) |
| BS ISO 21011:2008 | Cryogenic vessels. Valves for cryogenic service |
| ISO 21011:2008 | Cryogenic vessels — Valves for cryogenic service |
| 03/118014 DC : DRAFT DEC 2003 | ISO 7121 - METAL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
| CSA Z662.1 : 2013 | COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS |
| I.S. EN ISO 28921-1:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
| EN ISO 28921-2:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015) |
| EN ISO 28921-1:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| NBR 15827 : 2014 | INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| 11/30246933 DC : 0 | BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| BS EN ISO 28921-1:2017 | Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing |
| 14/30293296 DC : 0 | BS ISO 28921-2 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING |
| BS ISO 28921-1 : 2013 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
| BS EN ISO 28921-2:2017 | Industrial valves. Isolating valves for low-temperature applications Type testing |
| I.S. EN ISO 28921-2:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING (ISO 28921-2:2015) |
| DIN EN ISO 17292:2016-05 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| I.S. EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| I.S. EN ISO 10438-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 10438-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
| 07/30144848 DC : 0 | ISO 5208 - INDUSTRIAL VALVES - PRESSURE TESTING OF METALLIC VALVES |
| API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
| EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
| I.S. EN ISO 15761:2003 | STEEL GATE, GLOBE AND CHECK VALVES FOR SIZES DN 100 AND SMALLER, FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| 02/705734 DC : DRAFT MAY 2002 | EN ISO 17292 - METAL BALL VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| BS ISO 28921-2 : 2015 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING |
| DIN EN ISO 28921-2:2017-05 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING (ISO 28921-2:2015) |
| UNE-EN ISO 17292:2016 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| BS EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| ISO 28921-1:2013 | Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing |
| ISO 28921-2:2015 | Industrial valves Isolating valves for low-temperature applications Part 2: Type testing |
| BS EN ISO 13703 : 2001 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
| BS EN ISO 10438-1:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
| BS EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ISO 13703:2000 | Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms |
| EN ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| 14/30299749 DC : 0 | BS EN ISO 17292 - METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| UNE-EN ISO 28921-1:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
| API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ASME B1.12 : 1987 | CLASS 5 INTERFERENCE-FIT THREAD |
| ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| ASME B36.10 : 1979 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ISO 5209:1977 | General purpose industrial valves Marking |
| ISO 6002:1992 | Bolted bonnet steel gate valves |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 5752:1982 | Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| MSS SP 102 : 1989 | MULTI-TURN VALVE ACTUATOR ATTACHMENT - FLANGE AND DRIVING COMPONENT DIMENSIONS AND PERFORMANCE CHARACTERISTICS |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| NFM 87 412 : 1986 | INDUSTRIE DU PETROLE - ROBINETTERIE EN ACIER FORGE - SPECIFICATIONS |
| ASME B16.25 : 2012 | BUTTWELDING ENDS |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.