ISO 11119-3:2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-12-2020
Superseded by
Language(s)
English
Published date
17-04-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
The cylinders and tubes in ISO 11119-3:2013 are
- Type 4 Fully Wrapped Cylinders or Tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends, and
- Type 5 Fully Wrapped Cylinders or Tubes without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.
The cylinders are constructed
- in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement, and
- in the form of two filament wound shells joined together.
Cylinders and tubes manufactured and tested to ISO 11119-3:2013 are not intended to contain toxic, oxidizing or corrosive gases.
ISO 11119-3:2013 is limited to cylinders and tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.
Cylinders and tubes manufactured and tested to ISO 11119-3:2013 have a minimum design life of 15 years.
ISO 11119-3:2013 does not address the design, fitting and performance of removable protective sleeves.
| DevelopmentNote |
Supersedes ISO/DIS 11119-3. (04/2013)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 11119-3 : 2013 | Identical |
| UNI ISO 11119-3 : 2017 | Identical |
| DIN EN 16716:2015-08 (Draft) | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN ISO 11623:2015 | Gas cylinders. Composite construction. Periodic inspection and testing |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| I.S. EN ISO 11623:2015 | GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO 11623:2015, CORRECTED VERSION 2017-02) |
| 17/30341479 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
| 15/30324466 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| PD ISO/TR 19811:2017 | Gas cylinders. Service life testing for cylinders and tubes of composite construction |
| BS EN ISO 24431:2016 | Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling |
| UNE-EN 16716:2017 | Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods |
| BS EN 16716:2017 | Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods |
| 08/30149718 DC : DRAFT JULY 2008 | BS EN ISO 13341 - TRANSPORTABLE GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS |
| ISO 16923:2016 | Natural gas fuelling stations — CNG stations for fuelling vehicles |
| SAE AS 6858 : 2017 | INSTALLATION OF FUEL CELL SYSTEMS IN LARGE CIVIL AIRCRAFT |
| UNE-EN ISO 13341:2011 | Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2010) |
| BS EN ISO 13341 : 2010 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS |
| I.S. EN ISO 13341:2010 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:2010) |
| UNE-EN ISO 24431:2017 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
| BS EN ISO 16923:2018 | Natural gas fuelling stations. CNG stations for fuelling vehicles |
| ISO/TR 19811:2017 | Gas cylinders Service life testing for cylinders and tubes of composite construction |
| EN ISO 24431:2016 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
| 14/30288142 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS ISO 16964:2015 | Gas cylinders. Flexible hoses assemblies. Specification and testing |
| ISO 16964:2015 | Gas cylinders Flexible hoses assemblies Specification and testing |
| ISO 24431:2016 | Gas cylinders Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| EN ISO 16923:2018 | Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) |
| EN 16716:2017 | Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods |
| EN ISO 11623:2015 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
| BS ISO 16923 : 2016 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
| ISO/TR 13086-2:2017 | Gas cylinders Guidance for design of composite cylinders Part 2: Bonfire test issues |
| I.S. EN 16716:2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 24431:2016 | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
| I.S. EN ISO 16923:2018 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016) |
| DIN EN ISO 24431:2015-08 (Draft) | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
| DIN EN ISO 13341:2015-11 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:2010 + AMD 1:2015) |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| UNE-EN ISO 11623:2016 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
| DIN EN 16716:2017-05 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| ASME STP-PT-005 : 2006 | DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| AS 2337.3:2020 | Gas cylinder test stations Transportable gas cylinders - Periodic inspection and testing of composite cylinders (ISO 11623:2015, MOD) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| CGA C 14 : 2005(R2010) | PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| EN 720-2 : 1996 | TRANSPORTABLE GAS CYLINDERS - GASES AND GAS MIXTURES - PART 2: DETERMINATION OF FLAMMABILITY AND OXIDIZING ABILITY OF GASES AND GAS MIXTURES |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 3341:2000 | Textile glass Yarns Determination of breaking force and breaking elongation |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| CGA C 6.2 : 2013 | STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 10618:2004 | Carbon fibre — Determination of tensile properties of resin-impregnated yarn |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
| EN 962:1996/A2:2000 | TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS |
| ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| EN 3-1 : 1996 | PORTABLE FIRE EXTINGUISHERS - PART 1: DESCRIPTION, DURATION OF OPERATION, CLASS A AND B FIRE TEST |
| ASTM D 2290 : 2016-12 | TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTIC OR REINFORCED PLASTIC PIPE |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| EN 12257:2002 | Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| ISO 13769:2007 | Gas cylinders Stamp marking |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.