IEC 61025:2006
|
Fault tree analysis (FTA) |
ISO/TR 15916:2015
|
Basic considerations for the safety of hydrogen systems |
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV
|
Information technology equipment - Safety - Part 1: General requirements |
ISO 15500-3:2012
|
Road vehicles Compressed natural gas (CNG) fuel system components Part 3: Check valve |
ISO 12499:1999
|
Industrial fans Mechanical safety of fans Guarding |
IEC 60335-2-30:2009+AMD1:2016 CSV
|
Household and similar electrical appliances - Safety -Part 2-30:Particular requirements for room heaters |
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
ISO 15649:2001
|
Petroleum and natural gas industries — Piping |
IEC 60947-6-2:2002+AMD1:2007 CSV
|
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
IEC 60364-4-43:2008
|
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
IEC 60068-2-18:2017
|
Environmental testing - Part 2-18: Tests - Test R and guidance: Water |
ANSI Z21.21 : 2015
|
AUTOMATIC VALVES FOR GAS APPLIANCES |
IEC 60947-7-2:2009
|
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |
CSA 2.6 : 2016
|
GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
ISO 11119-2:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
ISO 11114-1:2012
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
ISO 17398:2004
|
Safety colours and safety signs — Classification, performance and durability of safety signs |
ISO 4126-1:2013
|
Safety devices for protection against excessive pressure Part 1: Safety valves |
ISO 9809-3:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
IEC 60947-4-1:2009+AMD1:2012 CSV
|
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
IEC 61204:1993+AMD1:2001 CSV
|
Low-voltage power supply devices, d.c. output - Performance characteristics |
IEC 61511-1:2016+AMD1:2017 CSV
|
Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
IEC 60812:2006
|
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
IEC 61131-1:2003
|
Programmable controllers - Part 1: General information |
ISO 15761:2002
|
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
ISO 4672:1997
|
Rubber and plastics hoses Sub-ambient temperature flexibility tests |
IEC 60439-2:2000+AMD1:2005 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) |
CSA 6.22 : 2011
|
LINE PRESSURE REGULATORS |
ISO 14511:2001
|
Measurement of fluid flow in closed conduits Thermal mass flowmeters |
ISO 13852:1996
|
Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
ISO 9300:2005
|
Measurement of gas flow by means of critical flow Venturi nozzles |
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
IEC 60947-5-3:2013
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
UL 1469:2ED 2006-12
|
Standard for Strength of Body and Hydraulic Pressure Loss Testing of Backflow Special Check Valves |
IEC 60947-5-1 : 4.0
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
ISO 20703:2006
|
Gas cylinders Refillable welded aluminium-alloy cylinders Design, construction and testing |
ASME B31.3:2016
|
PROCESS PIPING |
IEC 61204-6:2000
|
Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance |
ISO 14113:2013
|
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
IEC 60335-2-80:2015 RLV
|
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
ANSI B11 TR3 : 2000
|
RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS |
IEC 61508-3:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
ISO 11114-3:2010
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
IEC 60947-7-1:2009
|
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
IEC 60335-2-74:2002+AMD1:2006+AMD2:2009 CSV
|
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters |
ISO 4706:2008
|
Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below |
ISO 14121-1:2007
|
Safety of machinery Risk assessment Part 1: Principles |
IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV
|
Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test |
EN 1330-8 : 1998
|
NON-DESTRUCTIVE TESTING - TERMINOLOGY - TERMS USED IN LEAK TIGHTNESS TESTING |
ISO 7866:2012
|
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
IEC TR 60877:1999
|
Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service |
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
IEC 60364-6:2016
|
Low voltage electrical installations - Part 6: Verification |
ISO 13853:1998
|
Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs |
EN 1779:1999/A1:2003
|
NON-DESTRUCTIVE TESTING - LEAK TESTING - CRITERIA FOR METHOD AND TECHNIQUE SELECTION |
ISO 14847:1999
|
Rotary positive displacement pumps Technical requirements |
EN 13192:2001/AC:2003
|
NON DESTRUCTIVE TESTING - LEAK TESTING - CALIBRATION OF REFERENCE LEAKS FOR GASES |
IEC 61511-3:2016
|
Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
UL 499:14ED 2014-11
|
Electric Heating Appliances |
EN 13625:2001
|
Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
ISO 11114-2:2013
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
IEC 61069-7:2016
|
Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety |
ISO 16528-1:2007
|
Boilers and pressure vessels — Part 1: Performance requirements |
ISO 4126-2:2003
|
Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
IEC 60079-29-2:2015 RLV
|
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
IEC 60947-4-2:2011
|
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
IEC 60439-1:1999+AMD1:2004 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
ISO 9809-2:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
IEC 60034-1:2017
|
Rotating electrical machines - Part 1: Rating and performance |
IEC 60079-14:2013
|
Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
ISO 10790:2015
|
Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
EN 13184:2001/A1:2003
|
NON-DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD |
ISO 11114-4:2017
|
Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
IEC 60300-3-9:1995
|
Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems |
ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
ISO 11119-1:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
ISO 13854:2017
|
Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
ISO 7751:2016
|
Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
UL 429:7ED 2013-11
|
Electrically Operated Valves |
IEC 61131-2:2017
|
Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
ISO 15534-1:2000
|
Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design |
IEC 60947-5-2:2007+AMD1:2012 CSV
|
Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
IEC 60079-30-1:2007
|
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV
|
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
CGA G 4.3 : 2015
|
COMMODITY SPECIFICATION FOR OXYGEN |
IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV
|
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters |
ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies Hydrostatic testing |
ISO 1307:2006
|
Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
IEC 61508-1:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 60947-2:2016
|
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
ISO 834-1:1999
|
Fire-resistance tests Elements of building construction Part 1: General requirements |
ISO 9809-1:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV
|
Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
IEC 60947-4-3:2014
|
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
IEC 60947-6-1:2005+AMD1:2013 CSV
|
Low-voltage switchgear and controlgear - Part 6-1: Multiple functionequipment - Transfer switching equipment |
IEC 61010-1:2010+AMD1:2016 CSV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
ISO 15534-2:2000
|
Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
IEC 60439-3:1990+AMD1:1993+AMD2:2001 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards |
IEC 60445:2017
|
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
IEC 61508-2:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
ISO 8031:2009
|
Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
ISO 11119-3:2013
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
ANSI Z83.8 : 2016
|
GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV
|
Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function |
IEC 60439-5:2006
|
Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
IEC 60335-2-41:2012
|
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |