ISO 11120:2015
Current
Current
The latest, up-to-date edition.
Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
21-01-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 11120:2015 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examinations and tests at manufacture of refillable quenched and tempered seamless steel tubes of water capacities exceeding 150 l up to and including 3 000 l for compressed and liquefied gases exposed to extreme world-wide ambient temperatures, normally between ?50 C and 65 C.
ISO 11120:2015 is applicable to tubes with a maximum tensile strength, Rma, of less than 1 100 MPa. These tubes can be used alone or in batteries to equip trailers or multiple element gas containers (ISO modules or skids) for the transportation and distribution of compressed gases.
ISO 11120:2015 is applicable to tubes having an opening at each end.
| DevelopmentNote |
Supersedes ISO/DIS 11120. (01/2015)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 11120 : 2015 | Identical |
| NEN EN ISO 11120 : 2015 | Identical |
| NS EN ISO 11120 : 2015 | Identical |
| I.S. EN ISO 11120:2015 | Identical |
| PN EN ISO 11120 : 2015 | Identical |
| SN EN ISO 11120 : 2015 | Identical |
| UNI EN ISO 11120 : 2013 | Identical |
| UNI EN ISO 11120 : 2015 | Identical |
| SS EN ISO 11120 : 2015 | Identical |
| BS EN ISO 11120:2015 | Identical |
| UNE-EN ISO 11120:2015 | Identical |
| EN ISO 11120:2015 | Identical |
| NF EN ISO 11120 : 2015 | Identical |
| DIN EN ISO 11120:2015-05 | Identical |
| IS/ISO 11120 : 2015 | Identical |
| DIN EN 16753:2016-09 | GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES |
| I.S. EN 16753:2016 | GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES |
| DIN EN ISO 11114-1:2012-07 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012 + AMD.1:2017) |
| UNE-EN ISO 11114-4:2017 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
| EN 12205:2001 | Transportable gas cylinders - Non refillable metallic gas cylinders |
| DIN EN ISO 11114-4:2017-09 | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017) |
| ONORM EN 12245 : 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| 03/104505 DC : DRAFT FEB 2003 | BS ISO 11114-4 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING METALLIC MATERIALS RESISTANT TO HYDROGEN EMBRITTLEMENT |
| 15/30253325 DC : 0 | BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION |
| I.S. EN ISO 11114-1:2012 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012) |
| I.S. EN ISO 11114-4:2017 | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017) |
| I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
| BS EN 12257:2002 | Transportable gas cylinders. Seamless, hoop-wrapped composite cylinders |
| UNI EN 12245 : 2011 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| 10/30196135 DC : 0 | BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| 15/30288130 DC : 0 | BS EN ISO 11114-4 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT |
| UNE-EN 16753:2016 | Gas cylinders - Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases |
| BS EN 16753:2016 | Gas cylinders. Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases |
| 12/30259634 DC : 0 | BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
| ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
| BS EN ISO 11114-4:2005 | Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents Test methods for selecting metallic materials resistant to hydrogen embrittlement |
| BS EN ISO 11114-1 : 2012 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012) |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
| EN ISO 11114-4:2017 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
| EN 16753:2016 | Gas cylinders - Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| 09/30198861 DC : 0 | BS EN ISO 11114-1 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS |
| BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| DIN EN ISO 11114-4:2015-08 (Draft) | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017) |
| EN 12257:2002 | Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
| ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
| ASME STP-PT-005 : 2006 | DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS |
| ISO 6506-3:2014 | Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
| ISO 10893-5:2011 | Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
| ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 21028-2:2004 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 2: Temperatures between -80 degrees C and -20 degrees C |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ISO 6506-2:2017 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
| ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
| ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| ISO 10893-4:2011 | Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
| ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
| ISO 13769:2007 | Gas cylinders Stamp marking |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.