ISO 11357-1:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
17-02-2023
Superseded by
Language(s)
English, French
Published date
16-09-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 11357-1:2016 specifies several differential scanning calorimetry (DSC) methods for the thermal analysis of polymers and polymer blends, such as
- thermoplastics (polymers, moulding compounds and other moulding materials, with or without fillers, fibres or reinforcements),
- thermosets (uncured or cured materials, with or without fillers, fibres or reinforcements), and
- elastomers (with or without fillers, fibres or reinforcements).
ISO 11357-1:2016 is intended for the observation and measurement of various properties of, and phenomena associated with, the above-mentioned materials, such as
- physical transitions (glass transition, phase transitions such as melting and crystallization, polymorphic transitions, etc.),
- chemical reactions (polymerization, crosslinking and curing of elastomers and thermosets, etc.),
- the stability to oxidation, and
- the heat capacity.
ISO 11357-1:2016 specifies a number of general aspects of differential scanning calorimetry, such as the principle and the apparatus, sampling, calibration and general aspects of the procedure and test report common to all following parts.
Details on performing specific methods are given in subsequent parts of ISO 11357 (see Foreword).
| DevelopmentNote |
Supersedes ISO/DIS 11357-1. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 11357-1 : 2017 | Identical |
| DS EN ISO 11357-1 : 2017 | Identical |
| DIN EN ISO 11357-1:2017-02 | Identical |
| NEN EN ISO 11357-1 : 2016 | Identical |
| NS EN ISO 11357-1 : 2016 | Identical |
| I.S. EN ISO 11357-1:2016 | Identical |
| PN EN ISO 11357-1 : 2016 | Identical |
| SN EN ISO 11357-1 : 2017 | Identical |
| UNI EN ISO 11357-1 : 2009 | Identical |
| SS-EN ISO 11357-1 : 2016 | Identical |
| BS EN ISO 11357-1:2016 | Identical |
| EN ISO 11357-1:2016 | Identical |
| NF EN ISO 11357-1 : 2016 | Identical |
| UNE-EN ISO 11357-1:2017 | Identical |
| DIN EN ISO 11357-1:2016-05 (Draft) | Identical |
| DIN EN ISO 11357-1:2010-03 | Identical |
| SAC GB/T 19466-1 : 2004 | Identical |
| ONORM EN ISO 11357-6 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008) |
| 03/105582 DC : DRAFT APR 2003 | ISO 11357-4 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| BS EN ISO 11357-7:2015 | Plastics. Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics |
| UNE-EN 16806-1:2016 | Textiles and textile products - Textiles containing phase change materials (PCM) - Part 1: Determination of the heat storage and release capacity |
| 12/30257998 DC : 0 | BS ISO 11357-2 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| I.S. EN ISO 11357-7:2015 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015) |
| 17/30350548 DC : 0 | BS EN ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| NF ISO 11357-3 : 2011 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| DIN EN ISO 11357-4 E : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| I.S. EN ISO 11357-5:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION (ISO 11357-5:2013) |
| ISO 15309:2013 | Implants for surgery — Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
| BS ISO 11357-4 : 2005 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| DIN EN ISO 11357-6:2013-04 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008) |
| 16/30343609 DC : 0 | BS ISO 22768 - RUBBER, RAW - DETERMINATION OF THE GLASS TRANSITION TEMPERATURE BY DIFFERENTIAL SCANNING CALORIMETRY (DSC) |
| 12/30267658 DC : 0 | BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS |
| 13/30258014 DC : 0 | BS EN ISO 11358-1 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO/DIS 11358-1:2013) |
| I.S. EN ISO 11357-2:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| BS ISO 22768:2017 | Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
| BS ISO 14322:2012 | Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry |
| SAE J2642_201707 | Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials |
| UNI EN 15860 : 2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| ASTM D 6779 : 2017 : REDLINE | Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
| S.R. CEN ISO/TR 11827:2016 | TEXTILES - COMPOSITION TESTING - IDENTIFICATION OF FIBRES (ISO/TR 11827:2012) |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| BS EN ISO 16103:2005 | Packaging. Transport packages for dangerous goods. Recycled plastics material |
| EN 61189-11 : 2013 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 11: MEASUREMENT OF MELTING TEMPERATURE OR MELTING TEMPERATURE RANGES OF SOLDER ALLOYS |
| VDI 3405 Blatt 1.1:2017-08 (Draft) | Additive manufacturing processes - Laser sintering of polymer parts - Qualification of materials |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| BS EN ISO 11357-5:2014 | Plastics. Differential scanning calorimetry (DSC) Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
| 06/30130313 DC : DRAFT MAR 2006 | ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS |
| DIN EN ISO 11357-7:2015-12 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015); German version EN ISO 11357-7:2015 |
| 12/30244084 DC : 0 | BS ISO 15309 - IMPLANTS FOR SURGERY - DIFFERENTIAL SCANNING CALORIMETRY OF POLY ETHER ETHER KETONE (PEEK) POLYMERS AND COMPOUNDS FOR USE IN IMPLANTABLE MEDICAL DEVICES |
| ISO 14322:2012 | Plastics Epoxy resins Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry |
| UNE-EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| ONORM EN ISO 11357-4 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| BS EN 61189-11:2013 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Measurement of melting temperature or melting temperature ranges of solder alloys |
| BS ISO 15309:2013 | Implants for surgery. Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
| 03/105579 DC : DRAFT APR 2003 | ISO 17744 - PLASTICS - DETERMINATION OF SPECIFIC VOLUME AS A FUNCTION OF TEMPERATURE AND PRESSURE (PVT DIAGRAM) - PISTON APPARATUS METHOD |
| 16/30321526 DC : 0 | BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES |
| BS ISO 28343:2010 | Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC |
| BS ISO 11357-3:1999 | Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization |
| 07/30161721 DC : 0 | BS ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| BS ISO 11357-6 : 2008 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| DIN EN ISO 11357-2:2014-07 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| I.S. EN ISO 11357-6:2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2018) |
| UNI EN ISO 11357-5 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION |
| PREN 15860 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
| EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| EN ISO 11357-3:2018 | Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018) |
| EN ISO 11357-6:2018 | Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018) |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| I.S. EN ISO 21809-2:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014) |
| EN ISO 11357-4:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| VDI 3822 Blatt 2.1.8:2012-01 | Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress |
| VDI 3405 Blatt 1:2013-10 | Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
| PD CEN ISO/TR 11827:2016 | Textiles. Composition testing. Identification of fibres |
| 02/121542 DC : DRAFT MAR 2002 | ISO/DIS 11403-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES |
| UNI EN ISO 11357-3 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| BS ISO 16805 : 2005 AMD 15790 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF GLASS TRANSITION TEMPERATURE |
| UNE-EN ISO 11357-6:2013 | Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008) |
| 08/30177314 DC : DRAFT JAN 2008 | BS ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| 02/122177 DC : DRAFT MAY 2002 | BS ISO 16805 - BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF GLASS TRANSITION TEMPERATURE |
| 09/30208696 DC : 0 | BS EN 61189-11 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 11: MEASUREMENT OF MELTING TEMPERATURE AND MELTING TEMPERATURE RANGES OF SOLDER ALLOYS |
| DIN EN ISO 11357-3:2013-04 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011) |
| UNE-EN ISO 11357-7:2016 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015) |
| 15/30320599 DC : DRAFT JAN 2015 | BS EN 16806-1 - TEXTILES AND TEXTILE PRODUCTS - TEXTILES CONTAINING PHASE CHANGE MATERIALS (PCM) - PART 1: DETERMINATION OF THE HEAT STORAGE AND RELEASE CAPACITY |
| DIN EN ISO 11357-5 E : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION (ISO 11357-5:2013) |
| UNI EN ISO 11358-1 : 2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES |
| UNI EN ISO 23936-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| BS EN ISO 11357-4:2014 | Plastics. Differential scanning calorimetry (DSC) Determination of specific heat capacity |
| PD CEN ISO/TR 22007-5:2014 | Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples |
| UNE-EN ISO 11358-1:2015 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| CEI EN 62788-1-6 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| I.S. EN 16806-1:2016 | TEXTILES AND TEXTILE PRODUCTS - TEXTILES CONTAINING PHASE CHANGE MATERIALS (PCM) - PART 1: DETERMINATION OF THE HEAT STORAGE AND RELEASE CAPACITY |
| I.S. EN 15860:2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| ISO/TR 15655:2003 | Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
| ISO 11357-3:2018 | Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization |
| I.S. EN ISO 11357-4:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| NF ISO 11357-6 : 2011 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| ISO 22768:2017 | Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
| ISO/TR 11827:2012 | Textiles — Composition testing — Identification of fibres |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| UNE-EN 15860:2011 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| DIN EN ISO 16805:2005-07 | Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003) |
| BS EN ISO 21809-2:2014 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings |
| ONORM EN ISO 11357-2 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| EN ISO 21809-2:2014 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
| ONORM EN ISO 11358-1 : 2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014) |
| UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| ONORM EN ISO 11357-7 : 2015 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015) |
| DIN EN ISO 11357-4:2014-10 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| BS EN ISO 11358-1:2014 | Plastics. Thermogravimetry (TG) of polymers General principles |
| PD ISO/TR 18196:2016 | Nanotechnologies. Measurement technique matrix for the characterization of nano-objects |
| UNE-EN ISO 11357-4:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| BS EN ISO 11357-3:2013 | Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| 14/30268127 DC : 0 | BS EN ISO 11357-7 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS |
| DIN EN ISO 11358-1:2014-10 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| 16/30317348 DC : 0 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 11357-2:2015 | Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013) |
| BS EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| 17/30350545 DC : 0 | BS EN ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| DIN EN ISO 11357-5:2014-07 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION (ISO 11357-5:2013) |
| BS EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
| BS ISO 11357-7 : 2002 | |
| 15/30309530 DC : 0 | BS EN 62788-1-6 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE ENCAPSULATION FOR PHOTOVOLTAIC MODULES |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| UNI EN ISO 11357-4 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| 09/30167033 DC : 0 | |
| UNE-EN ISO 11357-5:2015 | Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013) |
| BS ISO 11357-5 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| I.S. EN ISO 11358-1:2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014) |
| I.S. EN ISO 23936-1:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| I.S. EN ISO 11357-3:2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2018) |
| ISO/TR 18196:2016 | Nanotechnologies — Measurement technique matrix for the characterization of nano-objects |
| ASTM E 967 : 2018 : REDLINE | Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| DIN EN ISO 16103:2005-09 | Packaging - Transport packaging for dangerous goods - Recycled plastics material (ISO 16103:2005) |
| ISO 11358-1:2014 | Plastics Thermogravimetry (TG) of polymers Part 1: General principles |
| ISO 21809-2:2014 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN ISO 16805:2005 | Binders for paints and varnishes. Determination of glass transition temperature |
| ISO 16805:2003 | Binders for paints and varnishes — Determination of glass transition temperature |
| ISO/TR 22007-5:2011 | Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples |
| IEC 61189-11:2013 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 11: Measurement of melting temperature or melting temperature ranges of solder alloys |
| ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
| ISO 11357-5:2013 | Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
| EN ISO 11357-2:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013) |
| ISO 11357-4:2014 | Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
| ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| EN 16806-1:2016 | Textiles and textile products - Textiles containing phase change materials (PCM) - Part 1: Determination of the heat storage and release capacity |
| EN ISO 16103:2005 | Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005) |
| EN ISO 11358-1:2014 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
| EN ISO 16805:2005 | Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003) |
| EN ISO 11357-7:2015 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015) |
| EN ISO 11357-5:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013) |
| BS EN ISO 11357-2:2014 | Plastics. Differential scanning calorimetry (DSC) Determination of glass transition temperature and glass transition step height |
| DIN EN 16806-1:2016-07 | TEXTILES AND TEXTILE PRODUCTS - TEXTILES CONTAINING PHASE CHANGE MATERIALS (PCM) - PART 1: DETERMINATION OF THE HEAT STORAGE AND RELEASE CAPACITY |
| UNI EN ISO 21809-2 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS |
| BS EN 16806-1:2016 | Textiles and textile products. Textiles containing phase change materials (PCM) Determination of the heat storage and release capacity |
| ASTM D 3418 : 2015 : REDLINE | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| 12/30258001 DC : 0 | BS ISO 11357-5 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION |
| UNE-EN ISO 21809-2:2015 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
| NF ISO 28343 : 2010 | |
| ASTM D 5138 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
| UNE-EN ISO 11357-3:2013 | Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011) |
| 11/30211364 DC : 0 | BS ISO 14322 - PLASTICS - EPOXY RESINS - DETERMINATION OF DEGREE OF CURE OF CURED EPOXY RESINS BY DIFFERENTIAL SCANNING CALORIMETRY |
| BS PD ISO/TR 11827 : 2012 | TEXTILES - COMPOSITION TESTING - IDENTIFICATION OF FIBRES |
| I.S. EN 61189-11:2013 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 11: MEASUREMENT OF MELTING TEMPERATURE OR MELTING TEMPERATURE RANGES OF SOLDER ALLOYS (IEC 61189-11:2013 (EQV)) |
| 07/30150249 DC : 0 | BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| BS EN 15860:2010 | Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods |
| BS ISO 11357-2 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| S.R. CEN ISO/TR 22007-5:2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011) |
| UNI EN ISO 11357-2 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| ISO 28343:2010 | Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC |
| I.S. EN 62788-1-6:2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| DIN EN 15860:2016-07 (Draft) | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| CEN ISO/TR 11827:2016 | Textiles - Composition testing - Identification of fibres (ISO/TR 11827:2012) |
| EN 15860:2010 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| ISO 11357-7:2015 | Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics |
| ISO 16103:2005 | Packaging — Transport packaging for dangerous goods — Recycled plastics material |
| CEN ISO/TR 22007-5:2014 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011) |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 80000-5:2007 | Quantities and units Part 5: Thermodynamics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.